Tuning the band gap of the CIGS solar buffer layer Cd1-xZnxS (x=0—1) to achieve high efficiency

To evaluate the impact of zinc sulfate (ZnSO4) concentration on the structural properties of the films, Cd1-xZnxS thin films were formed on glass substrates using chemical bath deposition (CBD) in this study. The effect of ZnSO4 precursor concentration on the surface morphology, optical properties, and morphological structure of the Cd1-xZnxS films was investigated. To study the impact of zinc doping content on the performance metrics of Cu(In1-xGax)Se2 (CIGS) cells in the experimental group and to improve the buffer layer thickness, simulations were run using one-dimensional solar cell capacitance simulator (SCAPS-1D) software.     

Analysis of light propagation characteristic in the aero-optic flow field of cone-headed vehicle with side window

Aero-optic imaging deviation research is carried out for infrared-guided vehicle with cone-head side window, with a focus on the propagation characteristics of light in an aero-optic flow field. When the light entering the aero-optic flow field from the free-stream should be close to the normal, numerous data indicate that the light is refracted away from the normal. This paper divides the aero-optic flow field into two parts and uses the gas density distribution in the aero-optic flow field to ...     

基于规范图像的光电成像系统采样响应研究北大核心CSCD

为了研究采样响应对光电成像系统生成图像的质量的影响,本文提出了将规范图像作为输入建立封闭的模型来分析采样响应的方法。首先给出了规范图像的定义并得到了USAF 1951规范图像的数学模型,然后分析了光电成像系统的采样响应过程和采样响应函数,最后讨论了USAF 1951规范图像在不同条件下的采样响应结果。研究结果表明:当采样前MTF截止频率、采样频率与采样后MTF截止频率之间的关系不同时,采样响应对像质的影响不同;当采样频率与采样前MTF截止频率满足一定的条件时,可在图像模糊与混叠之间取得平衡。     

能量注量对钛板激光着色的颜色变化影响研究北大核心CSCD

各种激光工艺参数共同作用影响激光彩色打标的结果,不同参数之间相互关系比较复杂。为了获得更优质颜色和基于TA2钛板上更全的激光着色色谱,本实验选用波长为1064 nm、最大输出功率为20 W的MOPA光纤激光器进行试验,通过分光测色仪对彩色样品的色彩、可见光谱进行采集分析。结果表明,通过简化参数间关系,以能量累计注量的变化量dQ产生的色差为依据,调节扫描速度、线间距、功率变化量dP来改变dQ大小,能够获得更丰富的颜色。     

嵌埋材料对分布式布拉格反射镜腔共振模式的影响

低维材料嵌入微腔已经广泛应用于纳米激光器和探测器等。为了实现增益材料和光学微腔之间的有效耦合,需要深入研究嵌埋材料对腔共振模式的影响。本文主要讨论了嵌埋材料的厚度、位置、腔层厚度以及分布式布拉格反射镜的对数对腔供着模式的影响。结果表明,腔共振模式随嵌埋材料位置的不同呈现周期性变化并且在λ/2光程周期内存在最大峰位移。最大峰位移随腔层厚度增加而减小,但与嵌埋材料的厚度成正比。分布式布拉格反射镜的对数不影响腔共振模式。这些结果为光学器件的设计和实验现象的分析提供了指导,并且可以应用于不同波长分布式布拉格反射腔结构。     

InPBi禁带下红外光致发光效率的Bi组分依赖研究

稀Bi半导体InPBi的光致发光（Photoluminescence, PL）主要来自缺陷能级跃迁过程,具有红外长波长、大线宽和高辐射强度等特点,因而引发广泛兴趣。针对InPBi的红外发光效率问题,本文研究了不同Bi组分InPBi的激发功率依赖红外PL光谱演化规律。实验发现,随着Bi组分增大,PL线型发生显著变化,导致发光波长总体红移;同时激发功率依赖的PL积分强度演化分析表明,发光效率随Bi组分先增大然后下降,在0.5%组分时发光效率达到峰值。发光效率增大一方面归因于Bi捕获空穴降低非辐射复合,另一方面来自Bi的表面活性剂效应;而高Bi组分引入过多缺陷从而抑制了Bi的优势,导致发光效率下降。这些结果或有助于理解InPBi的红外发射性能,表明InPBi具有红外光电子应用前景。     

