Implications of Nitrogen Doping on Geometrical and Electronic Structure of the Fullerene Dimers

Because of its unsaturated bonds, C₆₀ is susceptible to polymerize into dimers. The implications of nitrogen doping on the geometrical and electronic structure of C₆₀ dimers have been ambiguous for years. A quarter‐century after the discovery of azafullerene dimer (C₅₉N)₂, we reported its single crystallographic structure in 2019. Herein, the unambiguous crystal structure information of (C₅₉N)₂ is elucidated specifically, revealing that the inter‐cage C—C single bond length of (C₅₉N)₂ is comparable with that of an ordinary C(sp³)‐C(sp³) single bond, and that the most stable conformer of (C₅₉N)₂ is gauche‐conformer with a dihedral angle of 66°. To amend the structural deviations, geometrical structure of (C₅₉N)₂ is optimized by a B3LYP‐D3BJ function, which is proved to be more consistent with its single crystal structure than those by the commonly used B3LYP function. Moreover, the calculation method is also suitable for other representative fullerene dimers, such as (C₆₀)₂ and its divalent anion. Additionally, the dissociation of (C₅₉N)₂ at 473 K under mass spectrometric conditions suggests the inter‐cage C—C bond is relatively weaker than an ordinary C—C single bond, which can be explained by the interaction energies of inter‐cages.     

Contradictory effect of gold nanoparticle-decorated molybdenum sulfide nanocomposites on amyloid-β-40 aggregation

The effect of gold nanoparticle-decorated molybdenum sulfide (AuNP-MoS₂) nanocomposites on amyloid-β-40 (Aβ₄₀) aggregation was investigated. The interesting discovery was that the effect of AuNP-MoS₂ nanocomposites on Aβ₄₀ aggregation was contradictory. Low concentration of AuNP-MoS₂ nanocomposites could enhance the nucleus formation of Aβ₄₀ peptides and accelerate Aβ₄₀ fibrils aggregation. However, although high concentration of AuNP-MoS₂ nanocomposites could enhance the nucleus formation of Aβ₄₀ peptides, it eventually inhibited Aβ₄₀ aggregation process. It might be attributed to the interaction between AuNP-MoS₂ nanocomposites and Aβ₄₀ peptides. For low concentration of AuNP-MoS₂ nanocomposites, it was acted as nuclei, resulting in the acceleration of the nucleation process. However, the structural flexibility of Aβ₄₀ peptides was limited as the concentration of AuNP-MoS₂ nanocomposites was increased, resulting in the inhibition of Aβ₄₀ aggregation. These findings suggested that AuNP-MoS₂ nanocomposites might have a great potential to design new multifunctional material for future treatment of amyloid-related diseases.     

Oxidation of aromatic sulfides with molecular oxygen: Controllable synthesis of sulfoxides or sulfones

The recent development of selective oxidation of aromatic sulfides with molecular oxygen was highlighted. The sulfoxides and sulfones could be obtained by simply switching the reaction media, i.e., bis(2-butoxyethyl)ether (BBE) or poly(ethylene glycol)dimethyl ether (PEGDME). The application of the high-boiling-point polyether as an initiator and green media can eliminate the need of large quantities of additives and volatile solvents. This strategy represents an economic and eco-friendly method that could find potential applications.     

Morphology controllable conjugated network polymers based on AIE-active building block for TNP detection

Luminescent conjugated network polymer is one of the most promising chemo-sensors owing to their good chemical/optical stability and multiple functionalization.Herein,three conjugated network polymers were prepared by using aggregation-induced emission active 1,1,2,2-tetrakis(4-formyl-(1,1'-biphenyl))-ethane(TFBE) unit as monomer and hydrazine as linker.Through regulating the synthetical condition,the polyme ric network can form either unifo rm two-dimensional azine-linked nanosheets(ANS),conjugated microporous polymers(A-CMP) or covalent organic frameworks(A-COF).All of these polymers exhibited good stability and high fluorescence quantum efficiency with the quantum yield of6.31% for A-NS,5.26% for A-CMP,and 5.80% for A-COF,as well as fast and selective fluorescence quenching response to 2,4,6-trinitrophenol(TNP).And the best TNP sensing performance with the Stern-Volmer constants(K_(sv)) values up to 8 × 10~5 L/mol and a detection limit of 0.09 μmol/L was obtained for A-NS.The study explores various strategies to construct conjugated polymers with different nanoarchitectures based on the same building block for sensitive detection of explosives.     

