Low-power-consumption and high-gain CMOS distributed amplifiers using cascade of inductively coupled common-source gain cells for UWB systems

A distributed amplifier with new cascade inductively coupled common-source gain-cell configuration is presented. Compared with other existing gain-cell configurations, the proposed cascade common-source gain cell can provide much higher transconductance and, hence, gain. The new distributed amplifier using the proposed gain-cell configuration, fabricated via a TSMC 0.18-/spl mu/m CMOS process, achieves an average power gain of around 10 dB, input match of less than -20 dB, and noise figure of 3.3-6.1 dB with a power consumption of only 19.6 mW over the entire ultra-wideband (UWB) band of 3.1-10.6 GHz. This is the lowest power consumption ever reported for fabricated CMOS distributed amplifiers operating over the whole UWB band. In the high-gain operating mode that consumes 100 mW, the new CMOS distributed amplifier provides an unprecedented power gain of 16 dB with 3.2-6-dB noise figure over the UWB range.     

Comments on “Capture and Retransmission Control in Mobile Radio”

For original paper by Zorzi and Rao, see IEEE J. Sel. Areas Commun., vol.12, no.8, p.1289-98 (1994 October)     

High-power high-Modulation-speed 1060-nm DBR lasers for Green-light emission

We report on the static and dynamic performance of high-power and high-modulation-speed 1060-nm distributed Bragg reflector (DBR) lasers for green-light emission by second-harmonic generation. Single-wavelength power of 387 mW at 1060-nm wavelength and green power as high as 99.5 mW were achieved. A thermally induced wavelength tuning of 2.4 nm and a carrier-induced wavelength tuning of -0.85 nm were obtained by injecting current into the DBR section. Measured rise-fall times of 0.2 ns for direct intensity modulation and 0.6 ns for wavelength modulation make the lasers suitable for >50-MHz green-light modulation applications.     

Some Topological Properties of Solution Sets in a Second Order Differential Inclusion with m-point Boundary Conditions

We consider a class of m-point (m > 3) second order boundary value problem (P_F\cal{P}_{F}) in a separable Banach space E of the form W ^{2, 1}_E([0, 1])W ^{2, 1}_E([0, 1])-solutions of (P_F\cal{P}_{F}) is compact and is a retract in C¹_E([0, 1])C^1_E([0, 1]). A new existence result of W ^{2, 1}_E([0, 1])W ^{2, 1}_E([0, 1])-solutions and a related relaxation problem are also provided, here F is no longer bounded.     

A single-camera technique for simultaneous measurement of large solid particles transported in rapid shallow channel flows

This paper describes a measurement technique that was successfully applied in a study of bed load transport of large spherical solid particles in a shallow and supercritical flow (Fr?=?2.59–3.17) down a steep slope. The experimental condition was characterized by the relatively large solid particle size compared to the flow depth (d _p /h?=?0.23–0.35), and compared to the tracer diameter (d _p /d _t ?≈?130). The technique incorporated particle image velocimetry and particle tracking velocimetry (PTV) to simultaneously measure the characteristics of the two phases. In order to detect true solid particles and to distinguish them from each other and the unwanted objects, a particle characterization (PCR) algorithm based on Hough transform was employed. The output from the PCR process was utilized for PTV, as well as to generate the corresponding tracer images for special needs. Validation tests have confirmed the pixel accuracy and high reliability of the combined technique. Experimental results obtained with the developed technique include flow velocities, particle velocities, and concentration. The analysis has shown that the particle concentration profile followed an exponential relationship of the form similar to that of Rouse’s profiles, despite the large d _p /h ratio. It also revealed the effect of phase interaction, as a low loading rate of light particles on the order of O(10^?3) could yield a noticeable slowdown in the streamwise fluid velocity.     

Evaluation of interfacial toughness curve of bimaterial in submicron scale

A novel method combining the experimental data at only two different mixed mode fractures and an empirical interface toughness function has been proposed to establish the interfacial toughness function of a bimaterial in submicron scale. The modified four-point bend specimen was used in experiment to evaluate the first type of mixed mode fracture, while the sandwiched cantilever specimen was employed to get the second one. An empirical interface toughness function reflecting quite accurately the delamination behavior was adopted as a typical one. The obtained results investigated that the proposed method could be used to calibrate not only the interfacial fracture criteria at pure modes but also at any mixed mode fracture of bimaterials in submicron scale.     

Synthesis of Jasminaldehyde by Solid-Liquid Phase Transfer Catalysis Without Solvent,Under Microwave Irradiation

α-n-amylcinnamaldehyde (jasminaldehyde) was obtained with 82 % yield by solid-liquid phase transfer catalysis without solvent within 3 days at room temperature. By use of domestic microwave irradiation, the same yield was obtained within 1 minute at a power of 600 W.