Correlation of swirl number for a radial-type swirl generator

An experimental investigation was undertaken to derive a new correlation for the swirl number of a radial-type swirl generator under various Reynolds numbers and various vane angle conditions. A radial-type swirl generator with 16 rotary guide vanes was used to generate an annular swirling jet flow. The Reynolds numbers ranged from 60 to 6000, and the vane angles from 0° to 56°. Quantitative measurements for the velocities were made by using an optical method of laser-Doppler anemometry (LDA). Three-component velocity profiles of axial, radial, and azimuthal components at the swirling jet exit were measured for various flow conditions. A flow visualization method using smoke-wire and still photography was also applied to observe the flow patterns of the recirculation region behind the circular bluff body. Under low Reynolds number conditions, the swirl strength was found to be strongly dependent on the Reynolds number as well as on the guide vane angle. Based on the experimental results, a modified swirl number S is derived to characterize the swirling flow, which is useful for the design of a swirl generator.     

Dynamic Analysis of an Infinite Cylindrical Hole in a Saturated Poroelastic Medium

In this paper, the dynamic response of an infinite cylindrical hole embedded in a porous medium and subjected to an axisymmetric ring load is investigated. Two scalar potentials and two vector potentials are introduced to decouple the governing equations of Biot’s theory. By taking a Fourier transform with respect to time and the axial coordinate, we derive general solutions for the potentials, displacements, stresses and pore pressures in the frequency-wave-number domain. Using the general solutions and a set of boundary conditions applied at the hole surface, the frequency-wave-number domain solutions for the proposed problem are determined. Numerical inversion of the Fourier transform with respect to the axial wave number yields the frequency domain solutions, while a double inverse Fourier transform with respect to frequency as well as the axial wave number generates the time-space domain solution. The numerical results of this paper indicate that the dynamic response of a porous medium surrounding an infinite hole is dependant upon many factors including the parameters of the porous media, the location of receivers, the boundary conditions along the hole surface as well as the load characteristics.     

Single-layered graphene oxide nanosheet/polyaniline hybrids fabricated through direct molecular exfoliation

In this study, we used direct molecular exfoliation for the rapid, facile, large-scale fabrication of single-layered graphene oxide nanosheets (GOSs). Using macromolecular polyaniline (PANI) as a layered space enlarger, we readily and rapidly synthesized individual GOSs at room temperature through the in situ polymerization of aniline on the 2D GOS platform. The chemically modified GOS platelets formed unique 2D-layered GOS/PANI hybrids, with the PANI nanorods embedded between the GO interlayers and extended over the GO surface. X-ray diffraction revealed that intergallery expansion occurred in the GO basal spacing after the PANI nanorods had anchored and grown onto the surface of the GO layer. Transparent folding GOSs were, therefore, observed in transmission electron microscopy images. GOS/PANI nanohybrids possessing high conductivities and large work functions have the potential for application as electrode materials in optoelectronic devices. Our dispersion/exfoliation methodology is a facile means of preparing individual GOS platelets with high throughput, potentially expanding the applicability of nanographene oxide materials.     

Study of temperature distribution of sliding block with asperity surface

In this study, a numerical thermal model is developed for sliding block contact under various loads, sliding velocities and surface roughness. The temperature distributions are shown for perfectly insulated thermal conditions along noncontact surfaces. For a particular five‐peaks contact model, the maximum temperature at the central peak is slightly lhigher than the others. The temperature profile decreases as the distance to the symmetry axis increases, and then decreases dramatically at the noncontact area. It is clear to see that the maximum temperature locates at the symmetry central peak of the asperity contact area instead of the leading head of the smooth surface. The maximum temperature rise parameter increases as the pressure, sliding velocity and asperity roughness increased or conductivity decreased. This phenomenon becomes obvious for cases at high pressure, velocity and roughness and low conductivity. Particularly, the influence of roughness is not significant for low velocity. Similar results are found for the maximum temperature rise parameter difference between peaks or peaks/valleys. The simulation results of this asperity surface sliding block contact model are able to provide essential information for the components of microelectro—mechanical systems (MEMS) and biochemical reaction mechanism. Copyright © 2011 John Wiley & Sons, Ltd.     

Far-infrared radiation promotes angiogenesis in human microvascular endothelial cells via extracellular signal-regulated kinase activation

This study was designed to determine the in vitro angiogenic ability of far-infrared (FIR) radiation in the skin-derived cultured human microvascular endothelial cells and to elucidate the role of mitogen-activated protein kinases (MAPKs) in this process. The results revealed that FIR radiation from a WS(TM) TY301 FIR emitter activated p38 and extracellular signal-regulated kinase (ERK), but not Akt or c-Jun N-terminal protein kinases (JNK), and significantly promoted angiogenesis by increasing tube formation in Matrigel and the migration of cells across an eight micron polyester filter. The addition of 50 μM PD98059, a MEK inhibitor, significantly inhibited the activation of ERK and the enhanced angiogenesis; in contrast, the inhibition of p38 phosphorylation did not inhibit the enhanced angiogenesis. After FIR radiation, there was no increase in vascular endothelial growth factor (VEGF) isoforms (VEGF-A, -B, -C and -D) mRNA and VEGF protein, no increase phosphorylation of endothelial nitric oxide synthase (eNOS) detected using Western blotting, and no increase in NO production detected using flow cytometry in cells pre-incubated with the cell-permeable NO-binding dye diluted 4-amino-5-methylamino-2', 7'-difluorofluorescein diacetate (DAF-FM DA). This study revealed that FIR radiation possesses in vitro angiogenic activity via the activation of the MEK/ERK but not the VEGF/Akt/eNOS-dependent signaling pathways.     

