A numerical method for determining the strain rate intensity factor under plane strain conditions

Using the classical model of rigid perfectly plastic solids, the strain rate intensity factor has been previously introduced as the coefficient of the leading singular term in a series expansion of the equivalent strain rate in the vicinity of maximum friction surfaces. Since then, many strain rate intensity factors have been determined by means of analytical and semi-analytical solutions. However, no attempt has been made to develop a numerical method for calculating the strain rate intensity factor. This paper presents such a method for planar flow. The method is based on the theory of characteristics. First, the strain rate intensity factor is derived in characteristic coordinates. Then, a standard numerical slip-line technique is supplemented with a procedure to calculate the strain rate intensity factor. The distribution of the strain rate intensity factor along the friction surface in compression of a layer between two parallel plates is determined. A high accuracy of this numerical solution for the strain rate intensity factor is confirmed by comparison with an analytic solution. It is shown that the distribution of the strain rate intensity factor is in general discontinuous.     

Electrodeposition of CuIn1−xGaxSe2 solar cells with a periodically-textured surface for efficient light collection

The photoresponse of CuIn_1?xGa_xSe₂ (CIGS) solar cells is improved using a periodically-textured structure as an antireflection layer. The CIGS absorber layers were prepared by one-step electrodeposition from an aqueous solution containing 12 mM CuSO₄, 25 mM In₂(SO₄)₃, 28 mM Ga₂(SO₄)₃, and 25 mM SeO₂. The electrodeposited CIGS films exhibit the (112)-preferred orientation of the chalcopyrite structures and feature improved film stoichiometry after the selenization process. In addition, the lower bandgap value of 0.97 eV is caused by the discrepancy of the reduction potentials for each constituent, resulting in insufficient Ga content in the deposited films. Using self-assembled silica nanoparticles as the etching mask, periodically-textured structures can be easily formed on an indium tin oxide (ITO)-coated soda lime glass to achieve a low average reflection (<10.5%) in a wide wavelength and incident angle range. With the periodic textured structures suppressing light reflections from the front surface, the photogenerated current in the semi-transparent CIGS solar cells made with transparent conducting electrodes is 1.82 times higher than they otherwise would be.     

Preparation and Application of Immobilized Fullerene C60‐Heparin for Anticoagulation of Blood

The interaction between fullerene C60 and heparin was studied using a fullerene C60‐coated piezoelectric quartz crystal sensor. The irreversible response of the piezoelectric quartz crystal was found which could be attributed to the quite strong adsorption of heparin onto the C60 molecule. Immobilized fullerene C60‐Heparin was prepared and successfully applied as a good inhibitor for blood clotting. Like solvated heparin, both wet and dry C60‐heparin solid all demonstrated excellent ability of anticoagulation of blood. The blood clotting time with C60‐heparin solid was found to be > 7 days, while only 17.9 min required for blood clotting time in the absence of C60‐heparin solid. Furthermore, the C60‐heparin coated artificial PVC blood vessels were prepared by coating fullerene C60 onto the surface of artificial PVC blood vessels, followed by the adsorption of water solvated heparin onto the fullerene C60 molecule to form C60‐heparin coating. The blood clotting time of blood in artificial PVC blood vessels with C60‐heparin coating was found to be > 30 days, while only ≤ 30 min. of blood clotting time without the C60‐Heparin coating was observed. The C60‐heparin coated artificial PVC blood vessels can be expected to be employed in human body for the anticoagulation of blood.     

Computer simulations of nanoindentation on Cu (1 1 1) with a void

This paper employs static atomistic simulations to investigate the effect of a void on the nanoindentation of Cu (1 1 1). The simulations minimize the potential energy of the complete system via finite element formulation to identify the equilibrium configuration of any deformed state. The size and depth of the void are treated as two variable parameters. The numerical results reveal that the void disappears when the indentation depth is sufficiently large. A stress concentration is observed at the internal surface of the void in all simulations cases. The results indicate that the presence of a void has a significant influence on the nanohardness extracted from the nanoindentation tests.     

A 210-GHz fT SiGe HBT with a non-self-aligned structure

A record 210-GHz f_T SiGe heterojunction bipolar transistor at a collector current density of 6-9 mA/μm² is fabricated with a new nonself-aligned (NSA) structure based on 0.18 μm technology. This NSA structure has a low-complexity emitter and extrinsic base process which reduces overall thermal cycle and minimizes transient enhanced diffusion. A low-power performance has been achieved which requires only 1 mA collector current to reach 200-GHz f_T. The performance is a result of narrow base width and reduced parasitics in the device. Detailed comparison is made to a 120-GHz self-aligned production device     

Triphenylphosphine oxide-based bismaleimide and poly(bismaleimide): Synthesis,characterization, and properties

