基于Linux的Socket网络编程的性能优化

介绍在Linux操作系统环境下Socket网络编程的原理、流程和最终实现。编程采用客户端,月艮务器模式。提出解决多个客户端连接服务器时无法处理I／O多路复用问题的方法。提出通过最小化报文传输来减少传输时延．为BandwidthDelayProduct调节TCP窗口,实现充分利用带宽提高Linux的Socket性能。在实际网络传输环境复杂多变的情况下,达到优化网络传输性能的目的。     

微小型放入式电子测压器的研究

为满足多种火炮、弹箭内弹道压力参数测试需求,研制微小型放入式电子测压器。介绍研制微小型放入式电子测压器的现实背景和意义,阐述测试系统的工作原理,详细分析整个系统工作状态设计及实现．并给出该系统的典型应用。该测压器功耗低、体积小、能够承受600MPa压力,可在现场实时实况地记录被测弹体射击过程膛压变化状况,并能够在系统掉电的情况下保持测试所得的数据,便于回收上电后准确的回放所记录的数据以供分析。     

Energy efficiency based multi-relay selection and power allocation in OFDM cooperation networks

Getting along with the improvement of green communications, the energy efficiency （EE） of wireless network becomes more and more important. However, in nmlti-relay-assisted systems, the related work obviously depends on the end-to-end performance, whereas EE of relays has not attracted enough attention. The authors propose an orthogonal frequency division multiplexing （OFDM） multi-relay system based on amplify and forward （AF） mode. Taking incorporating EE and remaining energy as factor, decision criteria of attending cooperation is designed. The EE based asynchronous power iteration method is presented, and the existence and convergence of nash equilibrium （NE） is proven. Furthermore, a joint algorithm in subcarrier pairing, relay selection and power allocation is given. Genetic algorithm （GA） and iteration method are integrated to improve the convergence speed additionally. Simulation demonstrates the obvious improvement of EE, decrease of power consumption and increase of lifetime in relays of this algorithm with the constraint of minimum data transmission rate.     

Credibility protection for resource sharing and collaborating in non-center network computing environments

Non-center network computing environments have some unique characteristics, such as instability, heterogeneity, autonomy, distribution and openness, which bring serious issues of security and reliability. This article proposes a brand-new credibility protection mechanism for resource sharing and collaboration in non-center network computing environments. First, the three-dimensional hierarchical classified topology （3DHCT） is proposed, which provides a basic framework for realizations of the identity credibility, the behavior credibility and the capability credibility. Next, the agent technology is utilized to construct the credibility protection model. This article also proposes a new comprehensive credibility evaluation algorithm with simple, efficient, quantitative and able to meet the requirements of evaluating behavior credibility and the capability credibility evaluation as well. The Dempster-Shafer theory of evidence and the combination rule are used to achieve the evaluation of the capability credibility. The behavior credibility is evaluated with the current and historical performance of nodes for providers and consumers to realize more accurate prediction. Based on the non-center network computing simulation test platform, simulation is been conducted to test the performance and validity of the proposed algorithms. Experiment and analysis show that the proposed algorithms are suitable for large-scale, dynamic network computing environments, and able to maintain the credibility for networks without relying on central node, make a non-center network gradually evolve into an orderly, stable and reliable computing environment efficiently.     

一种新型离散指数混沌映射的实现及其研究

针对Logistic映射参数简单、混沌区间范围小的缺点,提出一种新型的离散指数混沌映射。通过引入指数项和增加参数个数,进而扩大映射的混沌区间。利用常规的动力学分析方法,对指数混沌映射进行了动力学特性分析,包括Lyapunov指数图、分岔图等。在此基础上,对Logistic映射和离散指数混沌映射进行了特性比较。最后对由该离散混沌映射产生的序列进行NIST测试,测试结果表明序列性能更良好。     

中压单芯交联电缆护套松弛问题的解决措施

交联聚乙烯绝缘电缆在制造过程中,绝缘线芯放置时间不够,绝缘线芯中气体未充分释放出来,就直接进行下道工序会引起电缆外护套松弛。针对中压单芯交联聚乙烯绝缘电缆出现这种情况的原因进行了分析,并提出解决的措施。     

基于单片机控制的六自由度自动寻迹机械人的设计与实现

随着自动化技术的普及,为了解决工厂劳动力缺乏的问题,利用MSP430芯片控制能力强,设计灵活,以及编程语言易于修改等优点,采用软件设计和硬件设计相结合,设计了该六自由度自动寻迹机械人,以便进行物料搬运工作,利用编辑器运行程序、调试时间、运行的步骤,将写好的程序导入仿真硬件电路中,查看是否与设计要求的一致,该设计具有性能稳定,功耗低,价格低廉,安全可靠,操作方便等特点.     

一种智能化ARINC429通讯卡设计与实现

介绍了一种基于ARM微处理器的ARINC429航空总线通讯卡的设计方法,以实现两发四收的信息控制.该设计以LPC3250作为嵌入式微处理器,采用DEI1016/BD429芯片组构建ARINC429总线通讯系统,为航空电子系统提供了高效可靠的通信平台.     

单、重瓣玉簪花器官分化和花形态学比较研究

以单瓣和重瓣玉簪为试验材料,采用石蜡切片法和显微技术研究了其花器官分化和花形态发育过程的差异,为进一步研究单、重瓣玉簪形成的分子机制奠定形态学基础。结果表明:(1)单瓣花和重瓣花的花芽分化过程均可分形态分化前期、被片原基分化期、雄蕊原基分化期、雌蕊原基分化期4个时期,各轮花器官按照向心顺序发育。(2)单瓣花包含6枚呈两轮排列的花被片、6枚雄蕊和1枚雌蕊,而重瓣花包含6枚呈两轮排列的花被片,6枚由雄蕊同源转化成的被片,中央心皮愈合不完整。     

一种新型任意多模移位计数器

提出了一种新型移位计数器,用实例讨论了各种双模、多模移位计数器的设计。因为移位计数器的设计可查已有的反馈函数表达式,所以十分容易。这种新型移位计数器不仅可以用于在吞脉冲技术中提高前置分频器的工作速率,而且特别适宜在有较大延迟的反馈控制系统中使用。