Two-dimensional network formation of cardiac myocytes in agar microculture chip with 1480 nm infrared laser photo-thermal etching

We have developed a new method that enables agar microstructures to be used to cultivate cells and that allows cell network patterns to be controlled. The method makes use of non-contact three-dimensional photo-thermal etching with a 1480 nm infrared focused laser beam, which is strongly absorbed by water and agar gel, to form the shapes of agar microstructures. It allows microstructures to be easily formed in an agar layer within a few minutes, with cell-culture holes formed by the spot heating of a 100 mW laser and tunnels by the tracing of a 100 microm s(-1), 40 mW laser. We cultivated rat cardiac myocytes in adjacent microstructures and observed synchronized beating in them 90 min after they had made physical contact. Our results indicate that the system can make and use microstructures for cell-network cultivation in a minimal amount of time without any expensive microfabrication facilities or complicated procedures.     

Polymerization of acrylamide initiated with pinacol–ceric ion redox system

Polymerization of acrylamide initiated with a pinacol–ceric ion redox system was investigated. The polymer obtained was found to contain one cerium atom in a polymer molecule. It was considered that the cerium atom was introduced into the polymer molecule by the termination reaction as there is no cerium atom in the initiating radical in the present system. A similar termination reaction was attained by ferric ion but not by cerous ion. The metal ion was considered to terminate the polymerization to form a stable polymer. Some considerations on the structure of the reaction product relating to the polymerization mechanism were discussed.     

Second-order nonlinear optical properties from poled silicate channel-waveguide

Thin film waveguides of germanosilicate glass are fabricated byrf-sputtering. Second-order nonlinearity ofd ₃₃=3.2 pm/V is obtained from electrically poled film, and the lifetime of the nonlinearity is found to be310 years. The poled channel-waveguide is prepared and the Cerenkov-type phase-matched frequency doubling is successfully observed.     

Michael addition reactions of acetoacetates and malonates with acrylates in water under strongly alkaline conditions

Michael addition reactions of acetoacetates and malonates with acrylates in a 5 M KOH aqueous solution without using any other catalysts are described. When they are either tert-butyl or benzyl esters, the reaction proceeded very rapidly to afford moderate to high yields of the corresponding bis-Michael adducts that are unexpectedly stable under these conditions.     

pH-regulated formation of amyloid-like beta-sheet assemblies from polyglutamate grafted polyallylamine

A novel artificial protein with simple primary structure, poly(gamma-methyl-L-glutamate)-grafted polyallylamine, has been prepared and the resultant peptide has shown a unique property of pH-regulated conformation and morphology.     

Efficient synthesis of isoplagiochin D, a macrocyclic bis(bibenzyls), by utilizing an intramolecular Suzuki-Miyaura reaction

Isoplagiochin D, a highly strained macrocyclic bis(bibenzyls) with two biaryl units isolated from the liverwort Pladiochila fruticosa, was prepared in 10.6% overall yield for the 11 steps by an efficient synthetic approach involving the construction of two bibenzyl and one biaryl units using Horner-Wadsworth-Emmons and Suzuki-Miyaura protocols.     

Alternating copolymerization of 1- and 2-vinylnaphthalene with methyl methacrylate by using diethylaluminum chloride

The alternating copolymerization of 1- and 2-vinylnaphthalene (1-VNap and 2-VNap) with methyl methacrylate (MMA) by using diethylaluminum chloride (Et₂AlCl) in toluene at 0°C has been studied. No polymerization could occur without Et₂AlCl, and alternating copolymers were obtained only when an equimolar amount of Et₂AlCl with MMA was supplied. Through ¹H-NMR analyses on both dyad and triad of alternating deuterated 1- and 2-α-d-VNap–MMA copolymers, each configuration could be described successfully by a single parameter, coisotacticity σ, whose value was estimated as 0.41 for the former and 0.56 for the latter copolymer, respectively. A rather low coisotacticity of copoly(1-VNap–MMA) was explained in the terms of steric effect (peri effect) of 1-VNap monomer.     

Effects of dipole moment, linkers, and chromophores at side chains on long-range electron transfer through helical peptides

Octadecapeptides carrying a ferrocene moiety at the molecular terminal were self-assembled on gold, and long-range electron transfer from the ferrocene moiety to gold was investigated by electrochemical methods. Effects on electron transfer of dipole moment of helical peptides, linkers connecting the peptide to gold, and chromophores introduced into the side chains were discussed. Cyclic voltammetry of the monolayers in an aqueous solution revealed that long-range electron transfer over 40 A occurred along the peptide molecule. Chronoamperometry showed that the long-range electron transfer should be ascribed to a hopping mechanism with use of amide groups as hopping sites. Electron transfer through the long peptide was not significantly accelerated by the dipole moment. However, the linker remarkably affected electron transfer depending on whether it was a methylene chain or a phenylene group, suggesting that local electron transfer between gold and the peptides should be the slowest step to determine the overall rate. Pyrenyl groups introduced into the side chains in the middle of the peptide molecule did not noticeably change electron transfer, probably because pyrenyl groups were too distant to allow direct electron transfer between them. Electrostatic potential profiles across the peptide monolayers were also calculated to explain reasonably the several interesting features in the present peptide systems.     

Cationic polymerization of formaldehyde in liquid carbon dioxide. Part II: A kinetic study of the polymerization

The kinetic behavior on the polymerization of formaldehyde with and without acidic catalyst, in liquid carbon dioxide, in the temperature range of 30 to 50°C. was investigated. In the polymerization without catalyst both the polymer yield and the degree of polymerization increased with reaction time and also with rising temperature. With acidic catalyst, such as acetic acid and dichloroacetic acid, both the polymer yield and the degree of polymerization increased more than that in the polymerization without catalyst. The overall rate of polymerization with and without acidic catalyst was expressed by the first-order rate equation with respect to monomer concentration. From the results it was concluded that the polymerizations belonged to a type of successive polymerization with rapid initiation and no termination. The rate constant and the activation energy of each elementary process of polymerization were estimated on the basis of the results.     

Mechanism of the CO oxidation reaction on O-precovered Pt(111) surfaces studied with near-edge x-ray absorption fine structure spectroscopy

The mechanism of CO oxidation reaction on oxygen-precovered Pt(111) surfaces has been studied by using time-resolved near-edge x-ray absorption fine structure spectroscopy. The whole reaction process is composed of two distinct paths: (1) a reaction of isolated oxygen atoms with adsorbed CO, and (2) a reaction of island-periphery oxygen atoms after the CO saturation. CO coadsorption plays a role to induce the dynamic change in spatial distribution of O atoms, which switches over the two reaction paths. These mechanisms were confirmed by kinetic Monte Carlo simulations. The effect of coadsorbed water in the reaction mechanism was also examined.