Homologation and alkylation of boronic esters and boranes by 1,2‐metallate rearrangement of boron ate complexes

Organoboranes and boronic esters readily undergo nucleophilic addition, and if the nucleophile also bears an α‐leaving group, 1,2‐metallate rearrangement of the ate complex results. Through such a process a carbon chain can be extended, usually with high stereocontrol and this is the focus of this review. A chiral boronic ester (substrate control) can be used for stereocontrolled homologations with (dichloromethyl)lithium in the presence of ZnCl₂. Subsequent alkylation by an organometallic reagent also occurs with high levels of stereocontrol. Chiral lithiated carbanions (reagent control) can also be used for the reaction sequence with achiral boronic esters and boranes. Aryl‐stabilized sulfur ylide derived chiral carbanions can be homologated with a range of boranes including vinyl boranes in good yield and high diastereo‐ and enantioselectivity. Lithiated alkyl chlorides react with boronic esters, again with high stereocontrol, but both sets of reactions are limited in scope. Chiral lithiated carbamates show the greatest substrate scope and react with both boronic esters and boranes with excellent enantioselectivity. Furthermore, iterative homologation with chiral lithiated carbamates allows carbon chains to be “grown” with control over relative and absolute stereochemistry. The factors responsible for stereocontrol are discussed. © 2009 The Japan Chemical Journal Forum and Wiley Periodicals, Inc. Chem Rec 9: 24–39; 2009: Published online in Wiley InterScience ( www.interscience.wiley.com ) DOI 10.1002/tcr.20168     

Ab initio dynamics of cellulose pyrolysis: nascent decomposition pathways at 327 and 600 °c

We modeled nascent decomposition processes in cellulose pyrolysis at 327 and 600 °C using Car-Parrinello molecular dynamics (CPMD) simulations with rare events accelerated with the metadynamics method. We used a simulation cell comprised of two unit cells of cellulose Iβ periodically repeated in three dimensions to mimic the solid cellulose. To obtain initial conditions at reasonable densities, we extracted coordinates from larger classical NPT simulations at the target temperatures. CPMD-metadynamics implemented with various sets of collective variables, such as coordination numbers of the glycosidic oxygen, yielded a variety of chemical reactions such as depolymerization, fragmentation, ring opening, and ring contraction. These reactions yielded precursors to levoglucosan (LGA)-the major product of pyrolysis-and also to minor products such as 5-hydroxy-methylfurfural (HMF) and formic acid. At 327 °C, we found that depolymerization via ring contraction of the glucopyranose ring to the glucofuranose ring occurs with the lowest free-energy barrier (20 kcal/mol). We suggest that this process is key for formation of liquid intermediate cellulose, observed experimentally above 260 °C. At 600 °C, we found that a precursor to LGA (pre-LGA) forms with a free-energy barrier of 36 kcal/mol via an intermediate/transition state stabilized by anchimeric assistance and hydrogen bonding. Conformational freedom provided by expansion of the cellulose matrix at 600 °C was found to be crucial for formation of pre-LGA. We performed several comparison calculations to gauge the accuracy of CPMD-metadynamics barriers with respect to basis set and level of theory. We found that free-energy barriers at 600 °C are in the order pre-LGA < pre-HMF < formic acid, explaining why LGA is the kinetically favored product of fast cellulose pyrolysis.     

A 1 GS/s, 31 MHz BW, 76.3 dB dynamic range, 34 mW CT-\Updelta\Upsigma ADC with 1.5 cycle quantizer delay and improved STF

A 1 GS/s continuous-time delta-sigma modulator (CT- $\Updelta\Upsigma$ M) with 31 MHz bandwidth, 76.3 dB dynamic range and 72.5 dB peak-SNDR is reported in a 0.13 μm CMOS technology. The design employs an excess loop delay (ELD) of more than one clock cycle for achieving higher sampling rate. The ELD is compensated using a fast-loop formed around the last integrator by using a sample-and-hold. Further, the effect of this ELD compensation scheme on the signal transfer function (STF) of a feedforward CT- $\Updelta\Upsigma$ architecture has been analyzed and reported. In this work, an improved STF is achieved by using a combination of feed-forward, feed-back and feed-in paths and power consumption is reduced by eliminating the adder opamp. This CT- $\Updelta\Upsigma$ M has a conversion bandwidth of 31 MHz and consumes 34 mW from the 1.2 V power supply. The relevant design trade-offs have been investigated and presented along with simulation results.     

Network Health Monitoring of WSNs Using Node Loss Rate Calculations

Wireless Personal Communications - The inherent stringent energy and bandwidth constraints complicate the ascertainment of the reasons for the failure in wireless sensor networks (WSNs). This work...     

