Kinetics and Mechanism of Cr(VI) Reduction in a Water Cathode Induced by Atmospheric Pressure DC Discharge in Air

The process of reduction of Cr⁶⁺ ions (solution of potassium dichromate, K₂Cr₂O₇) in a water cathode was studied during a DC discharge in air. The concentration range of Cr⁶⁺ was (5.7–19) ×10^?5 mol/l and discharge current range was 20–80 mA. Cr⁶⁺ ions were shown to be reversibly reduced under a discharge action. The equilibrium degree of reduction increased with increasing initial concentration of the solution at fixed discharge current. At fixed initial concentration the reduction degree increased with increasing discharge current. The reduction degrees so obtained were 0.34–0.84. A kinetic scheme of the processes taking place in a solution was proposed. The calculated data obtained as a result of application of this scheme described well the experimental results on Cr⁶⁺ kinetics. The main processes of Cr⁶⁺ reduction and Cr³⁺ oxidation were revealed. HO ₂ ^· radicals and hydrogen peroxide were shown to be responsible for Cr⁶⁺ reduction whereas ^·OH radicals and O₂ molecules provide the reverse process of Cr³⁺ oxidation to Cr⁶⁺. The mechanism of action of phenol additives improving the process efficiency is discussed. The efficiency of phenol action as a radical scavenger was shown to be determined with its mass-transfer to the reaction area rather than chemical reaction rate.     

Stereoselective preparation of mono- and bis-derivatives of pentacyclo[6.3.0.02,6.03,10.05,9] undecane (D 3-trishomocubane)

The rearrangement of easily accessible Cookson’s diketone with chlorosulfonic acid in chloroform followed by the acidic hydrolysis gave 6-chloro-7-hydroxy-dichloropentacyclo[6.3.0.0^2,6.0^3,10.0^5,9]undecane-4-one, whose syn-stereochemistry was assigned through the X-ray crystal structure analysis. This key structure was used for the stereoselective synthesis of the D ₃-trishomocubane derivatives as well as for the preparation of potential drugs bearing hydroxy- and amino-functional groups. A new multigram preparative synthesis of D ₃-trishomocubane was developed.      

Studies on Immobilization and Partial Characterization of Lipases from Wheat Seeds (<Emphasis Type="Italic">Triticum aestivum</Emphasis>)

The objective of this study was to provide some features on immobilization and partial characterization of lipases from wheat seeds. The optimum pH and temperature were found to be 5.5 and 32–37 °C, respectively. The stability of the concentrated enzymatic extract to high temperatures (25, 35, 45, and 55 °C) showed that the incubation of the extract at 55 °C led to its complete inactivation. The concentrated enzymatic extract kept 90% of its hydrolytic and esterification activities until 70 and 40 days of storage at 4 °C, respectively. The extract presented higher hydrolytic specificity to substrates of medium and long chains and higher esterification affinity to fatty acids of short and medium chains and alcohols with two and three carbon atoms. After the immobilization process using activated coal and sodium alginate as supports, an enhancement of about threefold in lipase activity was observed. The development of the present work permitted us to point out some characteristics of lipases from wheat seeds necessary for the proposition of new future industrial applications for this important biocatalyst.     

Light-induced hetero-Diels-Alder cycloaddition: a facile and selective photoclick reaction

2-Napthoquinone-3-methides (oNQMs) generated by efficient photodehydration (Φ=0.2) of 3-(hydroxymethyl)-2-naphthol undergo facile hetero-Diels-Alder addition (k(D-A)～ 4×10(4) M(-1) s(-1)) to electron-rich polarized olefins in an aqueous solution. The resulting photostable benzo[g]chromans are produced in high to quantitative yield. The unreacted oNQM is rapidly hydrated (k(H2O) ～145 s(-1)) to regenerate the starting diol. This competition between hydration and cycloaddition makes oNQMs highly selective, since only vinyl ethers and enamines are reactive enough to form the Diels-Alder adduct in an aqueous solution; no cycloaddition was observed with other types of alkenes. To achieve photolabeling or photoligation of two substrates, one is derivatized with a vinyl ether moiety, while 3-(hydroxymethyl)-2-naphthol is attached to the other via an appropriate linker. The light-induced Diels-Alder "click" strategy permits the formation of either a permanent or hydrolytically labile linkage. Rapid kinetics of this photoclick reaction (k=4×10(4) M(-1) s(-1)) is useful for time-resolved applications. The short lifetime (τ ～7 ms in H(2)O) of the active form of the photoclick reagent prevents its migration from the site of irradiation, thus, allowing for spatial control of the ligation or labeling.     

