Syntheses and Crystal Structures of Two New Macrocyclic Compounds

Two new macrocyclic compounds, [Cu2(L)2](ClO4)4·2CH3OH (1) and [Cu(L)](ClO4)2·2H2O (2) (L = 1,3,10,12,15,18-hexaazatetracyclodocosane) were synthesized by condensation reactions involving amines and formaldehyde in the presence of copper anion. Compound 1 crystallizes in triclinic, space group Pí with a = 10.442(2), b = 14.197(3), c = 17.388(4), α = 91.218(4), β = 90.69(3), γ = 93.756(4)o, V = 2520.4(9)3, Z = 2, F(000) = 1260, Dc = 1.589 Mg/m3, Mr = 1205.92, μ = 1.137 mm-1, λ = 0.71073, the final R = 0.0668 and wR = 0.1573 for 9703 observed reflections with I > 2σ(I). Compound 2 crystallizes in monoclinic, space group C2/c with a = 16.911(2), b = 11.4172(15), c = 27.059(4), β = 107.787(2)o, V = 4974.7(12)3, Z = 8, F(000) = 2504, Dc = 1.610 Mg/m3, Mr = 602.92, μ = 1.155 mm-1, λ = 0.71073 , the final R = 0.0419 and wR = 0.1131 for 4374 observed reflections with I > 2σ(I).     

Effect of Plasma Treatment on the Structures and Properties of Konjac Glucomannan Film

To understand the effect of plasma treatment on the Konjac glucomannan film, the nitrogen plasma was injected into the film by ion beam injection machine in this study. The structures and properties of Konjac glucomannan film after plasma treatment were analyzed by Infrared spectroscopy, Raman spectrum, X-ray, ect. The result showed that nitrogen groups appeared in the KGM molecular chain and part of this chain fractured, and the number of hydrogen bonds increased after the treatment of plasma. The form of KGM molecule remained amorphous non-crystalline state, but the crystalline region was increased and became more ordered. The mechanical property of tensile strength and breaking elongation was improved, while the WVP was decreased. The nitrogen groups were grafted on the KGM molecular chain after plasma treatment, which led to the improvement of the properties of KGM film.     

Effect of Precursor Drying Process on the Properties of LiFePO4/C Composite with Low Carbon Content

<正>Properties of two LiFePO_4/C composites with low carbon content synthesized from precursors dried by spray drying and blast drying are investigated by scanning electron microscopy, X-ray diffraction, Raman spectroscopy and electrochemical measurements. The two samples have a different morphology and particle size, while the structure of LiFePO_4 is unaffected. The LiFePO_4/C composite prepared from the precursor dried by blast drying has a much lower surface resistance and a much better rate capability because the deposited carbon is more graphite-like and more conductive. The cycling performance is also much better for the LiFePO_4/C composite prepared from the precursor dried by blast drying because only a slight impedance growth is involved upon cycling. These results suggest that the precursor drying process has a significant impact on the properties of LiFePO_4/C composite, and its effect is highly dependent on the carbon content.     

拉曼光谱法定量分析焦磷酸根离子的含量

应用拉曼光谱技术研究了焦磷酸钾、硝酸钾、磷酸二氢钾、乙二胺四乙酸钠等十余种可溶性盐水溶液以及它们的混合物溶液的拉曼光谱特征,考察了共存组分对焦磷酸根拉曼光谱特征峰的影响;建立了基于拉曼光谱技术定量分析溶液中焦磷酸根离子含量的方法。结果表明,以硝酸钾为内标物,保持被测溶液pH 11,焦磷酸根离子拉曼光谱特征峰强度与硝酸根离子拉曼光谱特征峰强度之比值对焦磷酸根浓度呈良好的线性关系,所得线性回归方程为y=1.2110x+0.1515,相关系数R2=0.9996;已经研究过的十余种可溶性盐共存物几乎不干扰焦磷酸根离子的定量分析。     

凝胶渗透净化/液相色谱串联质谱法测定动物源肝脏中4种β-激动剂的残留量

采用凝胶渗透净化技术,建立了用高效液相色谱串联质谱法同时测定动物源肝脏中克伦特罗、沙丁胺醇、莱克多巴胺、特步它林残留量的方法。样品经β-葡萄糖苷酸酶水解后,用乙酸铵溶液提取,MCX固相萃取柱和全自动凝胶渗透净化色谱仪净化,采用选择离子监控模式(SIM)检测,内标法定量。克伦特罗在0.1～10 ng/mL、莱克多巴胺、沙丁胺醇、特布他林在1～100 ng/mL质量浓度范围内呈良好的线性关系,相关系数(r2)均大于0.999;方法的检出限和定量限分别在0.003～0.02μg/kg和0.009～0.06μg/kg之间,方法的回收率为94.7%～106.1%,相对标准偏差小于7.8%。适用于动物肝脏中克伦特罗、沙丁胺醇、莱克多巴胺、特步它林的确认和定量检测。     

