Biomimetic Bottlebrush Polymer Coatings for Fabrication of Ultralow Fouling Surfaces

Demand for long‐lasting antifouling surfaces has steered the development of accessible, novel, biocompatible and environmentally friendly materials. Inspired by lubricin (LUB), a component of mammalian synovial fluid with excellent antifouling properties, three block polymers offering stability, efficacy, and ease of use were designed. The bottlebrush‐structured polymers adsorbed strongly on silica surfaces in less than 10 minutes by a simple drop casting or online exposure method and were extremely stable in high‐salinity solutions and across a wide pH range. Antifouling properties against proteins and bacteria were evaluated with different techniques and ultralow fouling properties demonstrated. With serum albumin and lysozyme adsorption <0.2 ng cm^?2, the polymers were 50 and 25 times more effective than LUB and known ultralow fouling coatings. The antifouling properties were also tested under MPa compression pressures by direct force measurements using surface forces apparatus. The findings suggest that these polymers are among the most robust and efficient antifouling agents currently known.     

Microextraction of phenolic compounds using a fiber coated with a polyaniline-montmorillonite nanocomposite

Microchimica Acta - A highly porous fiber coated polyaniline/montmorillonite clay was prepared for solid-phase microextraction. The nanocomposite was synthesized by in-situ polymerization. The...     

Timeout Period Analysis to Detect Black Hole Attack in Multihop Wireless Ad Hoc Networks

A novel approach is proposed to estimate the timeout period used in wireless ad hoc networks in order to detect misbehaving nodes that make black hole attacks. Timeout period is an acceptable time frame for a node to forward a packet and is used to judge if the node is behaving properly. To avoid misjudgment and false alarms, the accuracy of the estimate of the timeout period is very important. Our method is based on the IEEE 802.11 MAC protocol and Dynamic Source Routing protocol. The main contribution of this paper is proposing a queuing analysis to calculate the mean and maximum delay per hop implementing the 95-percentile of medium access waiting time. In addition, a new technique is introduced that can be applied to determine the mean number of hops in flooding-based ad hoc networks, taking into account edge effects. For each proposed model, analytical results are compared with results obtained from simulations and the validity of the models is confirmed by observing the close relationship between the results.     

A ternary hybrid system based on combination of mesoporous silica,heteropolyacid and double-layered clay: an efficient catalyst for the synthesis of 2,4-dihydro-3H-pyrazol-3-ones and pyranopyrazoles in aqueous medium: studying the effect of the synthetic procedure on the catalytic activity

Research on Chemical Intermediates - SBA/hydrotalcite/heteropolyacid nanocomposite is synthesized via a novel procedure in which the as-prepared heteropolyacid-loaded SBA-15 was impregnated with...     

A new design of optical add/drop filters and multi-channel filters based on hexagonal PhCRR for WDM systems

Photonic Network Communications - In this research, using photonic crystal dielectric rods with a triangular lattice constant, a photonic crystal ring resonator (PhCRR) has been designed in order...     

Energy‐efficient void avoidance geographic routing protocol for underwater sensor networks

Underwater wireless sensor networks (UWSNs) consist of a group of sensors that send the information to the sonobuoys at the surface level. Void area, however, is one of the challenges faced by UWSNs. When a sensor falls in a void area of communication, it causes problems such as high latency, power consumption, or packet loss. In this paper, an energy‐efficient void avoidance geographic routing protocol (EVAGR) has been proposed to handle the void area with low amount of energy consumption. In this protocol, a suitable set of forwarding nodes is selected using a weight function, and the data packets are forwarded to the nodes inside the set. The weight function includes the consumed energy and the depth of the candidate neighboring nodes, and candidate neighboring node selection is based on the packet advancement of the neighboring nodes toward the sonobuoys. Extensive simulation experiments were performed to evaluate the efficiency of the proposed protocol. Simulation results revealed that the proposed protocol can effectively achieve better performance in terms of energy consumption, packet drop, and routing overhead compared with the similar routing protocol.     

Cell Selection for Load Balancing in Heterogeneous Networks

The vision of advanced long-term evolution (LTE-A) project is set to ultimate increase of network capacity in heterogeneous networks (HetNets). In HetNets with small cell configuration, a considerable majority of user devices is eventually connected to the macrocell base station (MBS), while small base stations (BSs), such as femtocell access points (FAPs), are still without any user. This results in unbalanced load and reduces the data rate of macrocell user equipment (MUE). In this paper, a method is proposed for load balancing among FAPs, while desired throughput is achieved. The proposed method uses the estimated received signal strength from different BSs and adjusted pilot signals. Under the critical signal to interference plus noise ratio (SINR) condition, a list of candidate FAPs is prepared. The updated candidate list henceforth does not include the least visited FAPs, which in turn leads to lower unnecessary handoffs. Once the BS with the highest number of free RBs and the highest pilot signal power is selected, FAP allocates the RBs with higher SINRs (qualified RBs) to user. In the case of FAP unavailability, the algorithm compels users to connect to the MBS with adequate qualified RBs. The performance of the proposed method was evaluated under a variety of FAPs density, and the number and velocity of users in terms of throughput and Jain’s fairness index. The results evidence affordable improvements in the throughput and Jain’s index in comparison with other methods.     

Ultra-high-Q optical filter based on photonic crystal ring resonator

In this study, a photonic crystal ring resonator with a triangular lattice is used to design an optical filter. The proposed structure is able to filter the central wavelength of 1548 nm with a transmission coefficient of over 95%. Moreover, this structure has an ultra-high-quality factor (Q) of about 1290. With altering the features of the structure including the refractive index, the lattice constant and the radius of the rods in the resonator core, their effects on the central wavelength of the filter, transmission coefficient, quality factor and bandwidth are investigated. The plane wave expansion and finite-difference time-domain methods are used to extract photonic band gap and investigate the photonic behavior of the proposed structure, respectively.