A comparative study of ruthenium(III) catalysed oxidation of L-leucine and L-isoleucine by alkaline permanganate. A kinetic and mechanistic approach

The kinetics of the Ru^III-catalysed oxidation of L-leucine and L-isoleucine by alkaline permanganate were studied and compared, spectrophotometrically using a rapid kinetic accessory. The reaction is first order with respect to [oxidant] and [catalyst] with an apparently less than unit order in [substrate] and [alkali] respectively. The results suggest the formation of a complex between the amino acid and the hydroxylated species of ruthenium(III). The complex reacts further with the alkaline permanganate species in a rate-determining step, resulting in the formation of a free radical, which again reacts with the alkaline permanganate species in a subsequent fast step to yield the products. The reaction constants involved in the mechanism were calculated. There is a good agreement between observed and calculated rate constants under different experimental conditions. The activation parameters with respect to the slow step of the mechanism for both the amino acids were calculated and discussed. Of the two amino acids, leucine is oxidised at a faster rate than isoleucine.     

Binding studies of sodium dodecyl benzene sulphonate with poly(N-vinyl-2-pyrrolidone)

The binding of sodium dodecyl benzene sulphonate (SDBS) with poly(N-vinyl-2-pyrrolidone) (PVP) has been investigated at 303.15 and 313.15 K using equilibrium dialysis, surface tension, viscosity, ultrasound velocity and ultrasound absorption techniques. From each of these studies four distinct regions of SDBS-PVP interactions were observed. Interaction of SDBS with PVP was found to involve the binding of surfactant dimers with the polymer molecule followed by usual micellization. The binding data has been analyzed in terms of various models of polymer-surfactant interaction.     

Heterocyclic inflammation inhibitors

Non steroidal anti-inflammatory drugs are the most widely used medicines for relief of pain. These drugs have some side effects, particularly toxicity in the gastrointestinal tract and kidneys. Various approaches have been used for obtaining safer anti-inflammatory drugs. In this review we have summarized the recent developments in the following areas; (i) mode of action of NSAIDs (ii) Role of COX-1 & COX-2 in inflammation, (iii) Different approaches used to improve gastric tolerance i.e. chemical manipulation, formulation & co-administration, development of non specific (COX-1 & COX-2 inhibitors) and specific (COX-2 inhibitors) inflammation inhibitors, and development of inflammation inhibitors having a mode of action other than COX-1 & COX-2 inhibition. We have also focused on the safety of COX-2 inhibitors and the synthesis of heterocyclic compounds and their role as inflammation inhibitors.     

A diruthenium-substituted polyoxometalate as an electrocatalyst for oxygen generation

Transition metal heteropolyanions have been used to catalyze a variety of organic oxidations but have not previously been used for O2 generation, despite sharing some structural similarities with dioxoruthenium water-oxidation catalysts. In this study, we report that the di-Ru-substituted polyoxometalate (POM) [Ru2Zn2(H2O)2(ZnW9O34)2]14- can be used to catalyze the electrochemical generation of O2. By comparing the behavior of this compound to that observed using a mono-Ru-substituted POM catalyst, we show that adjacent Ru sites are necessary to observe O2 generation. These observations suggest a reaction pathway involving two Ru-bound oxygen species combining to form O2 and are consistent with the accepted mechanism of electrochemical oxygen evolution. Finally, analysis of the observed electrode kinetics yields a Tafel slope of roughly 120 mV, which is similar to values reported previously for perovskite anodes.     

Simulation of the Adhesion of Particles to Surfaces

The removal of micrometer and submicrometer particles from dielectric and metal films represents a challenge in postchemical mechanical polishing cleaning. Proper modeling of the adhesive force between contaminant particles and these films is needed to develop optimal solutions to postchemical mechanical polishing cleaning. We have previously developed and experimentally validated a model to describe the adhesion between spherical particles and thin films. This simulation expands previous models to characterize the adhesive interaction between asymmetrical particles, characteristic of a polishing slurry, and various films. Our simulation accounts for the contact area between particles and substrates, as well as the morphology of the surfaces. Previous models fail to accurately describe the contact of asymmetrical particles interacting with surfaces. By properly accounting for nonideal and geometry and morphology, the simulation predicts a more accurate adhesive force than predictions based upon an ideal van der Waals model. The simulation is compared to experimental data taken for both semi-ideal particle-substrate systems (polystyrene latex spheres in contact with silicon films) and asymmetrical systems (alumina particles in contact with various films). Copyright 2001 Academic Press.     