高精密恒电流库仑法测定CCQM-K73国际关键比对盐酸溶液中H+含量

采用高精密恒电流库仑法测量了CCQM-K73国际比对样品盐酸溶液含量。该方法是国际上公认的基准测量方法,根据法拉第电解定律,通过质量、电阻、电动势、时间等基本物理量及法拉第常数来进行样品的测定,直接溯源到国际SI单位,不需要用标准物质进行比对。中国计量科学研究院作为国家化学计量最高溯源,参加了该项关键比对,并取得了等效一致的好成绩。     

基于氧化石墨烯识别特定双螺旋DNA

依据三螺旋DNA的形成,以氧化石墨烯为基础建立了一种识别特定序列双螺旋DNA的方法。单链探针DNA能够通过静电引力作用吸附在氧化石墨烯表面,标记在单链DNA末端的荧光探针分子TAMRA由于荧光能量共振转移作用使得其荧光发生淬灭。加入目标双螺旋DNA后,单链探针DNA与目标DNA分子形成三螺旋DNA,探针DNA从氧化石墨烯表面脱附,标记在探针DNA上的荧光分子的荧光恢复。在最佳实验条件下,荧光恢复的强度与探针DNA的浓度在20.0～300.0 nmol/L具有良好的线性关系,检出限为16.9 nmol/L。该方法在DNA药物筛选及基因疾病的诊断方面具有一定的应用前景。     

主成分分析-近红外光谱法快速测定婴儿配方乳粉中必需脂肪酸

利用主成分分析法将婴儿乳粉的近红外光谱数据与必需脂肪酸含量建立校正模型,并采用交互验证和外部检验两种方式来考察模型的可靠性。得到模型校正相关系数(R2)0.8704,均方估计残差(RMSEC)和交互校验均方残差(RMSECV)分别为0.6275和0.8907,应用所建立的必需脂肪酸近红外模型对婴儿乳粉必需脂肪酸含量进行预测,并将预测值和化学测量值进行配对t检验,结果表明两者无显著差异。     

冷冻去脂-液液分配净化/气相色谱-质谱法测定化妆品中16种多环芳烃

建立了保湿护肤系列化妆品中16种多环芳烃的气相色谱-质谱测定法。对于水剂样品,采用环己烷提取、浓缩等简单前处理;对于膏霜剂样品,采用乙腈+丙酮(8+2,V/V)涡旋提取样品中的待测物,提取液经冷冻去脂、液液萃取净化(氨水-环己烷、水-环己烷),气相色谱-质谱法测定。16种多环芳烃在1～50μg/L均与对应峰面积呈良好线性关系。添加量在1～50μg/kg时,平均回收率(n=6)为78.1%～103.7%,相对标准偏差为2.4%～7.1%,方法检测限为1～10μg/kg。该法可用于化妆品中16种多环芳烃的测定。     

新型磁性荧光Fe3O4-CdSe纳米复合材料的制备

以1-十八烯作为高沸点溶剂, 在磁性粒子表面沉积量子点获得新型的磁性荧光Fe₃O₄-CdSe 纳米异质结构. 首先以乙酰丙酮铁(Fe(acac)₃)为前驱体, 二苯醚为溶剂, 油酸为表面活性剂和油胺(OAm)为表面活性剂兼还原剂, 通过溶剂热法制备单分散性的Fe₃O₄ 纳米粒子. 然后以1-十八烯为高沸点溶剂, CdO 为镉源,TOP-Se为硒源, 十六胺为表面活性剂以及硬脂酸为生长促进剂和成核剂制备得到新型的Fe₃O₄-CdSe纳米异质结构. 通过透射电镜(TEM), 傅里叶变换红外(FTIR)光谱, X射线衍射(XRD)谱, X射线光电子能谱(XPS)分析仪, 振动样品磁强计(VSM), 紫外-可见(UV-Vis)光谱和光致发光(PL)等手段对Fe₃O₄-CdSe 纳米复合材料的结构和性能进行表征. 结果表明, CdSe纳米粒子成功地吸附在Fe₃O₄纳米粒子表面, 并沿着c轴生长, 形成了宽3.6 nm, 长分别为14.5 和32.5 nm的新型枣核状和钉子状的异质结构体. 这种新型的Fe₃O₄-CdSe纳米复合材料是由磁铁矿Fe₃O₄和六方形的CdSe棒状结构组成, 具有较好的荧光性能和超顺磁性. 随着CdSe棒长度的增加, 荧光吸收峰向长波方向移动. Fe₃O₄纳米粒子, 枣核状和钉子状的Fe₃O₄-CdSe纳米复合材料的饱和磁化强度分别是57.80, 40.76和31.10 emu·g^-1.