Characterization of amorphous hydrogenated carbon formed by low-pressure inductively coupled plasma enhanced chemical vapor deposition using multiple low-inductance antenna units

Three-dimensional plasma enhanced chemical vapor deposition (CVD) of hydrogenated amorphous carbon (a-C:H) has been demonstrated using a new type high-density volumetric plasma source with multiple low-inductance antenna system. The plasma density in the volume of phi 200 mm x 100 mm is 5.1 x 10(10) cm(-3) within +/-5% in the lateral directions and 5.2 x 10(10)cm(-3) within +/-10% in the axial direction for argon plasma under the pressure of 0.1 Pa and the total power as low as 400 W. The uniformity of the thickness and refractive index is within +/-3.5% and +/-1%, respectively, for the a-C:H films deposited on the substrates placed on the six side walls, the top of the phi 60 mm x 80 mm hexagonal substrate holder in the pure toluene plasma under the pressure is as low as 0.04 Pa, and the total power is as low as 300 W. It is also found that precisely controlled ion bombardment by pulse biasing led to the explicit observation in Raman and IR spectra of the transition from polymer-like structure to diamond-like structure accompanied by dehydrogenation due to ion bombardment. Moreover, it is also concluded that the pulse biasing technique is effective for stress reduction without a significant degradation of hardness. The stress of 0.6 GPa and the hardness of 15 GPa have been obtained for 2.0 microm thick films deposited with the optimized deposition conditions. The films are durable for the tribology test with a high load of 20 N up to more than 20,000 cycles, showing the specific wear rate and the friction coefficient were 1.2 x 10(-7) mm3/Nm and 0.04, respectively.     

Synthesis and structural, electronic, and optical properties of oligo(thienylfuran)s in comparison with oligothiophenes and oligofurans

[structure: see text] Alternate thiophene/furan oligomers having four and six heterocycles, i.e., oligo(thienylfuran) dimer and trimer 2 (n = 4 and 6), were newly synthesized by repetitive Stille coupling reactions. The structural, electronic, and optical properties of these oligomers were investigated by X-ray crystallography (for n = 4), cyclic voltammetry (CV), UV-vis and fluorescence spectroscopy, and DFT calculations, and the results were compared with those of corresponding oligothiophenes (1) and oligofurans (3). The inter-ring torsional energy profiles calculated for bithiophene 1 (n = 2), thienylfuran 2 (n = 2), and bifuran 3 (n = 2) at the B3LYP/6-31G(d) level indicated that the most stable conformers of 2 (n = 2) and 3 (n = 2) are fully coplanar with transoid structure while that of 1 (n = 2) is twisted with a dihedral angle of 158 degrees . In accord with this, X-ray crystallographic analysis of 2 (n = 4) revealed that the pi-conjugated system is nearly planar with the inter-ring C=C-C=C dihedral angles between the thiophene and furan rings of 173.6(7) degrees , -177.0(7) degrees , and 172.6(6) degrees . In the packing structure, these nearly planar molecules are arranged in a herringbone pattern. The CV on a series of oligo(thienylfuran)s 2 showed irreversible oxidation peaks at +0.90, +0.42, and +0.29 V vs Fc/Fc(+) for n = 2, 4, and 6, which were 0.15-0.18 V lower than those for corresponding oligothiophenes 1 and were closer to those for oligofurans 3. On the other hand, the UV-vis spectra of 2 showed the longest wavelength absorption to be almost identical with those of the corresponding 1, and more bathochromically shifted than those of the corresponding 3. The results of CV and UV-vis measurements were supported by DFT calculations (B3LYP/ 6-311+G(2d,p)//B3LYP/6-31G(d)). Thus, oligo(thienylfuran)s 2 have HOMOs which are higher than those of oligothiophenes 1 and close to those of 3, and HOMO-LUMO gaps which are close to those of 1 and smaller than those of 3. In fluorescence spectra, the quantum yield of 2 increased with elongation of the pi-system (n = 2 (3.5%), 4 (19%), 6 (24%)).     

Kinetics of the radical scavenging activity of β-carotene-related compounds

To clarify the non-enzymatic radical-scavenging activity of β-carotene-related compounds and other polyenes, we used differential scanning calorimetry to study the kinetics of radical polymerization of methyl methacrylate (MMA) by 2,2′-azobisisobutyronitrile (AIBN) or benzoyl peroxide (BPO) in the absence or presence of polyenes under nearly anaerobic conditions at 70°C, and analyzed the results with an SAR approach. The polyenes studied were all-trans retinol, retinol palmitate, calciferol, β-carotene and lycopene. Polyenes produced a small induction period. The stoichiometric factor (n) (i.e. the number of radicals trapped by each inhibitor molecule) of polyenes was close to 0. Tetraterpenes (β-carotene, lycopene) suppressed significantly more of the initial rate of polymerization (R ^inh) than did diterpenes (retinol, retinol palmitate). The inhibition rate constants (k ^inh) for the reaction of β-carotene with AIBN-or BPO-derived radicals were determined to be 1.2–1.6?×?10⁵ l?/?mol?s, similar to published values. A linear relationship between k ^inh and the kinetic chain length (KCL) for polyenes was observed; as k ^inh increased, KCL decreased. KCL also decreased significantly as the number of conjugated double bonds in the polyenes increased. Polyenes, particularly β-carotene and lycopene, acted as interceptors of growing poly-MMA radicals.     

