Reliability prediction models to support conceptual design

During the early stages of conceptual design, the ability to predict reliability is very limited. Without a prototype to test in a lab environment or without field data, component failure rates and system reliability performance are usually unknown. A popular method for early reliability prediction is to develop a computer model for the system. However, most of these models are extremely specific to an individual system or industry. This paper presents three general procedures (using both simulation and analytic solution techniques) for predicting system reliability and average mission cost. The procedures consider both known and unknown failure rates and component-level and subsystem-level analyzes. The estimates are based on the number of series subsystems and redundant (active or stand-by) components for each subsystem. The result is a set of approaches that engineers can use to predict system reliability early in the system-design process. Software was developed (and is discussed in this paper) that facilitates the application of the simulation-based techniques. For the specific type of system and mission addressed in this paper, the analytic approach is superior to the simulation-based prediction models. However, all three approaches are presented for two reasons: (1) to convey the development process involved with building these prediction tools; and (2) the simulation-based approaches are of greater value as the research is extended to consider more complex systems and scenarios     

High-Frequency Variations in the Rotation of the Earth

We report here observational results demonstrating that a three-station network of properly distributed VLBI observatories can routinely determine UT1 with a formal standard error of ±0.05 ms of time, in an observing period of 24 h. We also report the results of a three-month series of daily observing sessions of only 1-h duration with a single interferometer, which produced estimates of UT1 with standard errors of ±0.1 ms. The UT1 values obtained from the 1-h observing sessions track smoothly between the points of the 24-h time series, and the combined time series shows that it is not unusual for UT1 to vary by 1-2 ms in periods of several days. Preliminary results of reprocessing the 24-h observing sessions in 2-h segments suggest that variations of 0.4 ms may occur on time scales of only 6-8 h.     

Microprocessor-Based Control of an Ion Beam Deposition System

A microprocessor-based system with 32 A/D, 24 D/A, and 16 ac load controllers, has been designed and built to monitor and control an ion beam thin-film deposition system. The A/D and D/A channels have electrical isolation of 7.5 kV between channels and between input and output. The microprocessor system keeps the ion beam deposition parameters stable for extended periods of operation and it is proposed as a means to greatly simplify switching from one deposition species to another to grow thin multilayer or alloy films.     

The electrical resistivity of some uranium tellurides

Electrical resistivity of U₃Tein4, U₂Te₃ (cubic) and UTe₃ has been measured over temperature range 4.2–300 K. The two former compounds appear to be semimetallic conductors while the last one has semiconducting character. The results are discussed in the terms of available magnetic data.     

Rb saturation spectroscopy with an optically narrowed FM diode laser

A fast-frequency modulated (FM) diode laser has been optically narrowed using the technique of resonant optical feedback, to provide linewidths in each FM mode of ≈ 200 kHz peak-to-peak. With a drive frequency of 50 MHz and modulation index of 0.2, the FM laser has been used for the first time to obtain Doppler-free FM spectra of the Rb D₁ line at 795 nm. The potential use of this system for laser frequency stabilisation is discussed.     

Half-bridge inverter using 4H-SiC gate turn-off thyristors

This paper reports on the first demonstration of a half-bridge power inverter constructed from silicon carbide gate turn-off thyristors (GTOs) operated in the conventional GTO mode. This circuit was characterized with input bus voltages of up to 600 VDC and 2 A (peak current density of 540 A/cm²) with resistive loads using a pulse-width modulated switching frequency of 2 kHz. We discuss the implications of the thyristor's electrical characteristics and the circuit topology on the overall operation of the half-bridge circuit. This work has determined the conservative critical rate of rise value of the off-state voltage to be 200 V/μs in these devices     

Miscibility of bisphenol-A polycarbonate with poly(methyl methacrylate)

The miscibility of bisphenol-A polycarbonate (PC) with poly(methyl methacrylate) (PMMA) has been reexamined using differential scanning calorimetry (DSC) and optical indications for phase separation on heating, i.e., lower critical solution temperature (LCST) behavior. Various methods have been used to prepare the blends including methylene chloride (CH₂Cl₂) and tetrahydrofuran (THF) solution casting, melt mixing, and precipitation of PC and PMMA simultaneously from THF solution by using the nonsolvents methanol and heptane. It is shown that the resulting phase behavior for PC/PMMA blends is strongly affected by the blend preparation method. However, these blends are miscible over the whole blend composition range (unambiguous single composition-dependent T_g's and LCST behavior) when prepared by precipitation from solution using heptane as the nonsolvent. To the contrary, solution-cast and melt-mixed PC/PMMA blends were all phase separated, which may be attributed to the “solvent” effect and LCST behavior, respectively, not discovered in previous reports. Methanol precipitation does not lead to fully mixed blends, which demonstrates the importance of the choice of nonsolvent when using the precipitation method.     

Low-threshold, high-power zero-order lateral-mode DQW-SCH metal-clad ridge waveguide (AlGa)As/GaAs lasers

Metal-clad ridge waveguide (MCRW), double quantum well, separately confined heterostrucuture (DQW-SCH) lasers have been fabricated having continuous-wave (CW) threshold currents of 10?12 mA and external differential quantum efficiencies of 41?46% per uncoated facet. Light/current characteristics are linear to >70 mW, and zero-order lateral mode operation was measured at 56 mW. The CW burn-off power density is nearly double the best previously reported value.     

WWRF - the Wireless World Research Forum

Third generation mobile radio systems are currently being deployed in different regions of the world. Future systems beyond the third generation are already under discussion in international bodies and forums such as ITU, WWRF and R&D programmes of the European Union and in other regions. These systems will determine the research and standardisation activities in mobile and wireless communication in the next years. Based on experience of the third generation, future systems will be developed mainly from the user perspective with respect to potential services and applications including traffic demands. Therefore, the Wireless World Research Forum was launched in 2001 as a global and open initiative of manufacturers, network operators, SMEs, R&D centres and the academic domain. WWRF is focused on the vision of such systems - the Wireless World-and potential key technologies. This paper describes the international context of activities on systems beyond third generation, the goals, objectives and structure of WWRF, the user perspective as the starting point for a future system design and the key enabling technologies for the Wireless World.