Facile electrochemical synthesis of a conducting copolymer from 5-aminoindole and EDOT and its use as Pt catalyst support for formic acid electrooxidation

5-Aminoindole and 3,4-ethylenedioxythiophene (EDOT) were copolymerized electrochemically on a carbon cloth (CC) electrode in an aqueous sulfuric acid solution. The as-prepared copolymer was characterized by cyclic voltammogram, SEM, and UV-vis and FT-IR spectra through which the electrochemical properties, structure, and composition of the as-obtained copolymer were determined. The electrochemical activity and stability of the as-formed copolymer are significantly improved in comparison with poly(5-aminoindole) due to the incorporation of EDOT units into the conjugated chain. The copolymer film-modified CC electrode was used as substrate for Pt particle deposition (denoted as Pt/copolymer/CC), and then, its catalytic activity towards formic acid electrooxidation was studied. Experimental results indicate that the catalytic activity of Pt/copolymer/CC towards formic acid electrooxidation is enhanced in comparison with that of Pt/homopolymer/CC, which can be attributed to the homogeneous distribution of Pt nanoparticles on the copolymer/CC substrate and the improved electrochemical activity of the copolymer film.     

Improved electrochemical performance of nano-crystalline Li2FeSiO4/C cathode material prepared by the optimization of sintering temperature

Li₂FeSiO₄/C cathode materials have been prepared using the conventional solid-state method by varying the sintering temperature (650 °C, 700 °C and 750 °C), and the structure and electrochemical performance of Li₂FeSiO₄/C materials are investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), galvanostatic charge–discharge tests, respectively. The results show that Li₂FeSiO₄ nano-crystals with a diameter of about 6–8 nm are inbedded in the amorphous carbon, and the Li₂FeSiO₄/C material obtained at 700 °C exhibits an initial discharge capacity of 195 mA?h g^?1 at 1/16 C in the potential range of 1.5–4.8 V. The excellent electrochemical performance of Li₂FeSiO₄/C attributes to the improvement of conductivity and reduction of impurity by the optimization of the sintering temperature.     

Design and Synthesis of Tri-substituted Chiral Pyrrolidin-2-one Derivatives as CCR4 Antagonists

A series of tri-substituted chiral pyrrolidin-2-one derivatives have been designed and synthesized as CC chemokine receptor 4 （CCR4） antagonists. The structure of CCR4 was built by homology modeling. Asymmetric synthesis was applied to synthesize the R,R configuration chiral pyrrolidin-2-one scaffold. The stereoisomeric con- figurations of the compounds were identified by 2D I H-~H COSY spectroscopy and 1D NOESY spectroscopy. This method was more economical and convenient than traditional X-ray single crystal diffraction. In addition, the inter- actions between these compounds and the N-terminal extracellular tail of CCR4 were studied using capillary zone electrophoresis. The CCR4 chemotaxis inhibition effect was tested in CCR4-transfected HEK293 cells. Several compounds showed potent activities as CCR4 antagonists. Among these compounds, lc is the most active one. Its apparent binding constant of CZE experiment result is （1.569±0.11）× 10s L·mol ^-1, and its percentage inhibition of the HEK293/CCR4 cells migration with the concentration of I gmol·L ^-1 in DMSO is 59%. And compound If has slightly higher affinity to N-terminal of CCR4 according to its apparent binding constant than lb because of the in- troduced ester linkage. Further studies on the mechanism of these compounds are in progress.     

Synthesis, Characterization and Properties of Novel Star-Shaped π-Conjugated Oligomers with Triphenylamine Core

Four new star‐shaped π‐conjugated oligomers ( TPA‐CZ3 , TPA‐TPA3 , TPA‐PTZ3 and TPA‐BT3 ) with triphenylamine as a core and different electron‐donating ability groups, carbazole, triphenylamine, phenothiazine and bithiophene, as peripheral units have been designed and synthesized via the Heck reaction. These oligomers show good solubility in common organic solvents. Their photophysical, electrochemical, electronic structure and charge transfer properties between these star‐shaped π‐conjugated oligomers and N,N′‐bis(1‐ethylpropyl)‐3,4:9,10‐perylene bis(tetracarboxyl diimide) (EP‐PDI) have been investigated by UV‐vis absorption spectra, photoluminescence (PL) spectra, cyclic voltammetry (CV) measurement, theoretical calculations and fluorescence quenching. The results show that the absorptions and fluorescences of TPA‐CZ3 , TPA‐TPA3 and TPA‐PTZ3 are red shifted with the electron‐donating ability of the peripheral unit increasing from carbazole to triphenylamine and phenothiazine. In addition, although the bithiophene group has a weaker electron‐donating ability than carbazole, triphenylamine and phenothiazine, the absorption and fluorescence of TPA‐BT3 have a red shift than those of TPA‐CZ3 , TPA‐TPA3 and TPA‐PTZ3 because TPA‐BT3 has a longer conjugation length than TPA‐CZ3 , TPA‐TPA3 and TPA‐PTZ3 . The triphenylamine core and the peripheral units can constitute a large conjugated structure. The fluorescence quenching properties indicate that efficient charge transfer can happen between the star‐shaped oligomers and EP‐PDI.     

