THE USE OF THERMOELASTICITY TO EVALUATE STRESS REDISTRIBUTION AND NOTCH SENSITIVITY IN CERAMIC MATRIX COMPOSITES

Thermoelastic stress analysis was used to document the effect of composite damage on the stress distribution in three ceramic matrix composites. Composite damage was found to significantly alter the thermoelastic response of each material, with the greatest effect noted in SiC/CAS. Thermoelastic imaging of these materials affords a more complete picture of how the various damage mechanisms affect the stress distribution. In particular, a stress concentration factor computed from thermoelastic images, serves as an indicator of stress redistribution. The stress concentration factors were computed by comparing notch root to far field temperatures, and monitored after the introduction of various amounts of damage. In each material, the stress concentration factor diminished as the damaging load approached the ultimate stress. Reduction in the stress concentration is associated with local changes in modulus, mechanistically arising from combinations of fiber, matrix and interface fracture. Stress redistribution occurs as a consequence of modulus changes, leading to lower notch sensitivity in each of the tested composites.     

Miscible blends of modified poly(aryl ether ketones) with aromatic polyimides

The phase behavior of binary blends of poly(ether ether ketone) (PEEK), sulfonated PEEK, and sulfamidated PEEK with aromatic polyimides is reported. PEEK was determined to be immiscible with a poly(amide imide) (TORLON 4000T). Blends of sulfonated and sulfamidated PEEK with this poly(amide imide), however, are reported here to be miscible in all proportions. Blends of sulfonated PEEK and a poly(ether imide) (ULTEM 1000) are also reported to be miscible. Spectroscopic investigations of the intermolecular interactions suggest that formation of electron donoracceptor complexes between the sulfonated/sulfamidated phenylene rings of the PEEKs and the n-phenylene units of the polyimides are responsible for this miscibility. © 1993 John Wiley & Sons, Inc.     

Error floor of MSK modulation in a mobile-radio channel with twoindependently fading paths

We investigate the error probability bit error rate (BER) of minimum shift keying (MSK) modulation with differential detection in a two-path fading channel without noise (error floor). We develop a new method for the computation of the BER: we show that errors occur if the phasors of the instantaneous impulse response fall into certain regions of the complex plane; then we average over the statistics of the phasors to arrive at the mean BER. With this method, we derive analytical expressions for the BER for arbitrary amplitude statistics of the paths. For the special case of two Rayleigh-fading paths with small delay, we find that the BER is proportional to the square of the mean delay spread (normalized to the bit length) if we sample between the two pulses. This proves the qualitative behavior of previous estimates, but our results allow also a more exact quantitative formulation. The quadratic dependence of the BER on the delay spread breaks down if we have one Rayleigh-fading and one Rician-fading path. We find that the bit combinations 1-11 and -11-1 do not lead to errors in the two-path model. However, additional Monte Carlo simulations show that these bit combinations do lead to errors in a three-path model     

Addressing substrate coupling in mixed-mode ICs: simulation andpower distribution synthesis

This paper describes new techniques for the simulation and power distribution synthesis of mixed analog/digital integrated circuits considering the parasitic coupling of noise through the common substrate. By spatially discretizing a simplified form of Maxwell's equations, a three-dimensional linear mesh model of the substrate is developed. For simulation, a macromodel of the fine substrate mesh is formulated and a modified version of SPICE3 is used to simulate the electrical circuit coupled with the macromodel. For synthesis, a coarse substrate mesh, and interconnect models are used to couple linear macromodels of circuit functional blocks. Asymptotic Waveform Evaluation (AWE) is used to evaluate the electrical behavior of the network at every iteration in the synthesis process. Macromodel simulations are significantly faster than device level simulations and compare accurately to measured results. Synthesis results demonstrate the critical need to constrain substrate noise and simultaneously optimize power bus geometry and pad assignment to meet performance targets     