A novel phosphorus-containing bismaleimide, 3,3′-bis(maleimidophenyl)phenylphosphine oxide (BMPPPO), was synthesized from triphenylphosphine oxide. This bismaleimide exhibited good solubility in common organic solvents, such as methylethylketone, methylisobutylketone, dichloromethane, chloroform, tetrahydrofuran, acetone, methanol, ethanol, and hot toluene. A low melting point (T_m = 148 °C), a relatively low polymerization temperature (T_p = 214 °C), and a wide processing window (T_p − T_m = 66 °C) were also obtained for BMPPPO. This implies better processing capability. In contrast to most known phosphorus-containing polymers, the incorporation of BMPPPO into poly(bismaleimide) enhanced the polymer glass-transition temperature. Thermal stability at temperatures over 550 °C and char yields in the high-temperature region over 700 °C were also improved. As a result, the flame-retardant properties of the poly(bismaleimide)s were improved. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1716–1725, 2001     

Polymer Coated Piezoelectric Quartz Crystal Protein Bio‐Sensors

A polymer coated piezoelectric crystal detection system with a home‐made computer interface for signal acquisition and data processing was prepared as a liquid chromatographic detector for various proteins. Various polymers, e.g., polyvinyl aldehhyde (polyacrolein) (PVA), polyacrylamide/glutaldehyde (PAA/GA) and bio‐gel A, were used as coating materials on quartz crystals for adsorption of various protein molecules, e.g., catalase (CA), hemoglobin (Hb), α‐chymotrypsin (Ch), albumin (Ab). The frequency responses of the polyacrlein coated piezoelectric detector for various proteins were in the order: catalase> hemoglobin> α‐chymotrypsin > albumin. In contrast, the order of the frequency responses of bio‐gel A and polyacrylamide/glutaldehyde coated piezoelectric crystals for these proteins were: hemoglobin> catalase > α‐chymotrypsin ≥ albumin and hemoglobin > albumin > catalase. The polyacrolein coated piezoelectric crystal protein detector exhibited a good linear frequency response with a high sensitivity of about 2.5×10³ Hz/(mg/mL) for catalase. In addition, bio‐gel A and polyacrylamide/glutaraldehyde coated crystals were sensitive to hemoglobin with sensitivities of about 4.5×10³ Hz/(mg/mL) and 3.0×10³ Hz/(mg/mL), respectively. Study of the interference of various organic molecules, e.g., alcohols, amines, ketones and carboxylic acids, in the detection of proteins with theses polymer coated crystals was also made. The polyacrolein coated crystal for proteins under went less interference from various organic molecules than bio‐gel A or polyacrylamide/glutaraldehyde coated crystals. Effects of coating load, concentration of proteins and flow rate of liquid chromatographic eluent were also investigated and discussed.     

Temperature dependence of excitonic emission in cubic CdSe thin film

A detailed photoluminescence investigation of the thermal redshift and broadening of the excitonic line of cubic CdSe film grown by molecular beam epitaxy is presented. Free excitonic emission from the cubic CdSe film was observed at low temperature. Temperature-dependent measurement was performed to obtain material parameters related to exciton-phonon interaction by fitting the experimental data to the phenomenological model. The relative contribution of both acoustic and optical phonon to the band gap shrinkage and exciton linewidth broadening are discussed. Exciton binding energy of 16±1.5 meV was determined from the Arrhenius analysis.     

Removal of H2S from Exhaust Gas by Use of Alkaline Activated Carbon

The purpose of this research was to select an activated carbon and alkaline solution blend that generated the best H₂S adsorption on alkaline-activated carbon. RB₂ (activated carbon) impregnated with NaOH solution was shown to have the optimum H₂S removal efficiency. The optimum NaOH concentration was 50 mg per gram of carbon. H₂S adsorption via RB₂-NaOH₅₀ was five times that of a corresponding fresh-activated carbon. The adsorption equivalent of H₂S is nearly 1 (mol-H₂S/mol-AOH), therefore, H₂S + AOH AHS + H₂O was the major reaction. The H₂S adsorption isotherm corresponded to the Freundlich isotherm.     

Synthesis of symmetrical 1,5-bis-thio-substituted anthraquinones for cytotoxicity in cultured tumor cells and lipid peroxidation

The synthesis of a series of anthraquinone moieties bearing symmetrical sulfur-linked substituents in the 1 and 5 positions is described. These compounds were evaluated for their ability to inhibit the growth of suspended rat glioma C6 cells and human hepatoma G2 cells, respectively. In addition, the redox property of the compounds was determined based on the inhibition of lipid peroxidation in model membranes. Compounds 2a and 2h in this series compared favorably and exhibited the most potent cytotoxicity (0.02, 0.05 microM) against C6 cells in the XTT colorimetric assay. As far as redox properties are concerned, all bis-thio-anthraquinones show potential lipid peroxidation in model membranes very close to that of mitoxantrone (MX), and 2a, 2d, 2e, 2i, 2j, and 2k have more potential than that of MX. The lack of cytotoxicity of compound 2i cannot be related to lipid peroxidation, but the steric and electronic properties of the side-chain substituent maybe impair effective recognition of the cleavable complex. In contrast to MX, 2a and 2h are cytotoxic in rat glioma C6 cells and do not enhance lipid peroxidation in model membranes.