聚苯并咪唑金属复合物的X-射线光电子能谱(XPS)研究

本文报道以聚苯并咪唑(PBI)与某些过渡金属卤化物所形成的金属复合物的XPS研究,由反映在金属复合物N_(1s)和C_(1s)振起(Shake-up)伴峰的消失,反映在PBI中N_(1s)双峰变为复合物中的具有高结合能的单峰以及与其复合金属离子结合能的降低,这就从施受两个侧面确证金属复合物的形成。XPS结果也说明在金属复合物的制备中,不同溶剂条件所制得的复合物在硅氢加成中活性丧失归结於溶剂导致的金属离子的还原。     

几种新型卟啉的合成及其光敏性质

合成了４种新的卟啉配体及其锌的配合物，并用红外光谱、紫外可见光谱、元素分析等手段对它们进行了表征。初步实验表明所合成的卟啉配体和金属卟啉均具有光敏性。     

A Novel Organic—Inorganic Complex：Synthesis and Crystal Structure of [Ca（DMSO）5（H2O）]2 SiMo12O40

It is becoming a focus to synthesize and assemble organic-inorganic materials, especially, to synthesize charge-transfer complexes formed by polyoxometalate and organic donors. They have attracted much attention because such complexes are active in their electric, magnetic and optic properties1-4, many investigations about them have been done and some crystal structures of them were reported5-6. But, the disadvantage of these crystals is instability at room temperature. According to the view…     

高强度高电导率聚乙炔的合成——醚类溶剂的结构对性能的影响

通过选用不同醚类结构做溶剂加热回流Ti(OBu)_4-AIEt_3催化剂,并采用非溶剂聚合方法进行乙炔聚合发现,所得HPPA膜的强度和电导率都有了较大提高。其中直链醚制得的PA膜强度(抗张强度大于100MPa)和空气稳定性比用环醚得到的PA膜高得多,但用前者时的乙炔聚合速率远低于后者。两体系得到的HPPA膜的碘掺杂电导率值相近(～10~3S/cm),拉伸后可达10~4S/cm量级。SEM、TEM及IR光谱的结果表明,不同醚制得的PA膜的纤维束直径及顺式含量有较大差别。     

不同沉淀剂制备的Ag／TS－1催化丙烯直接气相氧化合成环氧丙烷

 在423K、常压固定床石英反应器中，以丙烯直接气相氧化为探针反应，考察了催化剂制备方法、沉淀剂的种类和浓度对制备的Ag／TS－1催化剂催化性能的影响，采用TEM，XRD和UV－Vis等表征手段对Ag／TS－1催化剂进行了分析．结果表明，沉积－沉淀法是最佳的催化剂制备方法，但浸渍法也可制得具有环氧丙烷选择性的催化剂．K2CO3是一种良好的沉淀剂．以K2CO3为沉淀剂，硅钛比为64的TS－1为载体制备的Ag／TS－1催化剂上的丙烯转化率为1．72％，环氧丙烷选择性为98．2％．少量单质银的存在有利于环氧丙烷的生成，除银粒子的分散状态外，银粒子与载体TS－1间的相互作用对提高催化剂的选择性具有决定性作用．     

Preparation of Nanoelectrode Ensembles by Assembly of Nano—Silver Colloid on Gold Surface

A novel method for preparing silver nanoelectrode ensembles(SNEEs) and gold nanoelectrode ensembles (GNEEs) has been developed. Silver colloid particles were first absorbed to the gold electrode surface to form a monolayer silver colloid. N-hexadecyl nercaptan was then assembled on the electrode to form a thoil monolayer on which hydrophilic ions cannot be transfered. The SNEEs was prepared by removing thiol from silver colloid surface through applying and AC voltage with increasing frequency at 0.20V(vs.SCE). Finally,GNEEs was obtained by immersing a SNEEs into 6 mol/L HNO3 to remove the silver colloid particles. By comparison with other methods such as template method ect., this method enjoys some advantages of lower resistance, same diameter,easy preparation,controllable size and density.     

氢氧化铝镁正电溶胶制备及性能研究

氢氧化铝镁正电溶胶制备及性能研究侯万国，张春光，孙德军，梁晓丽，王果庭（山东大学胶体与界面化学研究所，济南，２５０１００）关键词混合金属氢氧化物，溶胶，超细颗粒混合金属氢氧化物的合成、组成及结构等已得到广泛研究［１，２］．我们也曾用插入法合成了混合金...     

棒状钡铁氧体的反相微乳法制备

A rodlike barium ferrite precursor with an average size of 0.72～19.6 μm and aspect ratio of 2.6～8.3 has been successfully prepared in an inverse microemulsion consisting of isooctane, cetanyl trimethyl ammonium bromide (CTAB), n-C₄H₉OH and water with ammonia and ammonium oxalate as precipitants. On sintering at 780(C, the rodlike precursor particles could be transformed into rodlike particles of barium ferrite(BaFe₁₂O₁₉) with the average size and aspect ratio of 0.69～18.2 μm and 2.3～5.8, respectively. The effect of volume ratio of aqueous phase to oleic phase, the starting concentrations of metal ions and the starting concentration ratios of metal ions to precipitants were investigated.     

N-烷基化手性氨基醇配体的合成

本实验制备了不同构型的两种N-单烷基和N-双烷基的新的手性氨醇配体。     

The Purification and Rapid Identification of Heavy Metal-binding Peptides of Water Hyacinth

This paper studies the rapid identification of heavy metal-binding peptides (phytochelatin) by taking Water Hyacinth as a model plant. Plants were cultured in water containing 2 μg/ml Cd2+ for 13 days. The Sephadex G-50 chromatography of root extract under low salt concentration (0. 01 mol/L PBS) gave a Cd-binding peak with MW of 10 ,000 determined by SEC HPLC. After oxidation with performic acid, its SEC HPLC molecular weight decreased to below 1300 and the reverse phase HPLC showed one peptide peak, whose amino acid composition is the same as that of the sample never undertaking oxidation, and (Glu/Gln):Cys:Gly=2:2:1. According to the general structure of phytochelatin (γ-Glu-Cys)n-Gly, n is 2 in this case. The protocol including the sequential steps of Sephadex G-50 chromatography→performic acid oxidation→reverse phase HPLC→amino acid analysis is a rapid and effective method to identify the existence of phytochelatin and determine its values of n.