Photonic packet switches: architectures and experimentalimplementations

Photonic packet switches offer high speed, data rate and format transparency, and flexibility required by future computer communications and cell-based telecommunications networks. In this paper, we review experimental progress in state-of-the-art photonic packet switches with an emphasis on all-optical guided-wave systems. The term all-optical implies that the data portion of a packet remains in optical format from the source to the destination. While the data remain all-optical, both optical and optoelectronic techniques have been used to process packet routing functions based on extremely simple routing protocols. An overview of the design issues for all-optical photonic packet switching is given and contrasted with electronic packet switch implementations. Low-level functions that have been experimentally implemented include routing, contention resolution, synchronization, and header regeneration. System level demonstrations, including centralized photonic switching and distributed all-optical multihop networks, will be reviewed     

ACT3: a high-speed, high-precision electrical impedance tomograph

Presents the design, implementation, and performance of Rensselaer's third-generation adaptive current tomograph, ACT3. This system uses 32 current sources and 32 phase-sensitive voltmeters to make a 32-electrode system that is capable of applying arbitrary spatial patterns of current. The instrumentation provides 16 b precision on both the current values and the real and reactive voltage readings and can collect the data for a single image in 133 ms. Additionally, the instrument is able to automatically calibrate its voltmeters and current sources and adjust the current source output impedance under computer control. The major system components are discussed in detail and performance results are given. Images obtained using stationary agar targets and a moving pendulum in a phantom as well as in vivo resistivity profiles showing human respiration are shown     

Calculation of shift of avalanche transit time phase delay due tooptically injected carriers in indium phosphide avalanche diodes

A computer method for the calculation of the phase shift due to optically injected carriers in an InP avalanche transit time diode has been suggested using the numerically simulated negative resistance profiles in the depletion layer of the diode. The results show that the phase shift due to hole injection is larger than that due to electron injection which explains the pronounced effect of photogenerated hole leakage current in modulating the microwave properties of InP diodes     

Modified FSS response from two sided and closely coupled arrays

A demonstration is presented of a way in which an affected FSS response can be achieved using a two sided structure of dipole arrays sharing the same dielectric layer. Even with these simple elements the results produced resonances well below the grating lobe region, and consequently the instability of these with oblique angles of incidence (up to 75°) was less than 1%. The key to this work was the high coupling between the arrays that was achieved by a relative displacement     

Personal communications networks bridging the gap between cellularand cordless phones

Today's cellular radiotelephone systems currently serve some 12 million subscribers but at average costs of $70/month for service, cellular remains a business, not a consumer, service. On the other hand, cordless phones are already a consumer product in over 40% of US households and annual sales of new cordless phones are already greater than sales of regular corded phones. Personal Communications Networks (PCN) providing Personal Communications Services (PCS) are designed to bridge the gap between expensive public cellular and private cordless services. In this paper we explore PCN/PCS topics including: a definition of the service, identification of the underlying technologies, and discussion of tradeoffs between the technologies     

Optimal discrimination and classification of neuronal actionpotential waveforms from multiunit, multichannel recordings usingsoftware-based linear filters

Describes advanced protocols for the discrimination and classification of neuronal spike waveforms within multichannel electrophysiological recordings. The programs are capable of detecting and classifying the spikes from multiple, simultaneously active neurons, even in situations where there is a high degree of spike waveform superposition on the recording channels. The protocols are based on the derivation of an optimal linear filter for each individual neuron. Each filter is tuned to selectively respond to the spike waveform generated by the corresponding neuron, and to attenuate noise and the spike waveforms from all other neurons. The protocol is essentially an extension of earlier work (S. Andreassen et al., 1979; W.M. Roberts and D.K. Hartline, 1975; R.B. Stein et al., 1979). However, the protocols extend the power and utility of the original implementations in two significant respects. First, a general single-pass automatic template estimation algorithm was derived and implemented. Second, the filters were implemented within a software environment providing a greatly enhanced functional organization and user interface. The utility of the analysis approach was demonstrated on samples of multiunit electrophysiological recordings from the cricket abdominal nerve cord