GPS/SINS组合导航系统在运载火箭中的应用

针对运载火箭特点,着重研究在发射惯性坐标系下,位置、速度组合模式的GPS/SINS组合导航算法,推导了该坐标系下的惯导一阶误差传播方程,建立了该坐标系下GPS/SINS组合导航系统的状态方程和观测方程,并进行了相关数学仿真验证。仿真结果表明,在该坐标系中,GPS/SINS组合导航算法能较准确地给出运载火箭的位置、速度和姿态信息,提高运载火箭制导精度。     

TUHF代数上的Lie导子

证明了TUHF代数丁上的Lie导子L形如D l．其中D是T上的结合导子，l是从T到它的中心Z上的线性映射且零化T中的括积．     

热力膨胀阀在空气源热泵热水器系统中稳定特性的实验研究

本文对热力膨胀阀在空气源热泵热水器的稳定特性进行了实验研究.通过不同热力膨胀阀开度下的实验数据,分析了热力膨胀阀在系统中的稳定特性.分析了热力膨胀阀在空气源热泵热水器全年运行工况中存在的局限性.提出保证系统稳定运行的方法与建议;指出制冷剂充注量是系统稳定运行的另一个重要因素,只有同时很好地把握住热力膨胀阀开度和制冷剂充注量,才可能使系统运行在最佳工况.     

直线加速器驻波腔中的瞬态束流负载效应

在高能加速器中, 随着单个束团和束团串中电荷量的提高, 当粒子束穿过加速腔的时候, 感应出的瞬态束流负载电压也越来越高. 但是, 在通常分析束流负载的时候, 往往对稳态束流负载研究的比较多, 而对瞬态束流负载的研究要相对少一些. 本文首先对束流负载的瞬态特性和束团穿过加速腔时高频源所看到谐振腔谐振频率的变化方式进行了分析, 然后又对两种情况下谐振腔的最优失谐条件进行了讨论, 并给出了相应的解析公式. 在第1种情况下, 当粒子束穿过加速腔的时候, 谐振腔的自然谐振频率能够及时地得到调节, 从而使高频源的电流与谐振腔的腔压同相, 以提高高频源的效率; 在第2种情况下, 当粒子束穿过加速腔的时候, 谐振腔的自然谐振频率保持不变, 不能被调节. 最后, 还对BEPCⅡ现有预注入器的预聚束腔、BEPCⅡ未来预注入器的两个次谐波聚束腔中的瞬态束流负载效应进行了分析.     

�۱��ƫ��������ˮ��������ǿ�����������о�

By using Fluent software with the Eulerian multiphase model and Non-equilibrium boiling model, the subcooled flow boiling heat transfers was numerically simulated in the plain upward vertical tubes under the condition of one-side heating. The influences of the different mass flux, inlet temperatures and heat flux on the heat transfer coefficient, the void fraction and heat transfer deterioration were investigated.     

Prisoner＇s Dilemma Game with Heterogeneous Influential Effect on Regular Small-World Networks

The effect of heterogeneous influence of different individuals on the maintenance of co-operative behaviour is studied in an evolutionary Prisoner＇s Dilemma game with players located on the sites of regular small-world networks. The players interacting with their neighbours can either co-operate or defect and update their states by choosing one of the neighbours and adopting its strategy with a probability depending on the pay off difference. The selection of the neighbour obeys a preferential rule： the more influential a neighbour, the larger the probability it is picked. It is found that this simple preferential selection rule can promote continuously the co-operation of the whole population with the strengthening of the disorder of the underlying network.     

Bianchi Type-Ⅲ String Cosmological Model With Bulk Viscosity and Magnetic Field

The Bianchi type-Ⅲ cosmological model for a cloud string in the presence of bulk viscosity and magnetic field are presented. To obtain the determinate model it is assumed that there is an equation of state ρ = kA and the scalar of expansion is proportional to the shear scalar θ ∝ σ, which leads to a relation between metric potentials B = mC^n. The physical and geometric aspects of the model are also discussed. The model describes a shearing non-rotating continuously expanding universe with a big-bang start. In the absence of magnetic field, it reduces to the string model with bulk viscosity that was previously given in the literature.     

Reduction of Dislocations in GaN Epilayer Grown on Si （111） Substrates using a GaN Intermedial Layer

GaN intermedial layers grown under different pressures are inserted between GaN epilayers and AIN/Si（111） substrates. In situ optical reflectivity measurements show that a transition from the three-dimensional （3D） mode to the 2I） one occurs during the GaN epilayer growth when a higher growth pressure is used during the preceding GaN intermedial layer growth, and an improvement of the crystalline quality of GaN epilayer will be made. Combining the in situ reflectivity and transmission electron microscopy （TEM） measurements, it is suggested that the lateral growth at the transition of growth mode is favourable for bending of dislocation lines, thus reducing the density of threading dislocations in the epilayer.     

具有突变结构开放腔的矩阵分析

利用模式展开与场匹配原理，建立了突变波导的散射矩阵(S参数矩阵)，在此基础上分析研究了具有突变结构的波导开放式谐振腔，并由矩阵级联建立了开放腔总的S参数矩阵.通过Matlab编制计算程序对具有多级突变结构的开放式输出腔进行了数值计算和分析，并通过与实验数据和软件模拟的结果比较对该方法得到的数据结果进行了验证. 关键词： 回旋管 开放式谐振腔 突变结构 S参数矩阵     

T-RBAC访问控制模型及其约束描述语言

一种结合了基于任务的访问控制模型TBAC和基于角色的访问控制模型RBAC特点的新型访问控制模型-T-RBAC.该模型采用了以任务为中心的"用户-角色-任务-权限"的四级访问控制结构,较好地解决了当前工作流系统中存在的安全性问题.此外,在新模型的基础上设计了一套描述约束机制的语言ETCL,该语言在RCL2000的基础上扩充了时间特性和任务的概念,使新模型具备了较完整的约束描述能力.