Formant frequency discrimination by Japanese macaques (Macaca fuscata).

These studies investigated formant frequency discrimination by Japanese macaques (Macaca fuscata) using an AX discrimination procedure and techniques of operant conditioning. Nonhuman subjects were significantly more sensitive to increments in the center frequency of either the first (F1) or second (F2) formant of single-formant complexes than to corresponding pure-tone frequency shifts. Furthermore, difference limens (DLs) for multiformant signals were not significantly different than those for single-formant stimuli. These results suggest that Japanese monkeys process formant and pure-tone frequency increments differentially and that the same mechanisms mediate formant frequency discrimination in single-formant and vowel-like complexes. The importance of two of the cues available to mediate formant frequency discrimination, changes in the phase and the amplitude spectra of the signals, was investigated by independently manipulating these two parameters. Results of the studies indicated that phase cues were not a significant feature of formant frequency discrimination by Japanese macaques. Rather, subjects attended to relative level changes in harmonics within a narrow frequency range near F1 and F2 to detect formant frequency increments. These findings are compared to human formant discrimination data and suggest that both species rely on detecting alterations in spectral shape to discriminate formant frequency shifts. Implications of the results for animal models of speech perception are discussed.     

Day-side auroral signatures based on simultaneous, coordinatedobservations at Svalbard and Greenland

The height distribution of the dayside cusp aurora and the relation between optical emissions and net downward electron energy flux are discussed. These two important characteristics of day-side cusp aurora are still unknown. It is instructive to compare particle flux and optical luminosity because these two quantities should be proportional if the cusp aurora is caused by electron impact, as has been found for nighttime aurora in the oval. Furthermore, there should then be a direct relation between auroral altitudes and particle energy. Based on coordinated auroral observations at Svalbard and Greenland, together with simultaneous, overhead F-9 satellite measurements, these quantities have been evaluated     

Frequency-specific maturation of the eighth nerve and brain-stem auditory pathway: evidence from derived auditory brain-stem responses (ABRs).

Previous studies of human auditory development using frequency-specific auditory brain-stem responses (ABRs) have reported that maturation for both peak and interpeak latencies occurs earlier for responses generated by low-frequency stimuli. In two of these studies, low-frequency ABRs presumed to originate from apical locations in the cochlea were likely dominated by activity from higher frequency regions closer to the base. In the present study, the high-pass noise-masking technique was used to generate derived ABRs that represent activity from isolated place specific regions along the basilar membrane. Analysis of auditory brain-stem maturation based on I-V interpeak latency differences with adult means revealed a frequency-specific pattern of development. Developmental changes occurred faster and mature function was attained earlier for ABRs from the mid-center-frequency (CF) derived conditions than from either the highest or lowest CF derived conditions. The differential maturation of mid-CF derived ABRs may reflect the delayed effects of the pattern of development that occurs in the cochlea.     

Studies on toxicological mechanisms of gas-phase cigarette smoke and protection effects of GTP

Gas-phase cigarette smoke (GPCS) was able to induce lipid peroxidation in lecithin liposomes, rat liver microsomes, and rat lung cells (RLC), and change the membrane fluidity of RLCs. Lipid free radicals were trapped in a GPCS-treated microsomal suspension by using 4-POBN as the spin trap. In addition, it was found that GPCS-peroxidized liposomes in appropriate degree of lipid peroxidation had the ability to increase the generation of superoxide anions in rat peritoneal neutrophils (RPN). Effects of green tea polyphenols (GTP) on the GPCS-induced damages were investigated The results showed that GTP was capable of inhibiting the GPCS-induced damages.     

Nitride-based flip-chip ITO LEDs

Nitride-based flip-chip indium-tin-oxide (ITO) light-emitting diodes (LEDs) were successfully fabricated. It was found that the forward voltage and the 20 mA output power of the flip-chip ITO LED were 3.32 V and 14.5 mW, respectively. Although the operation voltage of such a flip-chip ITO LED was slightly larger, it was found that its output power was much larger than those of conventional nonflip-chip LEDs. It was also found that flip-chip ITO LEDs were more reliable.     

Cover Picture: Toward Large‐Scale Alignment of Electrohydrodynamic Patterning of Thin Polymer Films (Adv. Funct. Mater. 15/2006)

By integrating lithography and self‐assembly via electrohydrodynamic instabilities, Russel and co‐workers are able to guide initially flat polymer films to evolve into periodic arrays of pillars over regions much greater in extent than their natural domain sizes, as detailed on p. 1992. Novel structures that involve a combination of linear ridges and pillars are also produced, mainly as as result of the dynamic merging among preformed pillars. To pattern thin polymer films via electrohydrodynamic instabilities, we design and utilize two different kinds of mask patterns to guide pillars into alignment over regions much greater in extent than their natural domain sizes. First, narrow protruding ridges that intersect to form regular patterns on the mask trigger the growth of pillars beneath. Later, square and triangular packings of pillars develop in the regions enclosed by those ridges, preserving the registry from one domain to the next over a much larger area than within individual domains in unpatterned portions of the mask. Second, small square protrusions that are prealigned into a large regular array on the mask guide the formation of square packings of pillars in domains that conform to the mask, forming a large array of pillars. Novel structures involving a combination of linear ridges and pillars are also produced mainly due to the dynamic merging among preformed pillars. Finally, we find vertex symmetry of the mask pattern is necessary for generating and preserving ordered patterns on the polymer film.     

Characterization of strongly interacted multiple cracks in an infinite plate

Based on the Kachanov method and the alternating iteration technique, a new method is proposed to deal with the problem of the strongly interacted multiple cracks in an infinite plate. Unlike the Kachanov method which neglects the interaction of the tractions of the non-uniform components, the tractions of the non-uniform components on the surfaces of cracks are considered through the alternating technique. The accuracy and efficiency of present method are validated by comparing the results of two collinear and two parallel overlapped open the cracks obtained by the present method with those of the exact solutions, the results of the Kachanov method and the alternating iteration technique. Applications of present method in solving sliding close crack problems and evaluating the plastic zones demonstrate the versatility of present method.     

Adhesion improvement of thermoplastic isotropically conductive adhesive

Generally, isotropically conductive adhesive formulations include epoxy resin as the polymeric matrix. Although epoxy has superior adhesion capability, its drawbacks include the tendency to absorb moisture and lack of reworkability (thermosetting polymer). In this study, a thermoplastic polymer with low moisture absorption (0.28 wt%), called polyarylene ether (PAE2), is used in isotropically conductive adhesive (ICA) formulation. Previous research work by Lu et al. showed that the moisture absorbed into epoxy caused galvanic corrosion, which result in the formation of metal oxide . By using a polymer with low moisture absorption, the amount of water present in ICA will be small, and the corrosion rate and formation of metal oxide can be reduced. However, previous measurements of contact resistance stability of PAE2-based ICA showed that they are not stable on all surface finishes. It was determined that for thermoplastic-based ICA, poor adhesion was the main mechanism for unstable contact resistance. Two methods of adhesion improvement will be evaluated in this work. The first is to use coupling agents and the second is to blend the thermoplastic with epoxy. Both methods showed promise in improving the contact resistance stability of polyarylene ether based ICA.