Polarographic separation of cobalt from nickel

Summary The polarographic behaviour of nickel and cobalt in the mixed base electrolytes, urea-pyridine and urea-hydrazine has been studied. The effect of p_H, concentration of supporting electrolyte and the presence of various other ions was investigated. Well defined polarograms for both the elements were obtained at p_H 6.0 and 5.0 respectively. Attempts were made to utilize these observations in the separation of the two cations. While the difference in E _1/2 of the ions in urea-pyridine was greater than –0.3 volts that in urea-hydrazine was about –0.2 volts or slightly less even under the optimum conditions. In a mixed solution the waves for Co and Ni were therefore well developed and separated in the former base electrolyte. The polarograms in urea-hydrazine were, however, of little analytical use because of the washing away of the Ni wave due to the presence of even small amounts of cobalt.

---

Zusammenfassung Das polarographische Verhalten von Nickel und Kobalt in Harnstoff-Pyridin- und Harnstoff-Hydrazinlösung wurde untersucht und der Einfluß des p_H-Wertes, der Leitsalzkonzentration sowie der Gegenwart verschiedener anderer Ionen festgestellt. Bei p_H 6,0 bzw. 5,0 wurden für beide Elemente gut ausgebildete Polarogramme erhalten. Es wurde versucht, die erhaltenen Ergebnisse zur Trennung der beiden Ionen zu benutzen. In Harnstoff-Pyridinlösung beträgt der Unterschied der beiden Halbstufenpotentiale mehr als –0,3 V und man erhält gut ausgebildete und voneinander getrennte Stufen. In Harnstoff-Hydrazinlösung dagegen beträgt der Unterschied nur –0,2 V oder etwas weniger, selbst unter optimaler Bedingungen, und die Ni-Stufe wird schon durch kleine Kobaltmengen beeinträchtigt.

     

Design and Development of Zeolite-Based Catalytic Processes for Aromatics Production

Processes for the production of xylenes, which occur in an integrated aromatic complex, are discussed. A brief overview of the work carried out at Indian Petrochemicals Corporation Limited for the development of zeolite-based catalytic processes for the production of aromatics is presented. This includes xylene isomerization, transalkylation and disproportionation of C₇ and C₉ aromatics for maximization of xylenes, selective disproportionation of toluene and selective alkylation of mono-alkylaromatics to p-dialkylbenzene. Achievements in the commercialization of zeolite-based catalysts and processes for isomerization of m-xylene to p- and o-xylene along with dealkylation of ethylbenzene, and for selective ethylation of ethylbenzene to produce p-diethylbenzene are highlighted.     

Structural characterization of a lanthanum bistriflimide complex, La(N(SO2CF3)2)3(H2O)3, and an investigation of La, Sm, and Eu electrochemistry in a room-temperature ionic liquid, [Me3N(n)Bu][N(SO2CF3)2

The reduction of selected lanthanide cations to the zerovalent state in the room-temperature ionic liquid [Me3N(n)Bu][TFSI] is reported (where TFSI = bistriflimide, [N(SO2CF3)2]-). The lanthanide cations were introduced to the melt as the TFSI hydrate complexes [Ln(TFSI)3(H2O)3] (where Ln = La(III), Sm(III) or Eu(III)). The lanthanum compound [La(TFSI)3(H2O)3] has been crystallographically characterized, revealing the first structurally characterized f-element TFSI complex. The lanthanide in all three complexes was shown to be reducible to the metallic state in [Me3N(n)Bu][TFSI]. For both the Eu and Sm complexes, reduction to the metallic state was achieved via divalent species, and there was an additional observation of the electrodeposition of Eu metal.     

Recovery of americium from nitric acid solutions containing calcium by different co-precipitation methods

Recovery of americium from nitric acid solutions was studied by co-precipitation as hydroxide with various ions like calcium, ferric, nickel using sodium hydroxide and ammonium hydroxide. Studies were also carried out to recover americium using lanthanum fluoride and bismuth phosphate co-precipitation. All the methods are able to co-precipitate Am quantitatively. However, co-precipitation of Am with optimum concentration iron using ammonia is found to be better from nitric acid solutions containing large concentrations of calcium ions. Approximately 2 g of Am was recovered from 150 litres of solution batch wise using iron.