Protein‐Directed Synthesis of Mn‐Doped ZnS Quantum Dots: A Dual‐Channel Biosensor for Two Proteins

Proteins typically have nanoscale dimensions and multiple binding sites with inorganic ions, which facilitates the templated synthesis of nanoparticles to yield nanoparticle–protein hybrids with tailored functionality, water solubility, and tunable frameworks with well‐defined structure. In this work, we report a protein‐templated synthesis of Mn‐doped ZnS quantum dots (QDs) by exploring bovine serum albumin (BSA) as the template. The obtained Mn‐doped ZnS QDs give phosphorescence emission centered at 590 nm, with a decay time of about 1.9 ms. A dual‐channel sensing system for two different proteins was developed through integration of the optical responses (phosphorescence emission and resonant light scattering (RLS)) of Mn‐doped ZnS QDs and recognition of them by surface BSA phosphorescent sensing of trypsin and RLS sensing of lysozyme. Trypsin can digest BSA and remove BSA from the surface of Mn‐doped ZnS QDs, thus quenching the phosphorescence of QDs, whereas lysozyme can assemble with BSA to lead to aggregation of QDs and enhanced RLS intensity. The detection limits for trypsin and lysozyme were 40 and 3 nM , respectively. The selectivity of the respective channel for trypsin and lysozyme was evaluated with a series of other proteins. Unlike other protein sensors based on nanobioconjugates, the proposed dual‐channel sensor employs only one type of QDs but can detect two different proteins. Further, we found the RLS of QDs can also be useful for studying the BSA–lysozyme binding stoichiometry, which has not been reported in the literature. These successful biosensor applications clearly demonstrate that BSA not only serves as a template for growth of Mn‐doped ZnS QDs, but also impacts the QDs for selective recognition of analyte proteins.     

Thermodynamic and Structural Trends in Hexavalent Actinyl Cations: Complexation of Dipicolinic Acid with NpO22+ and PuO22+ in Comparison with UO22+

The complexation of NpO₂²⁺ and PuO₂²⁺ with dipicolinic acid (DPA) has been investigated in 0.1 M NaClO₄ by spectrophotometry, microcalorimetry, and single crystal diffractometry. Formation of 1:1 and 1:2 (metal/ligand molar ratio) complexes of DPA with NpO₂²⁺ and PuO₂²⁺ were identified and the thermodynamic parameters were determined and compared with those of UO₂²⁺. All three hexavalent actinyl cations form strong 1:1 DPA complexes with slightly decreasing but comparable stability constants from UO₂²⁺ to PuO₂²⁺, whereas the stability constants of the 1:2 complexes (log β₂) decrease substantially along the series (16.3 for UO₂L₂^2?, 15.17 for NpO₂L₂^2?, and 14.17 for PuO₂L₂^2? at 25 °C). The enthalpies of complexation for the 1:2 complexes become less exothermic from UO₂L₂^2? (?28.9 kJ mol^?1), through NpO₂L₂^2? (?27.2 kJ mol^?1), and to PuO₂L₂^2? (?22.7 kJ mol^?1). The trends in the thermodynamic parameters are discussed in terms of the effective charge of the cations and the steric constraints in the structures of the complexes. In addition, the features of the absorption spectra, including the wavelength and intensity of the absorption bands, are related to the perturbation of the ligand field and the symmetry of the actinyl complexes.     

Mechanism and Cellular Kinetic Studies of the Enhancement of Antioxidant Activity by Using Surface‐Functionalized Gold Nanoparticles

The enhanced antioxidant activity of surface‐functionalized gold nanoparticles (AuNPs) synthesized by self‐assembly has attracted great attention, but little is known about the mechanism behind the enhanced activity. To address this challenge, the antioxidant activity of Au@PEG3SA (i.e., surface‐functionalization of spherical AuNPs with the antioxidant salvianic acid A) was used as an example to illustrate the mechanism of the enhanced activity. Evaluation of the antioxidant activity was performed in a radical‐scavenging reaction between Au@PEG3SA and 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH) radical. As expected, the rate constant for the reaction of Au@PEG3SA with DPPH was about nine times greater than that for the salvianic acid A monomer. A comparative analysis of the spectral characteristics of Au@PEG3SA and the salvianic acid A monomer further imply that the enhancement of the antioxidative reaction kinetics may be ascribed to the variation in the transition state for the DPPH‐radical scavenging reaction through π–π stacking interactions between and among adjacent groups on the surface of Au@PEG3SA. On the other hand, the kinetic enhancement of Au@PEG3SA on reactive‐oxygen‐species (ROS) scavenging can be observed in living cells and in vivo, which possibly provides new insight for the bioapplication of self‐assembly of surface‐functionalized AuNPs.     

