Structural measures of element-oxygen bond covalency from the changes to the delocalisation of the carboxylate ligand

The data set of more than 40,000 crystal structures containing the carboxylate group that have been deposited in the CSD has been used to examine the structural changes that occur in the carboxylate C-O bond lengths upon binding to different elemental centres. We report here quantifiable structural changes that are dependent on the elemental centre with which the group is interacting. For the main-group elements the trends are entirely periodic and follow those traditionally associated with covalency; elements exhibiting electronegativity closest to that of oxygen exhibit the largest structural change. In addition, we find the measure is extendable to both the transition metals and the lanthanoids and actinoids. Amongst the transition metals the trends of Pauling neutrality are not only maintained, but are quantifiable. The difference between the two C-O bond lengths increases with oxidation state and decreases with an increase in coordination number. All of the lanthanoids exhibit covalency within error of each other and the bonds to the actinoids are found to be more covalent than those to the lanthanoids. From the data analysis we are able to derive a correlation between the lengths of the two carboxylate arms that allows us to quantify percentage covalent character defined in terms of the resonance contributions to the carboxylate group.     

Photocatalytic synthesis of copper colloids from CuII by the ferrihydrite core of ferritin

The iron-storage protein ferritin encapsulates a nanoparticle of iron oxide. The size and properties of these nanoparticles can be adjusted by controlled oxidative hydrolysis reactions of Fe(II). This mineralized ferritin protein cage has previously been shown to act as an effective photocatalyst for reduction of Cr(VI). In the present work, we demonstrate that Fe(O)OH-mineralized ferritin catalyzes the photoreduction of Cu(II) to form a stable, air-sensitive, colloidal dispersion of Cu(0). In addition, the particle sizes of the Cu colloids can be controlled by varying the ratio of Cu(II) to ferritin. This illustrates an important principle, namely that the properties of one preformed material can be utilized for the specific synthesis of a second material, thus tailoring the desired physical properties of the final products. This procedure represents a multistep materials synthesis: the formation of a new nanomaterial from a catalytic precursor.     

Irradiation of aromatic polymers: The effect of irradiation temperature on crosslinking and scission in polystyrene

Polystyrene of narrow molecular weight distribution, M _w/M _n ≈ 1.03, was subjected to γ irradiation at 100 and 150°C. The yields of scission and crosslinking, G(S) and G(X), where determined from the changes in molecular weight distribution using gel permeation chromatography, (GPC) with supporting evidence from osmometry and viscometry. The ratio G(S)/G(X) increased from 0.02 at 30°C, obtained previously, to 2.8 at 150°C. This was mainly due to a tenfold increase in G(S), whereas G(X) apparently decreased slightly. These results are compatible with increased disproportion of chain scission radicals relative to their combination, analogous to the temperature dependence of mutual termination in the free radical polymerization of styrene. There was no obvious discontinuity through the glass transition temperature, although there may be a change in sign of the temperature coefficient of G(X). This system provides an excellent example of the applicability of measurements of molecular weight distributions and averages to determinations of G(S) and G(X) under conditions when gel measurements are inappropriate, either because of the failure of the system to form gel, or, as in the present case, because of the very large radiation doses required for gel formation.     

Rotational and vibrational temperatures of naphthalene in a naphthalene-argon supersonic jet

In the $\text{A}$¹B_2u-$\text{X}$¹A_g system of naphthalene in a supersonic jet, rotational contour calculations show rotational temperatures of 2–60 K for argon carrier gas pressures of 1520-120 Torr. The b_1u vibration v₂₄ shows a high vibrational temperature which corresponds to the seeding temperature for pressures <400 Torr.     

Chemical modification of a viral cage for multivalent presentation

Here we present generalized methods for chemically modifying the surface of a viral protein cage; this exploits the chemistry of native and engineered surface exposed functional groups for multivalent presentation of ligands.     

Stabilization of a K+-(bis-Cage-Annulated 20-Crown-6) Complex by Bidentate Picrate

Bis-cage-annulated 18-crown-6 and 20-crown-6 macrocyclic ethers (i.e., 1 and 2, respectively) have been synthesized, and their alkali metal picrate extraction profiles have been determined. Host system 1 proved to be a significantly more avid alkali metal cation complexant than 2 and somewhat more avid than 18-crown-6. Both 1 and 18-crown-6 display modest selectivity toward K⁺ and Rb⁺. A stable host–guest complex was prepared by slow evaporation of a CH₂Cl₂–hexane solution of an equimolar mixture of 2 and potassium picrate. The X-ray crystal structure of this complex reveals that picrate anion functions as a bidentate ligand therein. The gas-phase interaction energy between the 2 K⁺ complex and picrate anion was calculated to be ca. –64.9 kcal mol^–1, thereby indicating that participation of picrate anion as an additional bidentate ligand results in significant stabilization of complex 10.     

