Liquid chromatography-particle beam electron ionization mass spectrometry method for analysis of botanical extracts: evaluation of ephedrine alkaloids in standard reference materials

The preliminary validation of a high-performance liquid chromatography particle beam mass spectrometry method (HPLC-PB/MS) with electron impact ionization source for analysis of botanical extracts is presented. The LC-PB/MS system was evaluated for the analysis of ephedrine alkaloids using ephedra-containing National Institute of Standards and Technology dietary supplement standard reference materials (SRMs) 3241 Ephedra Sinica Stapf Native Extract and 3242 Ephedra Sinica Stapf Commercial Extract. The ephedrine alkaloids were separated by reversed-phase chromatography using a phenyl column at room temperature. A linear gradient method with a mobile phase composition varying from 5:95 [MeOH:0.1% trifluoroacetic acid (TFA) in water] to 20:80 (MeOH:0.1% TFA in water) at a flow rate of 1.0 ml/min, with an analysis time of less than 20 min, was used. The source block temperature was evaluated to determine the optimal operating conditions by monitoring the intensities and fragmentation patterns of the ephedrine alkaloids. Ephedrine and N-methylephedrine were taken as a representative of the test alkaloids. The LODs on the sub-nanogram level were achieved, with ephedrine, pseudoephedrine, and methylephedrine in the SRMs quantified by a standard addition method with recoveries of > or = 86% and RSDs of < or = 14% (n = 3).     

Inclusion of Carboxyl Function Inside of Cucurbiturils and its Use in Molecular Switches

We have prepared organic guest molecules in which two pyridinium rings are connected through an aromatic/aliphatic bridge bearing a carboxyl group. The supramolecular interactions between these guests and macrocyclic hosts cucurbit[7]uril ( CB7 ) and cucurbit[8]uril ( CB8 ) has been studied. We have demonstrated that the binding modes of the complexes depend on the type of central bridge present in the guest molecules and the size of the macrocycle. We have also showed that the binding mode between cucurbiturils and guests with aromatic bridges is pH independent. On the other hand, a guest containing an aliphatic bridge and CB7 formed a pseudorotaxane, which behaved as a pH‐driven molecular switch.     

Interaction of methoxy- and methylenedioxyamphetamines with carbon and polymeric adsorbents in polar liquids

Solid phase extraction (SPE) of methoxy- and methylenedioxyamphetamines from diluted aqueous solutions was investigated on carbon and polymeric adsorbents of different textures and chemical compositions. Those adsorbents were applied cartridges packed with three chemically modified carbons prepared from plum stones (initial A2PS, oxidized A2PS-O, and reduced A2PS-H) and commercially available adsorbents (polymeric LiChrolut EN, graphitized Hypercarb and Carboprep). Several factors influence the recovery rates of amphetamine derivatives such as the polarity of adsorbates (free energy of salvation), the specific surface area and surface composition of adsorbents, and the solvent characteristics. Different combinations of these factors affect the recovery rate (R1) for high- and low-surface area adsorbents. The minimal R1 values are observed for an amphetamine derivative at a maximal solvation effect and for a set of amphetamines adsorbed on graphitized carbons.      

Separation and quantification of double‐ and triple‐layered rotavirus‐like particles by CZE

Virus‐like particles have been successfully used as safe vaccines, as their structure is identical to their native counterparts but devoid of the viral genetic material. However, production of these complex structures is not easy, as recombinant proteins must assemble into virus‐like particles. Techniques to differentiate assembled and soluble proteins, as well as assembly intermediaries often present in a sample, are required. An example of complex virus‐like particles mixture occurs when rotavirus proteins are recombinantly expressed. Rotavirus‐like particles (RLP) can be single (sl), double (dl), or triple layered (tl). The use of RLP preparations as vaccines requires their complete characterization, including separation and quantification of each RLP in a sample. In this work, CZE was evaluated for the separation and quantification of dl and triple‐layered rotavirus‐like particles (tlRLP). A fused‐silica capillary with a deoxycholate running buffer efficiently separated dl and tlRLP in RLP preparations, as they migrated in two discrete peaks with electrophoretic mobilities of 1.24±0.04 and 2.95±0.03 Ti, respectively. Standard curves for dl and tlRLP were generated, and the response was linearly proportional to analyte concentration. The methodology developed was quantitative, specific, accurate, precise, and reproducible. CZE allowed the quantitative characterization of RLP preparations, which is required for evaluation of immunogens, for process development, and for quality control protocols.     