Carbon nanofibers extracted from soot as a sorbent for the determination of aromatic amines from wastewater effluent samples

The isolation and characterization of carbon nanofibers from soot obtained by burning natural oil is reported. The fibers were extracted from the soot with tetrahydrofuran followed by sonication. The carbon nanofibers were mixed with poly(vinyl alcohol) and electrospun to get the nanofiber mat. The extraction ability of electrospun nanofibers for the separation and preconcentration of aromatic compounds such as 3-nitroaniline, 4-chloroaniline, 4-bromoaniline and 3,4-dichloroaniline were tested and efficiently evaluated using high performance liquid chromatography. Under optimized conditions, the method showed good linearity in a range of 0.5–50 μg L⁻¹ with correlation coefficient ranging from 0.989 to 0.998. High precision of the extraction with RSD values of 4.5–5.8% and low LOD value in a range of 0.009–0.081 μg L⁻¹ for all aniline compounds were achieved. The proposed microextraction method offers advantages such as easy operation, high recovery, fast extraction, minimal use of organic solvent and elimination of tedious solvent evaporation and reconstitution steps.     

A Solution‐Processed Air‐Stable Perylene Diimide Derivative for N‐type Organic Thin Film Transistors

For future all‐soluble organic thin film transistor (OTFT) applications, a new soluble n‐type air‐stable perylene diimide derivative semiconductor material with (trifluoromethyl)benzyl groups (TC–PDI–F) is synthesized. The film is formed by spin‐coating in air and optimized for OTFT fabrications. The transistor characteristics and air‐stability of the TC–PDI–F OTFTs is measured to investigate the feasibility of using solution‐processed TC–PDI–F for future OTFT applications. For all‐solution OTFT process applications, the transistor characteristics are demonstrated by using TC–PDI–F as an n‐type semiconductor material and liquid‐phase‐deposited SiO₂ (LPD–SiO₂) as a gate dielectric material. All processes (except material synthesis and electrode deposition) and electrical measurements are conducted in air.     

Mesostructured Arrays of Nanometer‐spaced Gold Nanoparticles for Ultrahigh Number Density of SERS Hot Spots

A novel one‐trough synthesis via an air‐water interface is demonstrated to provide hexagonally packed arrays of densely spaced metallic nanoparticles (NPs). In the synthesis, a mesostructured polyoxometalate (POM)‐silicatropic template (PSS) is first self‐assembled at the air‐water interface; upon UV irradiation, anion exchange cycles enable the free‐floating PSS film to continuously uptake gold precursors from the solution subphase for diffusion‐controlled and POM‐site‐directed photoreduction inside the silica channels. NPs ≈ 2 nm can hence be homogeneously formed inside the silica‐surfactant channels until saturation. As revealed via X‐ray diffraction, small‐angle X‐ray scattering (SAXS), grazing incidence SAXS, and transmission electron microscopy, the Au NPs directed by the PSS template are arrayed into a 2D hexagonal lattice with inter‐channel spacing of 3.2 nm and a mean along‐channel NP spacing of 2.8 nm. This corresponds to an ultra‐high number density (≈10¹⁹ NPs cm^?3) of narrowly spaced Au NPs in the Au‐NP@PSS composite, leading to 3D densely deployed hot‐spots along and across the mesostructured POM‐silica channels for surface‐enhanced Raman scattering (SERS). Consequently, the Au‐NP@PSS composite exhibits prominent SERS with 4‐mercaptobenzoic acid (4‐MBA) adsorbed onto Au NPs. The best 4‐MBA detection limit is 5 nm , with corresponding SERS enhancement factors above 10⁸.     

An investigation into a piezoelectrically actuated nebulizer with μEDM-made micronozzle array

This study uses micromachining techniques to fabricate a piezoelectrically actuated nebulizer with an easily assembled structure. The experimental measurement and numerical simulation have been performed to gain the insight of atomized droplet behavior and fluidic mechanics for the developed devices. It is expected that a better understanding of these physical insights can lead to various potential applications. Based on the results obtained from a series of investigations, this study has found the optimal operating conditions for the proposed nebulizer. Various test fluids with different viscosities and surface tensions are considered, including water, dilute alcohol, oil, and a honey-like fluid. A spray stability analysis is performed in which the operating voltage and frequency of the piezoelectric actuator in the nebulizer are varied and the corresponding changes in the ejected particle size, flow rate and ejection distance examined. Air trapped within the nebulizer reservoir adversely affects the injection performance. Hence, the effect of the operating parameters on the volume of air ingested into the reservoir during the nebulizer operation is investigated and discussed.     

A physical and scalable I-V model in BSIM3v3 for analog/digitalcircuit simulation

A new physical and continuous BSIM (Berkeley Short-Channel IGFET Model) I-V model in BSIM3v3 is presented for circuit simulation. Including the major physical effects in state-of-the art MOS devices, the model describes current characteristics from subthreshold to strong inversion as well as from the linear to the saturation operating regions with a single I-V expression, and guarantees the continuities of I_ds, conductances and their derivatives throughout all V_gs, V_ds, and T_bs, bias conditions. Compared with the previous BSIM models, the improved model continuity enhances the convergence property of the circuit simulators. Furthermore, the model accuracy has also been enhanced by including the dependencies of geometry and bias of parasitic series resistances, narrow width, bulk charge, and DIBL effects. The new model has the extensive built-in dependencies of important dimensional and processing parameters (e.g., channel length, width, gate oxide thickness, junction depth, substrate doping concentration, etc.). It allows users to accurately describe the MOSFET characteristics over a wide range of channel lengths and widths for various technologies, and is attractive for statistical modeling. The model has been implemented in the circuit simulators such as Spectre, Hspice, SmartSpice, Spice3e2, and so on