Electrical and optical feedback in an InGaAs/InP light-amplifyingoptical switch (LAOS)

A circuit model for optical and electrical feedback has been developed to investigate the cause of negative differential resistance (NDR) switching in a series connected heterojunction phototransistor (HPT) light-emitting diode (LED) device. The model considers optical feedback from the light generated in the LED, electrical feedback from the holes thermally emitted over the LED cladding layer, nonlinear gain of the HPT, the Early effect, and leakage resistance. The analysis shows that either electrical or optical feedback can be the dominant cause for the NDR, depending upon their relative strengths. The NDR observed in the devices was caused primarily by electrical feedback since the optical feedback is weak. For low input power, avalanche breakdown appears to initiate the NDR in the devices although avalanching alone cannot cause NDR     

Atomic ion frequency standards

The history and status of trapped-ion frequency standards are reviewed. In a trapped-ion frequency standard, the frequency of an oscillator is servoed to a resonance which corresponds to a transition between two energy levels of an atomic ion. The ions are suspended in space by a combination of electric and magnetic fields. In a conventional rubidium cell, the atoms are surrounded by a buffer gas having a pressure of about 10³ Pa (approximately 10 torr). In an ion trap, the ions are held either in a vacuum or in a low-pressure buffer gas (less than 10^-3 Pa). In an atomic beam, the atoms also move through a vacuum, without collisions. However, the time available for interaction with the electromagnetic field is limited to their flight time through the apparatus, usually about 10 ms or less. Trapped ions can be observed for much longer periods. Consequently clocks based on ions trapped in electromagnetic fields portend orders-of-magnitude improvement in the development of new frequency standards. Prospects for future standards are discussed     

Low-power digital radio as a ubiquitous subscriber loop

The recent growth in the use of digital radio is reviewed. The technology used to implement low-power digital radio in the local exchange loop plant is discussed. The integration of digital radio subscriber loops withnetwork intelligence is explored. The relationship between low-power digital radio loops and broadband fiber loops is briefly examined, and standards and frequency allocation activities are summarized     

Design aspects of MOS-controlled thyristor elements: technology,simulation, and experimental results

2.5-kV thyristor devices have been fabricated with integrated MOS controlled n⁺-emitter shorts and a bipolar turn-on gate using a p-channel DMOS technology. Square-cell geometries with pitch variations ranging from 15 to 30 μm were implemented in one- and two-dimensional arrays with up to 20000 units. The impact of the cell pitch on the turn-off performance and the on-state voltage was studied for arrays with constant cathode area as well as for single-cell structures. By realizing MOS components with submicrometer channel lengths, scaled single cells are shown to turn off with current densities of several kiloamperes per square centimeter at a gate bias of 5 V. In the case of multi-cell ensembles, turn-off performance is limited due to inhomogeneous current distribution. Critical process parameters as well as the device behavior were optimized through multidimensional numerical simulation     

A cold fusion chronology

To assess the historical and sociological significance of the cold fusion saga, researchers need accurate information about the dates of various events associated with the saga. Based on materials in the Cornell Cold Fusion Archive, this article provides both a chronology and citations to documentary evidence for cold fusion events from 1926 to the end of 1990.     

Fabrication and performance of parallel-addressed InGaN micro-LED arrays

High-performance, two-dimensional arrays of parallel-addressed InGaN blue micro-light-emitting diodes (LEDs) with individual element diameters of 8, 12, and 20 /spl mu/m, respectively, and overall dimensions 490 /spl times/490 /spl mu/m, have been fabricated. In order to overcome the difficulty of interconnecting multiple device elements with sufficient step-height coverage for contact metallization, a novel scheme involving the etching of sloped-sidewalls has been developed. The devices have current-voltage (I-V) characteristics approaching those of broad-area reference LEDs fabricated from the same wafer, and give comparable (3-mW) light output in the forward direction to the reference LEDs, despite much lower active area. The external efficiencies of the micro-LED arrays improve as the dimensions of the individual elements are scaled down. This is attributed to scattering at the etched sidewalls of in-plane propagating photons into the forward direction.     

A near-optimal multiuser detector for DS-CDMA systems using semidefinite programming relaxation

A multiuser detector for direct-sequence code-division multiple-access systems based on semidefinite programming (SDP) is proposed. It is shown that maximum likelihood (ML) detection can be carried out by "relaxing" the associated integer programming problem to a dual SDP problem, which leads to a detector of polynomial complexity. Computer simulations that demonstrate that the proposed detector offers near-optimal performance with considerably reduced computational complexity compared with that of existing primal-SDP-relaxation based detectors are presented.     

OMI very fast delivery and the Sodankyla/spl uml/ Satellite Data Centre

The Ozone Monitoring Instrument (OMI) operates onboard the National Aeronautics and Space Administration's Earth Observing System Aura satellite, which was launched in July 2004. Like its sister spacecraft Terra and Aqua, Aura's capabilities include direct broadcast (DB), i.e., the ability to broadcast data at the same time as they are being measured and stored in the spacecraft's memory for later transmission to Earth. The Finnish Meteorological Institute's Satellite Data Centre at Sodankyla/spl uml/ in Finnish Lapland is exploiting this capability to receive OMI data while Aura is in sight of the receiver, which enables nearly immediate production of OMI data products for a region that includes a large part of Europe, stretching from the North Pole to the Italian Alps. The current OMI Very Fast Delivery (VFD) products include maps of surface UV-B, ozone columns, and cloud coverage.     

The Hardness of the Closest Vector Problem With Preprocessing Over$ell_infty$Norm

We show that the closest vector problem with preprocessing (CVPP) over lscr _infin norm (CVPP_infin) is NP-hard. The result is obtained by the reduction from the subset sum problem with preprocessing to CVPP_infin. The reduction also shows the NP-hardness of CVP_infin, which is much simpler than all previously known proofs. In addition, we also give a direct reduction from exact 3-sets cover problem to CVPP_infin     

Coherence-Based 3-D and Spectral Imaging and Laser-Scanning Microscopy

The basics of three-dimensional (3-D) and spectral imaging techniques that are based on the detection of coherence functions and other related techniques are reviewed. The principle of the 3-D source retrieval is based on understanding the propagation law of optical random field through the free space. The 3-D and spectral information are retrieved from the cross-spectral density function of optical random field or numerical calculation of the inverse propagation of the cross-spectral density. We will first introduce the coherence-based spectral tomography techniques with low-coherence light sources. These techniques limit their scheme of coherence detection only along the optical axis and some of them achieve simultaneously the high resolution and high speed of detection taking advantage of an imaging lens. We then provided explanations of the principle of 3-D source retrieval that is based on the propagation law of optical random field through the free space along with the introduction of the numerical holography and computed tomography techniques. We will lastly show 3-D spectral imaging schemes with the concurrent laser-scanning cross-sectioning techniques: one is the confocal laser scanning microscopy and the other is the two-photon laser-scanning fluorescence microscopy.