Effects of finite size nuclei in relativistic four-component calculations of hyperfine structure

The effect of a finite size model for both the nuclear charge and magnetic moment distributions on calculated EPR hyperfine structure have been studied using a relativistic four-component method based on density functional theory. This approach employs a restricted kinetically balanced basis (mDKS-RKB) and includes spin-polarization using noncollinear spin-density exchange-correlation functionals in the unrestricted fashion. Benchmark calculations have been carried out for a number of small molecules containing Zn, Cd, Ag, and Hg. The present results are compared with those obtained at the Douglas-Kroll-Hess second order (DKH-2) method. The dependence of the results on the quality of the orbital and auxiliary basis sets has been studied. It was found that some basis sets contain irregularities that deteriorate the results. Especial care has to be taken also on the construction of the auxiliary basis for fitting the total electron and spin-densities.     

From tetragermacyclobutene to tetragermacyclobutadiene dianion to tetragermacyclobutadiene transition metal complexes

The reaction of 3,4-dichlorotetragermetene derivative 2 with Na(2)[Fe(CO)(4)] in THF produced a (tetragermacyclobutadiene)tricarbonyliron complex, [{η(4)-((t)Bu(2)MeSi)(4)Ge(4)}]Fe(CO)(3)4, which has a slightly folded Ge(4) ring perhaptocoordinated to the Fe center. Structural and spectral characteristics of 4 show a remarkable π-donating ability of the tetragermacyclobutadiene ligand toward the transition metal, surpassing that of tetrasilacyclobutadiene and cyclobutadiene ligands. Reduction of 2 with KC(8) resulted in exclusive formation of the dipotassium salt of the tetragermacyclobutadiene dianion derivative 3(2-)·[K(+)(thf)(2)](2), representing a rare example of a 6π-electron compound that, on the basis of its structural and magnetic properties, was recognized as a nonaromatic species. Reaction of 3(2-)·[K(+)(thf)(2)](2) with CpCoI(2)(PPh(3)) produced a (cyclopentadienyl)(tetragermacyclobutadiene)cobalt complex, [{η(4)-((t)Bu(2)MeSi)(4)Ge(4)}]CoCp 7, as the first example of a sandwich compound featuring an all-germanium-containing cyclic polyene ligand.     

Natural underwater adhesives

The general topic of this review is protein‐based underwater adhesives produced by aquatic organisms. The focus is on mechanisms of interfacial adhesion to native surfaces and controlled underwater solidification of natural water‐borne adhesives. Four genera that exemplify the broad range of function, general mechanistic features, and unique adaptations are discussed in detail: blue mussels, acorn barnacles, sandcastle worms, and freshwater caddisfly larva. Aquatic surfaces in nature are charged and in equilibrium with their environment, populated by an electrical double layer of ions as well as adsorbed natural polyelectrolytes and microbial biofilms. Surface adsorption of underwater bioadhesives likely occurs by exchange of surface bound ligands by amino acid sidechains, driven primarily by relative affinities and effective concentrations of polymeric functional groups. Most aquatic organisms exploit modified amino acid sidechains, in particular phosphorylated serines and hydroxylated tyrosines (dopa), with high‐surface affinity that form coordinative surface complexes. After delivery to the surfaces as a fluid, permanent natural adhesives solidify to bear sustained loads. Mussel plaques are assembled in a manner superficially reminiscent of in vitro layer‐by‐layer strategies, with sequentially delivered layers associated through Fe(dopa)₃ coordination bonds. The adhesives of sandcastle worms, caddisfly larva, and barnacles may be delivered in a form somewhat similar to in vitro complex coacervation. Marine adhesives are secreted, or excreted, into seawater that has a significantly higher pH and ionic strength than the internal environment. Empirical evidence suggests these environment triggers could provide minimalistic, fail‐safe timing mechanisms to prevent premature solidification (insolubilization) of the glue within the secretory system, yet allow rapid solidification after secretion. Underwater bioadhesives are further strengthened by secondary covalent curing. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Raman Analysis of Polymerization of APST Molecule

In this work we investigated the solidification of aminopropylsilanetriol dissolved in water (∼25%) under different conditions by Raman spectroscopy. The solidification was carried out at three different temperatures 8 °C, 23 °C and 60 °C. The influence of electromagnetic radiation on the polymerization process was also studied. Samples were held to solidify in dark and at UV (254 nm and 356nm) spectral range. In order to investigate the influence of the substrate on the resulting polymer structure, teflon, PVC, glass, brass and silica were used. Best ordered polymerized structure was achieved for samples deposited on plastics and solidified in dark, at room temperature.     

Radiation-induced polymerization of cyclohexene sulfide in the solid state

Radiation-induced solid-state polymerization of cyclohexene sulfide has been investigated. Differential thermal analysis shows that this compound has a phase transition point at ?74°C and behaves as a plastic crystal in the temperature range from ?74 to ?20°C (melting point). By rapid cooling, this plastic crystal was easily supercooled, and below ?166°C a glassy crystal, i.e., a supercooled nonequilibrium state of plastic crystal, was obtained. In-source polymerization proceeded in the plastic crystalline state. Postpolymerization of glassy crystalline monomer irradiated at ?196°C occurred above ?166°C (glass transition point) during subsequent heating.