Effects of Bis(aromatic) Pendants on Recognition of Nucleobase Thymine by Zn2+ -1,4,7,10-tetraazacyclododecane (Zn2+ -cyclen)

We have previously shown that the nucleobase thymine binding to Zn²⁺ -cyclen (cyclen=1,4,7,10-tetraazacyclododecane) complex became stronger by appending acridine, naphthalene, or quinoline rings to the cyclen. Amongst these, the pendant bis((1-naphthyl)methyl) or bis((4-quinolyl)methyl) groups yielded the most effective thymine-recognizing Zn²⁺ -cyclen complexes [J. Am. Chem. Soc., 121 (1999) 5426]. The present study was undertaken to find causes of the bis(aromatic) ring effect by X-ray crystal structure analysis and NMR studies. The crystal structure of the Zn²⁺ -bis((1-naphthyl)methyl)-cyclen complex with a deprotonated 1-methylthymine (1-MeT) failed to show the anticipated evidence for the double ~ - ~ stacking interactions between the two naphthalenes and the Zn 2+ -bound 1-MeT m (1-MeT m =N(3')-deprotonated 1-MeT). Crystal data: formula C₃₆ H₄₇ N₇ O₇ Zn, M r =755.19, monoclinic, space group P2₁/ c (No. 14), a =15.438(2) Å, b =14.093(3) Å, c =16.726(2) Å, g =90.53(1) V =3638.7(8) Å 3 Z =4, R =0.035, R _w =0.049. However, the ¹H NMR studies of Zn²⁼ -bis((4-quinolyl)methyl)-cyclen with 1-MeT in varying H₂O/CH₃ CN solution showed increasing upfield shifts of Me(5') and H(6') of the Zn²⁺ -bound 1-MeT in more aqueous media, indicating that the double intercalation with the two quinolines became more significant in more protic environments. We conclude that the double ~ - ~ stacking effect accounts for the enhanced recognition of thymine base by the appended bis((1-naphthyl)methyl) or bis((4-quinolinyl)methyl) groups.     

One‐Pot Synthetic Procedure for2,2′‐Disubstituted Biaryls via the Suzuki Coupling Reaction of Aryl Triflates in a Biphasic Solvent System

A one‐pot synthetic procedure for 2,2′‐disubstituted biaryls was developed via a Suzuki cross‐coupling reaction of aryl triflates in a biphasic solvent system. The effects of various bases and solvents were investigated. Results showed that the Na₂CO₃–toluene/H₂O combination gave the highest yields.     

Electrothermal atomic absorption spectrometric determination of cadmium in environmental samples with niobium wire preconcentration method

A preconcentration method by adsorption of cadmium on a niobium wire was developed for the environmental waters, followed by electrothermal atomic absorption spectrometry with a tungsten tube atomizer. After the preconcentration, the niobium wire was directly inserted into the tungsten tube atomizer. In the preconcentration (adsorption) process of cadmium, the optimal immersing time was 60?s. The effects of large amounts of concomitants on the preconcentration of cadmium were evaluated. When 10³–10⁴ fold excess of matrix elements existed in aqueous solution at pH 4 and 9, the cadmium response was profoundly affected by the matrix elements. However, the cadmium absorption signal was not significantly influenced at pH 7. Therefore, pH 7 was selected for the application into the real environmental samples. Under the optimal conditions, the detection limit (3S/N) for cadmium by the niobium wire preconcentration method was 7.0?pg?mL^?1 and the relative standard deviation was 6.8%. The method with preconcentration on a niobium wire was applied to the determination of cadmium in water and proved to be sensitive, simple and convenient. Because this preconcentration method can be utilized in the in situ treatment of trace cadmium in environmental water samples, it was unnecessary to carry the water samples to the analytical work place. The technique was shown to be useful for the determination of cadmium in environmental water samples at 0.1–1?µg?L^?1 levels.     

Preconcentration of trace silver with yeast for river water analysis

A new preconcentration method with yeast is presented. The method was evaluated for the determination of trace silver in river waters by graphite furnace atomic absorption spectrometry (GFAAS). A suitable cultivation bed for preconcentration of silver was 1.75 mg ml-1 2-ammonium hydrogen phosphate. The optimal cultivation time and temperature were 2 h and 25 degrees C. Under optimal conditions, silver in aqueous sample was concentrated to 6.9-fold by yeast. The detection limit was 4.6 pg ml-1 (3S/N) for silver in river water. The yeast preconcentration method was applied to the determination of silver in river waters. The recovery of spiked silver was in the range of 89 to 110%. By the preconcentration, it was found that ultra trace silver in river waters could be determined without interferences of matrix elements, after only the cultivation and with no chemical treatment.     

Studies on taxol biosynthesis. Preparation of 5α-acetoxytaxa-4(20),11-dien-2α,10β-diol derivatives by deoxygenation of a taxadiene tetra-acetate obtained from Japanese yew

The putative metabolite, 5α-acetoxytaxa-4(20),11-dien-2α,10β-diol (7), which is a promising candidate as a biosynthetic pathway triol in taxol biosynthesis, has been prepared by Barton deoxygenation of the C-14-hydroxyl group of a differentially protected derivative of natural 2α,5α,10β-triacetoxy-14β-(2-methyl)-butyryloxytaxa-4(20),11-diene (8), a major taxoid metabolite isolated from Japanese Yew heart wood. The synthetic protocol devised, is amenable for the preparation of isotopically labeled congeners that will be useful to probe further intermediate steps in the biosynthesis of taxol.     

Metal-ion-assisted hydrolysis of dipeptides involving a serine residue in a neutral aqueous solution

Dipeptides having a serine residue at the C-terminus, X-Ser, where X is an appropriate amino acid residue, were efficiently hydrolyzed in the presence of ZnCl2 at pH 7.0. The rapid hydrolysis of X-Ser is due to an autocatalysis of the hydroxy group in the serine residue, and is found to be accelerated by a metal ion, in particular by ZnCl2. Roles of the metal ion in the hydrolysis of peptides involving a serine residue, in relation to the recently reported protein cleavages, are discussed.