纳米层状双金属氢氧化物改性PU/PMMA的制备及其弛豫行为

采用原位聚合法,制备了聚氨酯(PU)/聚甲基丙烯酸甲酯(PMMA)/层状双金属氢氧化物(LDH)纳米复合体系(PU/PMMA/LDH).通过广角X射线衍射(WXRD)、透射电子显微镜(TEM)对其结构和形貌进行了表征,并通过热失重(TGA)、动态力学分析(DMA)和宽频介电谱(BDRS)研究了LDH含量(φ)对PU/PMMA体系热稳定性和弛豫行为的影响.结果表明,当φ<1 wt%时,LDH在聚合物基体中以剥离结构为主,PU/PMMA/LDH体系的玻璃化温度(Tg)降低,最大损耗因子(tanδmax)增大;而当φ>1 wt%时,LDH在聚合物基体中以插层结构为主,插层结构对聚合物分子链的限制使复合体系的Tg升高、tanδmax降低.LDH表面与PU硬段间的氢键作用,使复合体系的α介电弛豫转变随φ增加而向高温方向移动,弛豫过程激活参数增大.     

TinO2和TinO2-(n=1-10)团簇的几何结构、电子和磁性质

基于密度泛函理论(DFT)的B3LYP方法,研究了TinO2和TinO2-(n=1-10)团簇的几何结构、电子结构以及磁性.结果表明,两个氧以分离的原子状态吸附在金属团簇的表面,呈现出以一个钛原子为中心的O-Ti-O的相邻吸附形式.中性团簇和阴离子团簇的能量最低结构相似.稳定性分析表明TinO2具有很高的稳定性,特别是TiO2和Ti7O2.此外,详细讨论了团簇的电离势、电子亲和能、电子解离能和能隙.基于最低能量结构,讨论了团簇的磁性,发现电荷从Ti原子向O原子转移,并且电荷转移主要发生在TinO2的Ti-3d、Ti-4s和O-2p轨道.磁性团簇中反铁磁序占据主导,磁矩主要来源Ti-3d电子的贡献,而两个氧原子的贡献非常小.     

镁电解槽中制备镁稀土合金的电解工艺及机制研究

在模拟镁电解槽中,采用电解法制备出稀土含量<10%的镁稀土合金;研究了熔盐中RECl3和CaCl2的含量、电解温度和阴极电流密度对合金中RE含量和电流效率的影响。并采用循环伏安实验和还原实验研究电解制备镁稀土合金的机制。研究结果表明,电解制备镁稀土合金最佳的工艺条件为:熔盐中RECl3和CaCl2的含量分别为3%和10%(质量分数),电解温度为948 K,阴极电流密度约为8 A.cm-2。其电解过程机制为:阴极上只电解出金属镁,而后金属镁把稀土元素还原出来,形成镁稀土合金。     

稀土元素在含残余砷、锡09Cr2AlMoRE钢中的作用

对加稀土前后09Cr2AlMoRE钢取样分析化学成分,制备金相样用SEM-EDS研究了钢中析出物特征,制备透射电镜(TEM)试样通过TEM研究元素的晶界偏聚,并用热力学计算了稀土Ce,La,S和残余元素As反应固定残余元素As的可能性。研究结果表明:在低氧、硫的条件下,稀土镧可以和09Cr2AlMoRE钢中较低含量的砷(130×10-6)作用生成镧砷金属间化合物;铈、镧主要是通过形成稀土砷硫夹杂物固定钢中残余元素砷。另外,在本实验条件下稀土元素(64×10-6)只有很微量的偏聚在晶界,残余元素As不在晶界偏聚。     

3D打印技术制备生物医用高分子材料的研究进展

3D打印技术能够根据不同患者需要,快速精确制备适合不同患者的个性化生物医用高分子材料,并能同时对材料的微观结构进行精确控制.因此,这种新兴的医用高分子材料制备技术在未来生物医学应用(尤其是组织工程应用)中具有独特的优势.近年来,对于3D打印技术制备生物医用高分子材料的研究开发受到了越来越多的关注.不同的生物相容高分子原料被应用于3D打印技术,而这些3D成型高分子材料被用于体外细胞培养,或动物模型的软组织或硬组织修复中.本文主要介绍了近年来3D打印技术在生物医用高分子材料制备中的研究进展,并对该领域的未来应用和挑战进行了展望.     

新一代运载火箭时序仿真系统信号完整性分析

新一代运载火箭时序仿真系统具有数字电路速度快、集成度高的特点,系统要求发出多路高精度时序、时串信号以满足新一代运载火箭地面测试设备的检查与校准需求,因此信号完整性问题在系统设计中不容忽视。针对仿真系统的典型模块(USB 3.0 Super-speed差分线、FPGA外设数据走线、时钟走线)进行建模分析仿真得出PCB硬件电路设计参数,给出时序仿真系统设计信号完整性问题的抑制和解决方法,优化了板级信号质量,改善系统可靠性、工作连续性和输出精度,可有效提高新一代运载火箭测试效率和测试可靠性。     

一种新型多功能信号源系统的设计

为适应航天领域遥测外系统的快速发展,提出了一种新型多功能信号源系统的设计。系统以FPGA为逻辑控制单元,采用PCI总线接口实现了与上位机的通信,同时结合AD5628、AQY210及RS422接口芯片稳定地输出了多路模拟信号、开关信号及一路PCM信号。重点阐述了信号源系统硬件及软件设计中的关键技术。试验结果表明,该系统能够提供多种高精度、高可靠性的信号,且工作性能稳定,抗干扰能力强,数据传输速率达到40Mbps,PCM码率高达983.04kbps,满足了系统设计的要求。