Stretch-induced wrinkling of polyethylene thin sheets: Experiments and modeling

This paper presents a study on stretch-induced wrinkling of thin polyethylene sheets when subjected to uniaxial stretch with two clamped ends. Three-dimensional digital image correlation was used to measure the wrinkling deformation. It was observed that the wrinkle amplitude increased as the nominal strain increased up to around 10%, but then decreased at larger strain levels. This behavior is consistent with results of finite element simulations for a hyperelastic thin sheet reported previously (Nayyar et al., 2011). However, wrinkles in the polyethylene sheet were not fully flattened out at large strains (>30%) as predicted for the hyperelastic sheet, but exhibited a residual wrinkle whose amplitude depended on the loading rate. This is attributed to the viscoelastic response of the material. Two different viscoelastic models were adopted in finite element simulations to study the effects of viscoelasticity on wrinkling and to improve the agreement with the experiments, including residual wrinkles and rate dependence. It is found that a parallel network model of nonlinear viscoelasticity is suitable for simulating the constitutive behavior and stretch-induced wrinkling of the polyethylene sheets.     

Chemical composition and larvicidal activity of Zanthoxylum armatum against diamondback moth,Plutella xylostella

The diamondback moth, Plutella xylostella (L.) (Lepidoptera: Yponomeutidae) is the most serious pest of cruciferous crops grown in the world causing economic yield loss. Several synthetic insecticides have been used against P. xylostella but satisfactory control was not achieved due to development of resistance to insecticides. Therefore, the present study was carried out to screen different fractions of Zanthoxylum armatum for their insecticidal activities against second instar larvae of P. xylostella. Results indicate, all the fractions showed activity to P. xylostella. However, n-hexane fraction of Z. armatum showed maximum larvicidal activity with minimum LC₅₀ value of 2988.6 ppm followed by ethanol (LC₅₀ = 12779.7 ppm) and methanol fraction (LC₅₀ = 12908.8 ppm) whereas chloroform fraction was least toxic (LC₅₀ = 16750.6 ppm). The GC–MS analysis of n-hexane fraction of leaf extract showed maximum larvicidal activity, which may be due to two major compounds i.e. 2-undecanone (19.75%) and 2-tridecanone (11.76%).     

Zeta potential and electroosmotic mobility in microfluidic devices fabricated from hydrophobic polymers: 1. The origins of charge

This paper combines new experimental data for electrokinetic characterization of hydrophobic polymers with a detailed discussion of the putative origins of charge at water-hydrophobe interfaces. Complexities in determining the origin of charge are discussed in the context of design and modeling challenges for electrokinetic actuation in hydrophobic microfluidic devices with aqueous working fluids. Measurements of interfacial charge are complicated by slip and interfacial water structuring phenomena (see Part 2, this issue). Despite these complexities, it is shown that (i) several hydrophobic materials, such as Teflon and Zeonor, have predictable electrokinetic properties and (ii) electrokinetic data for hydrophobic microfluidic systems is most consistent with the postulate that hydroxyl ion adsorption is the origin of charge.     

Probing occurrence of phenylpropanoids in Morinda citrifolia in relation to foliar diseases

Accumulation of phenolic compounds in cell walls of different plant organs leading to increased lignification is an early defence response of plants against biotic stress. The aim of this work was to delineate occurrence of cell wall-bound (CWB) phenolic compounds in Morinda citrifolia leaves. Alkaline hydrolysis of the cell wall material of leaf tissues yielded 4-coumaric acid (4-CA) as the major bulk of the phenolic compounds in all Morinda germplasms. Next in line was 4-hydroxybenzoic acid. Other phenolics identified were vanillic acid, 4-hydroxybenzaldehyde, vanillin and ferulic acid. Concentrations of all the CWB phenolics were highest in the germplasm CHN-5, followed by the germplasm CHN-1. Incidentally, these two Morinda germplasms recorded lowest incidence of foliar diseases. Significantly higher amounts of 4-CA in combination with other phenolics may be the reasons for lowest incidence of foliar diseases in CHN-5 and CHN-1 germplasms of M. citrifolia.     

Oxadiazole: Synthesis,characterization and biological activities

The synthesis of novel achiral and chiral amides incorporating 1,3,4-oxadiazole ring are reported. All the synthesized amides are characterized ¹H, ¹³C, FTIR and elemental analysis techniques. Synthesized compounds are screened for microbial and cytotoxic activities.     

Stable physically adsorbed coating of poly-vinyl alcohol for the separation of basic proteins

In aqueous capillary electrophoresis, the electroosmotic flow can be strongly suppressed by coating the inner surface of the capillary. In the present work hydrophilic coating of 4% polyvinyl alcohol (PVA) has been used for the analysis of basic proteins. The coating is simple and easy to obtain. The separation of ribonuclease and α-chymotrypsin has been uniquely done with other three basic proteins (lysozyme, cytochrome-c and trypsin) using a buffer 11.60 mM sodium acetate and 18.40 mM acetic acid at pH 4.5 in addition to positive power supply of 20 kV at 25°C. Detection was performed using UV detector at 230 nm. The proposed PVA coated capillary provides reproducible separation of five basic proteins within 10 min with RSD values for mobility bellow 1.4% (n = 6) for all the five basic proteins. The stability of coated capillary has been checked up to 40 runs. The viscosity measurement for 4% PVA have been studied and scanning electron microscope (SEM) images obtained to make it compatible with future micro-chip applications.