Quick estimation of the Dpb for predicting the strength of chemical bond in situ

An approximate method has been established to calculate the depth of the potential acting on an electron in a molecule at the saddle point along a chemical bond, denoted by Dpb. It is a new indicator which can be used for predicting the strength of a chemical bond. In this work, as a practical application for demonstrating thismethod, we calculated the Dpb of deoxyribonucleosides and ribonucleosides along all C-H and N-H chemical bonds using the method. The results are in fair agreement with those results of previously reported experimental and theoretical observations.     

One inorganic-organic hybrid derived from reduced molybdophosphate and trinuclear cadmium(Ⅱ) fragment

One new polyoxometalate (POM)-based inorganic-organic hybrid [Cd3Ⅱ(HPO4)(Hbpp)(H2O)2]{CdⅡ[P4- Mo6O28H3.5(OH)3]2} (H4tpb)·7H2O (1) (bpp = 1,3-bis-(4-pyridyl)propane, tpb = 1,2,4,5-tetra(4-pyridyl)-benzene) constructed from reduced molybdophosphate [P4Mo6O28H3.5(OH)3]5.5- (P4Mo6), trinuclear CdⅡ-phosphate-Hbpp fragment and protonated tpb has been hydrothermally synthesized and structurally characterized by IR, elemental analyses and single crystal X-ray diffraction. The complex 1 crystallizes in the monoclinic system with the space group P21/c and cell parameters of a = 15.672(12)Å, b = 23.839(19)Å, c = 27.654(2)Å, β = 115.850(10)8, V = 9297.9(12) Å3, Z = 4, R1 = 0.0534 and wR2 = 0.1135. In complex 1, the P4Mo6 units are bridged by CdⅡ ions to form the classic sandwich-type [Cd(P4Mo6)2] dimers, which are further connected into a two dimensional network via the trinuclear CdⅡ subunits. The tpb is synthesized in situ from the bpp ligands and connects the adjacent 2D layers into a 3D supramolecular framework through hydrogen bonding interactions. The electrochemical and fluorescent properties of complex 1 have been investigated.     

Br-掺杂Bi2WO6的水热法合成及其可见光催化性能

以Bi（NO₃）₃·5H₂O和Na₂WO₄·2H₂O为主要原料,采用水热法合成了纯相Bi₂WO₆,并对其进行非金属离子Br^-掺杂改性。采用XRD、SEM、TEM、XPS、Raman、PL和DRS研究了Br^-掺杂对Bi₂WO₆的物相结构、形貌和可见光催化性能的影响。结果表明,Br^-掺杂可有效提高Bi₂WO₆的可见光催化性能,当掺杂量（物质的量百分数）为8%时,溴掺杂Bi₂WO₆的光催化性能最好,可见光照射40 min后,可降解96.73%的罗丹明-B,与未掺杂Bi₂WO₆相比,其降解率提高了36.32%。     

氢化物发生-原子荧光光谱法同时测定水中砷和锑

建立在硝酸介质中用氢化物发生-原子荧光光谱法同时测定水中砷和锑的方法。优化了仪器工作条件、酸度、硼氢化钾及还原剂浓度。砷、锑的线性范围为0～10．0μg／L;检出限分别为0．02,0．01μg／L;测定结果的相对标准偏差分别为1．77％～3．72％,2．95％～4．87％（n=6）;加标回收率分别为98％106％,96％105％。该法操作简便,灵敏度高,快速,便于推广,适用于水中砷和锑的同时测定。     

中药柴胡总皂苷急性肝毒性的代谢组学研究

运用UPLC-MS联用技术对空白对照组、柴胡总皂苷(SS)组大鼠在给药后第3天和第5天的尿液样本进行分析检测,获得了以质荷比和保留时间为变量的矩阵数据。据此建立各组大鼠的尿液代谢轮廓图,并利用主成分分析(PCA)建立了SS的代谢组学毒性模型。结合肝组织病理,探讨了柴胡总皂苷的急性肝毒性。对于SS组与正常组,大鼠尿液代谢轮廓图表现出了一定的差异。在代谢组学毒性模型中,给药第3天和第5天的PCA分类均偏离正常组,而第5天的偏离程度强于第3天。同时,在第5天的肝组织病理切片中发现了组织病变。由此表明,给药组大鼠的代谢组偏离了正常组,这种偏离正是肝急性毒性的表现,且给药到第5天的肝毒性强于第3天,表明肝毒性与给药累积剂量呈正相关,表现出了明显的急性和累积肝毒性。