A resonance Raman,surface-enhanced resonance Raman,IR, and ab initio vibrational spectroscopic study of nickel(II) tetraazaannulene complexes

The IR and resonance Raman spectra of the nickel(II) complexes of dibenzo[b,i][1,4,8,11]tetraaza[14]annulene (TAA) and 5,7,12,14-tetramethyldibenzo[b,i][1,4,8,11]tetraaza[14]annulene (TMTAA) have been measured and compared with ab initio calculations of the vibrational wavenumbers at the B3-LYP level using the LanL2DZ basis set. An excellent fit is found between the experimental and calculated data, enabling precise vibrational assignments to be made. Surface-enhanced resonance Raman spectra were obtained following adsorption on Ag electrodes, with potentials in the range -0.1 to -1.1 V vs Ag/AgCl. There is evidence for contributions from both the electromagnetic and charge transfer (CT) surface enhancement mechanisms. The data indicate that variations in band intensities with electrode potential can be interpreted in terms of the CT mechanism.     

Structural properties of ultra-small thorium and uranium dioxide nanoparticles embedded in a covalent organic framework

We report the structural properties of ultra-small ThO₂ and UO₂ nanoparticles (NPs), which were synthesized without strong binding surface ligands by employing a covalent organic framework (COF-5) as an inert template. The resultant NPs were used to observe how structural properties are affected by decreasing grain size within bulk actinide oxides, which has implications for understanding the behavior of nuclear fuel materials. Through a comprehensive characterization strategy, we gain insight regarding how structure at the NP surface differs from the interior. Characterization using electron microscopy and small-angle X-ray scattering indicates that growth of the ThO₂ and UO₂ NPs was confined by the pores of the COF template, resulting in sub-3 nm particles. X-ray absorption fine structure spectroscopy results indicate that the NPs are best described as ThO₂ and UO₂ materials with unpassivated surfaces. The surface layers of these particles compensate for high surface energy by exhibiting a broader distribution of Th–O and U–O bond distances despite retaining average bond lengths that are characteristic of bulk ThO₂ and UO₂. The combined synthesis and physical characterization efforts provide a detailed picture of actinide oxide structure at the nanoscale, which remains highly underexplored compared to transition metal counterparts.

ThO₂ and UO₂ nanoparticles synthesized using a COF-5 template exhibit unpassivated surfaces and provide insight into nanoscale properties of actinides.     

Modeling Pb sorption to microporous amorphous oxides as discrete particles and coatings

Hydrous amorphous Al (HAO), Fe (HFO), and Mn (HMO) oxides are ubiquitous in the subsurface as both discrete particles and coatings and exhibit a high affinity for heavy metal contaminants. To assess risks associated with heavy metals, such as Pb, to the surrounding environment and manage remedial activities requires accurate mechanistic models with well-defined transport parameters that represent sorption processes. Experiments were conducted to evaluate Pb sorption to microporous Al, Fe, and Mn oxides, as well as to montmorillonite and HAO-coated montmorillonite. Intraparticle diffusion, a natural attenuating process, was observed to be the rate-limiting mechanism in the sorption process, where best-fit surface diffusivities ranged from 10(-18) to 10(-15) cm(2) s(-1). Specifically, diffusivities of Pb sorption to discrete aluminum oxide, aluminum oxide-coated montmorillonite, and montmorillonite indicated substrate surface characteristics influence metal mobility where diffusivity increased as affinity decreased. Furthermore, the diffusivity for aluminum oxide-coated montmorillonite was consistent with the concentrations of the individual minerals present and their associated particle size distributions. These results suggest that diffusivities for other coated systems can be predicted, and that oxide coatings and montmorillonite are effective sinks for heavy metal ions.     

Charge density analysis of two polymorphs of antimony(III) oxide

High-resolution X-ray diffraction data have been collected on the cubic polymorph of antimony(III) oxide (senarmontite) to determine the charge distribution in the crystal. The results are in quantitative agreement with crystal Hartree-Fock calculations for this polymorph, and have been compared with theoretical calculations on the orthorhombic polymorph (valentinite). Information about the nature of bonding and relative bond strengths in the two polymorphs has been extracted in a straightforward manner via topological analysis of the electron density. All the close contacts in both polymorphs are found to be similar in nature based on the value of the Laplacian, the magnitude of the electron density and the local energy density at the bond critical points, and these characterise the observed interactions as substantially polar covalent, similar to molecular calculation results on Si-O and Ge-O. Electrostatic potential isosurfaces reveal the octopolar nature of this function for senarmontite, and shed light on the observed packing arrangement of Sb4O6 molecules in the crystal.