Interactions between the components in isotactic polypropylene blended with EPDM

The interaction of isotactic polypropylene with ethylene propylene diene terpolymer in their blends has been investigated by use of differential scanning calorimetry, dynamic mechanical analysis, wide- and small-angle x-ray scattering, and by investigating the nucleation and kinetics of crystallization of the iPP component under the polarization microscope. It is found, that the dispersion of the EPDM component in the iPP matrix is dependent on blend composition and is maximal at 10% EPDM content. An interface layer between the two components is formed by migration of iPP molecules into the EPDM phase. A model for this interface is proposed.     

Substrates for flexible magnetic recording media: The role of base films for modern performance requirements

The trend in magnetic recording media is towards higher frequencies and larger storage capacities. Base film technology has developed in a manner analogous to corresponding demands on particulate and thin-film media, i.e. in the direction to reduced thickness, smoother surfaces, and very high uniformity. Key elements for the success of polyester films as substrates for all kinds of flexible media are new concepts for pigmentation and surface design. Future digital video recording systems and thin-film media will require new substrates with higher mechanical strength and thermal stability. Trends in base film development including dual-surface films and alternative polymer substrates are discussed.     

Switched-current memory circuits for high-precision applications

We discuss circuit parameters that limit the precision of basic dynamic current-memory cells. In addition to analyzing current-copying errors caused by the finite output conductances of the current sources and by the clock-feedthrough (CFT) of the feedback switches, we analyze the noise performance of the basic memory cell. To reduce CFT and noise, we propose a novel circuit based on Miller capacitance-enhancement. Measurement results of memory cells integrated in a 1-μm CMOS process confirm the theoretical findings; with our CFT and noise reduction technique based on Miller enhanced capacitance and dummy switches, we achieve a dynamic range of 11 b at clock frequencies greater than 100 kHz     

An easy-to-use mismatch model for the MOS transistor

In this paper, a physics-based mismatch model is presented. It is demonstrated on a 0.18-/spl mu/m technology that a simple mismatch model can still be used to characterize deep-submicron technologies. The accuracy of the model is examined and found to be within 20% in the strong inversion region. Bulk bias dependence is modeled in a physical way. To extract the mismatch parameters, a weighted fit is introduced. It is shown that the width and length dependence of the mismatch parameters is given by the Pelgrom model.     

Cryptanalysis of Polly Cracker

An attack on the public key cryptosystem Polly Cracker is described, that reveals the complete secret key σ ∈ F_q ⁿ by means of n (nonadaptively) chosen "fake" ciphertexts     

Fabrication of 1.55 μm VCSELs on Si using metallic bonding

Using AuGeNiCr multilayered metals as the wafer bonding medium, long-wavelength GaInAsP/InP vertical cavity surface emitting lasers employing Al-oxide/Si as the upper and lower distributed Bragg reflectors were fabricated on Si substrate with the bonding interface formed outside the vertical cavity surface emitting laser cavity. Laser emission at 1.545 μm was measured under pulsed operations near room temperature. The low-temperature metallic bonding process demonstrates a great potential in device fabrication     

Retrievals of column water vapor using millimeter-wave radiometric measurements

The airborne Millimeter-wave Imaging Radiometer (MIR) measurements conducted over the Midwest region of the continental United States during January/February 1997 and over the Alaska-Arctic region during May 1998 are used to estimate column water vapor W<0.8 g/cm/sup 2/ under a clear sky. On board the same aircraft are two other instruments, the Cloud Lidar System (CLS) and MODerate-resolution Imaging Spectrometer (MODIS) Airborne Simulator (MAS), which provide cloud cover information and independent measurements of W, respectively. The MIR-estimated W values are compared and found to be in very good agreement with those measured by rawinsondes at near concurrence. A close correlation is found between the MIR-estimated W and that estimated from the MAS near-IR reflectance ratios. Water surface emissivities at several MIR frequencies are obtained in the process of the W retrieval from several flights over the Midwest lakes. These estimated emissivities compared favorably with values calculated for a calm water surface, which are based on a di-electric permittivity model and MAS-measured surface temperatures. The results from all comparisons strongly demonstrate the soundness of the technique for estimating W.     

A STRASSEN LAW OF THE ITERATED LOGARITHM FOR PROCESSES WITH INDEPENDENT INCREMENT

ＡＳＴＲＡＳＳＥＮＬＡＷＯＦＴＨＥＩＴＥＲＡＴＥＤＬＯＧＡＲＩＴＨＭＦＯＲＰＲＯＣＥＳＳＥＳＷＩＴＨＩＮＤＥＰＥＮＤＥＮＴＩＮＣＲＥＭＥＮＴＷａｎｇＪｉａｇａｎｇＡｂｓｔｒａｃｔＬｅｔＸ＝｛Ｘ（ｔ），ｔ０｝ｂｅａｐｒｏｃｅｓｗｉｔｈｉｎｄｅｐ...