4′-乙酰基苯并-15-冠-5缩氨基硫脲的微波合成及晶体结构

硫脲衍生物主要通过氢键与阴离子相互作用达到识别的目的，冠醚和硫脲两个主体分子亚单元之间的协同作用往往使冠醚和硫脲表现出对某些客体更加优越的络合识别能力，我们在以前工作的基础上，微波辐射下合成了标题化合物并用红外光谱、核磁共振氢谱、元素分析、X射线单晶衍射对其结构进行了表征，欲进一步研究其对阳离子和阴离子识别的双重功效。     

Characterization of the Nanoscale Microstructure of an Immersion Silver on Sputtered Copper

1 INTRODUCTION Silver and its compounds have received much attention due to their current and potential applica- tions in many areas[1, 2]. As a metal with the highest electrical and thermal conductivities, silver was one of the most important noble metals used in electrical industries in the last century. Several decades ago, however, the development of silver application in electronic area seemed not so quick. The fear for some undesirable phenomena involving silver, like “electrochemi…     

杂多阴离子[GeMo12O40]4-α/β异构体的密度泛函研究

采用密度泛函方法，在DND基组水平上，对[GeMo12O40]^4-杂多阴离子最常见的α和β异构体进行了几何构型优化，得到了与X射线晶体衍射实验结果相一致的结构参数，并在此基础上进行了振动频率分析，得到了杂多阴离子的电子结构、热力学特性和振动光谱，通过定义α，β异构体异构化反应的Gibbs函变△Gα-β与温度的关系，研究了这两种异构体的相对稳定性．结果表明：低温时α异构体更稳定，高温时β异构体更稳定些，550K左右为转变点．振动频率分析得到2种异构体的最强峰位于4个频率位置，分别指认为vax(Mo-Od)，vas(Mo-Od)，vas(Mo-Oc-Mo)，vas(Ge-Oa)，vas(Mo-Ob-Mo)振动，与红外光谱(IR)的特征振动峰相对应，观察到了特征频率的振动模式，从理论计算角度说明了Rocchiccioli—Deltcheff关于振动模式的设想是合理的．     

太阳CO 4.6微米红外成像观测

太阳红外光谱中蕴含着丰富的物理信息,其中CO 4.6μm波段是具有代表性的分子谱带,其形成于温度极小区附近,对研究太阳物理具有极其重要的意义。为获得CO 4.6μm波段太阳单色像,本文建立了一套全反射太阳红外成像观测系统。该系统采用定天镜跟踪引光,通过成像反射镜将太阳成像于3~5μm波段红外相机的焦平面上,该相机采用的是国产HgCdTe焦平面阵列器件。同时,为提高信噪比,提出了一种有效计算平场提取观测目标的方法,并利用该方法获得了CO 4.6μm波段的太阳单色像。     

白血病骨髓移植病人全血微量元素铜的变化及其意义

为了研究白血病骨髓移植病人全血微量元素铜的变化及其意义 ,用原子吸收光谱法检测了正常对照组与白血病骨髓移植患者预处理前及移植后骨髓空虚期全血微量元素铜的含量。结果表明 ,正常对照组全血铜浓度与白血病骨髓移植患者预处理前全血铜浓度差异无显著性 (P >0 0 5 ) ,而与骨髓空虚期全血铜浓度有显著性差异 (P <0 0 5 ) ,说明白血病缓解后血铜接近正常对照组水平 ,而白血病骨髓移植患者预处理后骨髓空虚期全血铜含量高于正常对照组 ,说明预处理影响微量元素铜的代谢 ,本文就其影响机理进行了研究     

A simulation of thermal characteristic parameters with an inverse “S” type curve

A synthetical equation is proposed to characterize the essential features of the inverse “S” type curve on the basis of summing-up simulation approach of “S” type curve. The two physical variables in the model obtained are discussed and the detailed method used to determine the parameters is given. The model is then presented to describe the crystallization of poly(caryleher ether ketone) (PEEK) and thermal decomposition of poly(amide-imide) (PAI) respectively. It is found that some thermal characteristic parameters can be well estimated from the model simu-lated in computer.     

掺杂电活性离子聚吡咯膜内的电荷传输

用循环伏安法和计时库仑法研究了掺杂亚铁氰化钾离子的聚哟咯膜内的电荷传输问题。实验结果表明，聚吡咯膜内的电荷传递可以处理成电子在膜内的扩散模型，电荷传递速度可以 用电子表观扩散系数（Ｄａｐｐ）来表征。Ｄａｐｐ的大小由聚合物膜的结构、电活怀离子之间的过及对离了在膜中的运动决定。     

LiCoO_2 electrode/electrolyte interface of Li-ion batteries investigated by electrochemical impedance spectroscopy

The storage behavior and the first delithiation of LiCoO2 electrode in 1 mol/L LiPF6-EC:DMC:DEC elec- trolyte were investigated by electrochemical impedance spectroscopy (EIS). It has found that, along with the increase of storage time, the thickness of SEI film increases, and some organic carbonate lithium compounds are formed due to spontaneous reactions occurring between the LiCoO2 electrode and the electrolyte. When electrode potential is changed from 3.8 to 3.95 V, the reversible breakdown of the resistive SEI film occurs, which is attributed to the reversible dissolution of the SEI film component. With the increase of electrode potential, the thickness of SEI film increases rapidly above 4.2 V, due to overcharge reactions. The inductive loop observed in impedance spectra of the LiCoO2 electrode in Li/LiCoO2 cells is attributed to the formation of a Li1-xCoO2/LiCoO2 concentration cell. Moreover, it has been demonstrated that the lithium-ion insertion-deinsertion in LiCoO2 hosts can be well described by both Langmuir and Frumkin insertion isotherms, and the symmetry factor of charge transfer has been evaluated at 0.5.     

无机胺合成ZSM-5沸石的结构表征和催化作用

分别以氨水和正丙胺为模板剂 ,在 177℃温度下静止晶化 5 0小时 ,合成出ZSM - 5沸石分子筛 .经XRD和IR测试 ,两者具有基本相同的结构 ;TG -DSC分析证明 ,两者都具有优良的热稳定性 .由于有机胺易氧化分解 ,故使得后者的腔内包含物氧化放热峰前移约 4 0℃ .合成的ZSM - 5沸石经用不同离子交换后 ,用于催化己烷芳构化反应     

制备高比表面积碳化硅的几种影响因素

采用溶胶凝胶法，以蔗糖和正硅酸乙酯(TEOS)为原料，草酸为TEOS水解的催化剂，制备均相碳化硅前驱体，在氩气氛和高温条件下(1 350～1 600 ℃)将碳化硅先驱体进行碳热还原，制备出高比表面积的SiC。考察了水/TEOS物质的量的比、碳/硅物质的量的比及镍盐等因素对碳化硅比表面积的影响。结果表明，当n_water/n_TEOS=7.5，n_C/n_Si=4时，适宜的镍催化剂(n_Ni/n_TEOS=0.005)，凝胶形成的时间最短，镍盐的加入可使碳热还原温度降低200 ℃。