Blood cell counting based on U-Net++ and YOLOv5

Clinical information about a variety of disorders is available through blood cell counting, which is usually done by manual methods. However, manual methods are complex, time-consuming and susceptible to the subjective experience of inspectors. Although many efforts have been made to develop automated blood cell counting algorithms, the complexity of blood cell distribution and the highly overlapping nature of some red blood cells (RBCs) remain significant challenges that limit the improvement of analytical accuracy. Here, we proposed an end-to-end method for blood cell counting based on deep learning. Firstly, U-Net++ was used to segment the whole blood cell image into several regions of interest (ROI), and each ROI contains only one single cell or multiple overlapping cells. Subsequently, YOLOv5 was used to detect blood cells in each ROI. Specifically, we proposed several strategies, including fine classification of RBCs, adaptive adjustment for non-maximal suppression (NMS) threshold and blood cell morphology constraints to improve the accuracy of detection. Finally, the detection outcomes for each ROI were combined and superimposed. The results show that our method can effectively address the issue of high overlap and precisely segment and detect blood cells, with a 98.18% accuracy rate for blood cell counting.     

Structural, electrochemical and cycling properties of Nb5+ doped LiNi0.8Co0.1Mn0.1O2 cathode materials at different calcination temperatures for lithium-ion batteries

LiNi0.8Co0.1Mn0.1O2 cathode material is prepared by sol-gel method and the effects of Nb5+ doping and different calcination temperatures on cathode materials were deeply investigated. Structural and morphological characterizations revealed that the optimal content of 1 mol% Nb5+ can stabilize layered structures, mitigate Ni2+ migration to Li layers, improve lithium diffusion capacity, and reduce lattice expansion/shrinkage while cycling. And calcination temperature at 800 °C can not only ensure good morphology, but also suppress the mixed discharge of lithium and nickel in the internal structure. Electrochemical performance evaluation revealed that Nb5+ doping improves the discharge-specific capacity of the material, which is conducive to ameliorating its rate capability and cycle performance. And the material at 800 °C exhibits the highest discharge specific capacity, the best magnification performance, low polarizability, and the best cycle reversibility.     

一种3D眼镜虚拟试戴系统的实现

针对人脸图像试戴3D眼镜过程中存在的镜腿遮挡人脸问题,文中提出一种基于人脸图像的3D眼镜虚拟试戴技术。利用构建的人脸形状的三维模型,使其在虚拟试戴中对镜腿起到消隐作用,解决镜腿的遮挡问题。文中对输入的人脸图像进行关键点检测,结合Graham扫描法求得人脸形状的凸多边形,利用平移扫描构建人脸形状的三维模型。此外,文中根据定位人脸图像上的关键点以及姿态估计后对三维眼镜模型的变换,将眼镜模型佩戴到人脸图像上。实验结果表明,该方法对于多视角的人脸图像实现了虚拟试戴效果,解决了多种视角下人脸图像试戴过程中镜腿的遮挡问题,虚拟试戴中镜腿遮挡平均准确率为94.5%,遮挡精度较高。     

基于MATLAB GUI图像处理仿真系统的设计

文中简述了图像处理的各种基本功能及原理,并通过MATLAB的GUI图形用户开发工具,设计了一款基于MATLAB的图像处理仿真系统,该系统包含图像处理的一些常见且实用的功能,如空域滤波中的高斯滤波、中值滤波、均值滤波,频域滤波中的高低通滤波、带阻滤波、同态滤波,还有边缘算子、灰度、二值化、简单直方图等功能。由于MATLAB GUI操作简单,便于扩展,减少了代码编写量,且人机交互性强,图像处理部分功能参数可调,因此在教学、实验、工程中具有较高的应用价值。