Layer‐by‐Layer All‐Inorganic Quantum‐Dot‐Based LEDs: A Simple Procedure with Robust Performance

A novel all‐inorganic electroluminescent device is demonstrated based on highly luminescent CdTe nanocrystals intercalated within a laminar hydrotalcite‐like structure. The laminar scaffold acts to both support and distribute the CdTe nanocrystals. The device is synthesized using simple wet chemical processes at room temperature in ambient conditions. It has high thermal stability, operating continuously up to 90 °C, and a maximum efficiency at J = 0.12 A cm^?2. The device is targeted at the automotive industry.     

0.8 μW 12-bit SAR ADC sensors interface for RFID applications

The design and first measuring results of an ultra-low power 12 bit successive-approximation ADC for autonomous multi-sensor systems are presented. The comparator and the DAC are optmised for low power consumption. The power consumption is 0.52 μW from a 1.2 V supply with a sample clock of 3.125 kHz and 0.85 μW at 6.25 kHz. This gives 136 pJ per conversion or 66 fJ per conversion step. As per authors’ knowledge, 66 fJ per conversion step is the best reported so far.The ADC was realised in the NXP CMOS 0.14 μm technology; the area was 0.35 mm². Only four metal layers were used in order to allow 3D integration of the sensors.     

Structural Evolution Following Spinodal Decomposition of the Pseudoternary Compound (Pb0.3Sn0.1Ge0.6)Te

Pseudoternary (Ge,Sn,Pb)Te compounds display favorable thermoelectric properties. Spinodal decomposition in the quasiternary (Ge,Sn,Pb)Te system is at the origin of a wide solubility gap at low Sn concentrations. The structural evolution of the spinodal decomposition was investigated as a function of aging time at 500°C, using x-ray diffraction, electron microscopy, and scanning electron microscopy. The evolution of the structure at 500°C consists initially of a short diffusion-controlled demixing stage into Pb- and Ge-rich coherent areas, with compositions corresponding to the inflection points of the free-energy curve. The Pb-rich areas adopt configurations associated with the directions of the soft elastic moduli of the cubic compound. Both the Pb- and Ge-rich areas are supersaturated and undergo in a second stage a nucleation and growth process and give rise to a biphased structure with equilibrium compositions corresponding to the boundaries of the miscibility gap. The resulting Pb-rich areas display a relatively stable microstructure suggesting the presence of long-range interactions between the Pb-rich precipitates in the Ge-rich matrix.     

Modeling of Dynamic Effects in a Laser-Driven Semiconductor Switch of High-Power Microwaves

Problems of high-power microwaves penetrating into and reflecting from a semiconductor (silicon) plate with non-stationary processes are investigated. The plate is the basis of switches activated by laser-driven photoconductivity which changes its properties when heated by the switched microwave power. Analytical criteria for the stationary solutions of the activated (quasi-metallic) and deactivated (dielectric) states of the switch under the conditions of high-power microwave heating and external cooling are found. Results of numerical simulations are also given for the problems of the switch activation by microwave heating initiated by pulsed laser radiation, which increases the carrier density rapidly. Numerical simulations are carried out using the finite-difference time-domain method with the unsplit perfectly matched layer absorbing boundary conditions. We demonstrate various types of solutions depending on the basic parameters of the problems - microwave field intensity, laser pulse energy and semiconductor doping.