Flash器件中氧化硅/氮化硅/氧化硅的特性

对普遍采用的氧化硅/氮化硅/氧化硅( ONO)三层复合结构介质层的制备工艺及特性进行了研究分析,研究了ONO的漏电特性以及顶氧( top oxide)和底氧( bottom oxide)的厚度对ONO层漏电的影响.结果表明,采用较薄的底氧和较厚的顶氧,既能保证较高的临界电场强度,又能获得较薄的等效氧化层厚度,提高耦合率,降低编程电压.     

数字电视用中分辨率74cm纯平彩色显像管BC配列不良的分析与对策

通过对74cm中分辨率纯平彩色显像管BC配列局部严重群散不良的调查分析,确定荫罩受力塌陷是主要原因,通过改良设计、工艺优化及其它方面的综合对策,使以上技术难题得到满意的解决,整管不良率由4.78%下降到0.172%。     

GaN-MOCVD设备反应室流场的CFD数值仿真

采用计算流体力学方法对生长半导体材料GaN的重要设备MOCVD(金属有机物化学气相沉积)反应室中的流场结构进行了三维数值仿真.数值模拟采用基于非交错网格系统的SIMPLE算法,用有限体积方法对控制方程进行离散,并采用改进的压力-速度耦合方法进行求解.数值仿真给出了具有复杂几何结构和运动方式的GaN-MOCVD反应室中的流场结构,研究了改变几何尺寸和运行参数对MOCVD反应室流场结构的影响,对正在试制开发中的MOCVD设备的几何结构的改进和运行参数的优化提出了指导性建议.     

Catalytic synthesis of single-crystalline gallium nitride nanobelts

Single-crystalline gallium nitride nanobelts have been synthesized through the reaction of gallium vapor with flowing ammonia using nickel as a catalyst. The as-synthesized products were characterized using X-ray powder diffraction (XRD), scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, and selected-area electron diffraction (SAED). XRD and SAED results revealed that the products are pure, single-crystalline GaN with hexagonal structure. The widths and thickness of the nanobelts ranged from 80 to 200 nm, and 10 to 30 nm, respectively. The lengths were up to several tens of micrometers. The nanobelts had smooth surface with no amorphous sheath, and a sharp-tip end. The growth mechanism of nanobelts was discussed.     

计费帐务系统发展趋势分析

计费帐务系统作为业务运营支撑系统的重要组成部分。其发展方向日益受到运营商的关注。通过对计量帐务系统的研究，首先介绍了传统计费模式的现状以及存在的问题，然后结合各大公司产品对计责帐务系统的关键技术进行了分析，最后提出未来计费帐务系统的特征及对其发展趋势的展望。     

Temperature effects on surface activity and application in oxidation of toluene derivatives of CTAB-SDS with KMnO4

The γ_cmc values of CTAB-SDS decrease from 63.67 mN/m at 10‡C to 36.38 mN/m at 90‡C, slightly lower than those of either CTAB or SDS. Correspondingly, the CMC of CTAB-SDS decreases almost by half. The increase of surface activity of CTAB-SDS can be attributed to the relatively weak electrostatic interaction at high temperature, which is supported by the increase of solubility of CTAB-SDS with rise in temperature. Catalytic effect on oxidation of toluene derivatives with potassium permanganate follows the order CTAB-SDS > SDS > CTAB. This is not caused by the dissociative effect of CTAB-SDS with low surface activity at low temperature, as seen from the fact that almost all oxidative products can be retrieved for different toluene derivatives and surfactants by mimicking the conditions of reaction. In the emulsifications of toluene derivatives at 90‡C, the time that turbid water layers of surfactant solutions take to become clear is the same as that of the catalytic effect on oxidation of toluene derivatives. Thus, it can be inferred that surfactants can improve the oxidation yields of toluene derivatives by increasing the contact between two reacting phases.     

An Efficient Selective Oxidation of Alcohols with Potassium Permanganate Adsorbed on Aluminum Silicate under Solvent-free Conditions and Shaking

A new procedure for the selective oxidation of alcohols to the corresponding aldehydes and ketones with potassium permanganate supported on aluminum silicate at room temperature under solvent-free conditions and shaking is reported.     

Application of an anisotropic perfectly matched layer absorber for open boundary truncation in the multiresolution time domain scheme

We apply an anisotropic perfectly matched layer (APML) absorber for open boundary truncation in implementation of the multiresolution time domain (MRTD) scheme. We develop an APML update algorithm to handle a general APML region in the MRTD formulations with the content of the leapfrog algorithm applied in the conventional finite-difference time-domain method. We also discuss the boundary truncations for both perfectly electric conductor (PEC) and perfectly magnetic conductor (PMC) walls using the image techniques. We validate the algorithm by analyzing various guided wave and antenna structures. It is found that the APML performs well for absorbing electromagnetic waves in the MRTD algorithm.     

提高托盘利用效率的重要手段——电子信息化管理

托盘能否有效运用对物流的畅通与否关系重大,这已经引起了国内外专家和学者们的重视,并就此制定了托盘电子信息化管理系统,旨在更合理地使用托盘,推进托盘一体化和共用系统的建立。而RFID技术在托盘的电子信息化管理的应用更将大大提高物流的效率与准确性,托盘电子信息化管理将成为今后托盘管理的趋势。     

基于FPGA的ASI信号接收与发送的实现

提出了一种用FPGA芯片代替Cypress公司的CY78933和CY78923芯片来实现ASI信号接收与发送的方案，详细阐述了DVB—ASI接口的硬件组成与FPGA实现，该接口符合DVB—ASI的接口规范，可实现270Mbps的信号传输，已经得到实际运用。