溶液法生长大面积超薄钙钛矿单晶薄膜

卤化物钙钛矿由于其独特的光电性质,在薄膜光电子器件领域具有极大潜力1。虽然许多工作都集中在多晶钙钛矿材料上,但单晶钙钛矿比多晶具有更低的缺陷态密度、更好的载流子输运能力和更高的稳定性2,3,可以有有效减少甚至消除载流子输运过程中的散射损失以及在晶界处的非辐射性复合4。采用单晶钙钛矿薄膜作为器件活性层被认为是进一步提高钙钛矿光电子器件性能的理想方案。目前,研究报道的钙钛矿单晶薄膜生长方法主要通过化学气相沉积和溶液空间限制法5,6,然而,所制备的薄膜厚度往往较厚,相应的器件性能也没有多晶薄膜的器件高7,因此,生长高质量的超薄大面积钙钛矿单晶薄膜至关重要。     

双功能改性的T型分子筛膜用于有机溶剂脱水

将3-氨丙基三乙氧基硅烷（APTES）引入到T型分子筛膜表面,用以修饰多晶膜合成过程中产生的缺陷。X射线衍射、场发射扫描电子显微镜、X射线光电子能谱和FT-IR等方法的表征结果显示,APTES通过“键合”的形式被成功地修饰到膜表面上。APTES层起到2个作用：一是提高膜的亲水性;二是减少膜层的缺陷。将修饰后的膜应用在348 K、90%的异丙醇水溶液的脱水时,该膜表现出比较高的分离因子和通量。该方法重复性良好,5个修饰后的膜样品的选择性平均增加了大约8倍（从359±23增加到2 934±183）,而渗透通量仅仅从（3.52±0.10） kg·m^-2·h^-1降低到（3.06±0.14） kg·m^-2·h^-1（减少13.07%）。在363 K下,修饰的膜经过100 h的连续测试,膜渗透测得的水含量均可达到99.50%以上,表明修饰后的膜性能较稳定。     

Catalytic transfer hydrogenation of biomass-derived furfural to furfuryl alcohol with formic acid as hydrogen donor over CuCs-MCM catalyst

Catalytic transfer hydroge nation(CTH) of furfural(FF) to furfu ryl alcohol(FFA) has received great intere st in recent years.He rein,Cu-Cs bimetallic supported catalyst,CuCs(2)-MCM,was developed for the CTH of FF to FFA using formic as hydrogen donor.CuCs(2)-MCM achieved a 99.6% FFA yield at an optimized reaction conditions of 170℃,1 h.Cu species in CuCs(2)-MCM had dual functions in catalytically decomposing formic acid to generate hydrogen and hydrogenating FF to FFA.The doping of Cs made the size of Cu particles smaller and improved the dispersion of the Cu active sites.Impo rtantly,the Cs species played a favorable role in enhancing the hydrogenation activity as a promoter by adjusting the surface acidity of Cu species to an appropriate level.Correlation analysis showed that surface acidity is the primary factor to affect the catalytic activity of CuCs(2)-MCM.     

Site-Specific Detection of Free Radicals in Membranes Using an Amphiphilic Spin Trap

The detection of free radicals and related species has attracted considerable attention in recent years due to their critical roles in physiological and pathological processes. Among the various methods for the detection of free radicals, electron spin resonance coupled with spin-trapping technique has been an effective approach for the characterization and quantification of free radicals due to its high specificity. In this study, we designed and synthesized a novel amphiphilic spin trap, 2-(diethoxyphosphoryl)-2-heptadecanyl-3,4-dihydro-2H-pyrrole-1-oxide (DEPHdPO), from 5-(diethoxyphosphoryl)-5-methyl-1-pyrroline-N-oxide with a long hydrocarbon chain at the C-5 position of the pyrroline ring, providing the amphiphilic character. The free-radical-trapping ability of DEPHdPO was evaluated by capturing hydroxyl radicals (^·OH), superoxide anions (\( {\text{O}}_{2}^{ \cdot - } \)), and carbon-centered free radicals in a model membrane prepared from sodium dodecyl sulfate (SDS). The results indicate that the hydrophobic hydrocarbon chain of DEPHdPO can be inserted into the inner core of SDS micelles, and the hydrophilic nitronyl functional moiety is located on the surface layer. Thus, various free radicals, including ^·OH radicals, \( {\text{O}}_{2}^{ \cdot - } \) anions, and carbon-centered radicals could be site-specifically detected near the membrane surface. Moreover, DEPHdPO could be successfully located on the surface of thylakoid membranes, and the nearby photo-initiated \( {\text{O}}_{2}^{ \cdot - } \) anions could be trapped site-specifically.