微观结构对膜换湿能力影响研究

对多孔膜换湿过程进行了理论分析,得到了透湿量和湿阻的计算式.同时对三种膜包括PVDF,PES和纤维素膜进行了湿阻的测量实验,通过对实验数据的回归处理,得到了多孔膜的结构参数.结果表明,膜厚、孔径分布、孔隙率及曲折因子对膜的换湿特性都有较大影响,在平均孔径相同的情况下,其它因素仍然导致了不同膜换湿能力的较大差距。在所获得的结构参数基础上,通过数值模拟的方法研究了平均孔径对膜换湿能力的影响。结果表明湿阻随平均孔径的增大而减小,减小趋势逐渐平缓最后趋向一定值。     

胃康灵胶囊中15种元素含量分析

微波消解法制备供试品,电感耦合等离子体-质谱(ICP-MS)法测定中成药胃康灵胶囊中15种元素的含量,探讨其宏量、微量元素与疗效的关系。胃康灵胶囊中常量元素含量丰富,微量元素含量差别较大,Fe含量最多,Se含量最少,有害元素含量不高。胃康灵胶囊中元素与胃炎及胃溃疡的治疗密切相关。     

CoMn@NC催化5-羟甲基糠醛常压氧化为2, 5-呋喃二甲酸二甲酯

2, 5-呋喃二甲酸二甲酯(DMFDCA)这一生物质衍生的增值化学品是石油基聚合物单体对苯二甲酸(TPA)的理想替代品。本研究采用一步共热解法合成了两种廉价金属修饰的氮掺杂多孔碳催化剂CoMn@NC,并将其用于5-羟甲基糠醛(HMF)在温和条件下的需氧氧化。由Co₃Mn₂@NC-800催化HMF在50 ℃和常压氧气的条件下反应12 h后,得到产率为85%的DMFDCA。多孔催化剂的高比表面积提高了传质效率。Co纳米粒子(NPs)和呈原子级分散的Mn与掺杂在碳中的氮配位形成M―N_x。富含吡啶氮的碳基体中的缺电子金属位点有利于HMF和氧的活化。氧形成的超氧自由基阴离子的存在确保了半缩醛中间体和5-(羟基甲基)-2-糠酸甲酯(HMMF)的羟甲基的脱氢氧化,从而高选择性得到DMFDCA。该催化剂性能稳定,可适用于各种取代芳醇。该催化体系具有用于生产聚合物单体羧基酯的应用潜力。     

A Two-Dimensional Semiconductive Metal-Organic Framework for Highly Efficient Microwave Absorption

Advanced microwave absorbing materials(MAMs)are urgently required to eliminate and attenuate microwaves to address the ubiq-uitous microwave radiations and inte...     

High-performance liquid chromatography of cardiolipin

Resolution of freshly prepared and of commercially available (degraded) samples of cardiolipin into 15-30 components has been accomplished by reversed-phase high-performance liquid chromatography using a 3-micron particulate Microsorb C18 column irrigated with linear gradients of acetonitrile--methanol--10 mM phosphate buffer pH 7.4. Selected resolved components were crystallized and characterized by infrared absorption spectra. Saponification of other components and identification of component fatty acids by reversed-phase high-performance liquid chromatography demonstrated the presence of ten fatty acids (14:0, 14:1, 16:0, 16:1, 18:0, 18:1, 18:2, 18:3, 20:0, 20:4), with linoleic acid (18:2) identified in all resolved components. From fatty acid composition data it appears that several resolved fractions consist of single cardiolipin molecular species.     

可待因及福尔可定的密度泛函理论计算模拟和表面增强拉曼光谱测定北大核心CSCD

运用密度泛函理论(DFT)对可待因及福尔可定进行几何构型优化,从而对标准品粉末的拉曼光谱的振动模式进行指认和归属,并与低浓度水平标准溶液的表面增强拉曼谱图进行比较。进一步优化了表面增强拉曼光谱检测条件,并摸索可待因及福尔可定的测定下限及定量分析的可行性。结果表明,可待因及福尔可定大部分特征峰拉曼位移的理论计算值、拉曼光谱测定值、表面增强拉曼光谱测定值是一致的,但会有一定程度的蓝移和红移;可待因、福尔可定的测定下限均为10 mg·L^(-1)。可待因在631.29 cm^(-1)和1 595.26 cm^(-1)处、福尔可定在628.58 cm^(-1)和1 251.41 cm^(-1)处的特征峰强度比值,与其对应的质量浓度(40~100 mg·L^(-1))呈线性关系。对空白基质进行加标回收试验,可待因和福尔可定的回收率分别为99.0%~105%和102%~104%,测定值的相对标准偏差(n=5)分别为5.3%,5.9%。上述方法可为这两种管制药品提供拉曼光谱检测的理论依据和快检支持。     

Design,syntheses and antitumor activities evaluation of 1,5-diaryl substituted pyrazole secnidazole ester derivatives

According to the drug hybridization principle, a series of novel 1,5-diaryl substituted pyrazole secnidazole ester derivatives ( 6aa – 6gc ) have been synthesized by the combinations of various 1,5-diarylpyrazole-3-carboxylic acids with secnidazole. The in vitro antitumor/cytotoxicities activities against tumor and normal cell lines, including NCI-H460 (lung tumor cell), MCG-803 (gastric tumor cell), Skov-3 (ovarian tumor cell), BEL-7404 (liver tumor cell) and HL-7702 (normal liver cell), have been evaluated using MTT assay. All compounds showed promising inhibitory activities against four tumor cell lines. The IC₅₀ of 6bc against the BEL-7404 cell was 2.03 μM, and those of 6fc against the NCI-H460, MCG-803 and Skov-3 were 1.34, 0.14, and 0.87 μM, respectively. All these values were much lower than those of the cisplatin. Furthermore, 6fc and 6bc were also verified to be considerably safe for normal human liver cell, since the lower IC₅₀ values than cisplatin. Based on these results, the cell cycle analysis, apoptosis ratio detection and mitochondrial membrane potential assay of 6fc and 6bc were further performed aiming to investigate their inhibition mechanism of BEL-7404 cells. It is revealed that they have effectively inhibited the cell growth by arresting the BEL-7404 cells at S phase and induced apoptosis through the mitochondria-mediated pathway.     

A post curing strategy toward the feasible covalent adaptable networks in polyacrylate latex films

The implementation of covalent adaptable networks (CANs) in general resin system is becoming attractive. In this work, we propose a simple post-curing strategy based on the core-shell structured acrylate latex for the achievement on both the improved general performance and the CANs characteristics in latex films. The building to the CANs was relied on the introduction of 4,4′-diaminophenyl disulfide as the curing agent, which cured the acetoacetoxy decorated shell polymer through the ketoamine reaction. The metathesis reaction of aromatic disulfides in the crosslinking segments enabled the thermally induced dynamic behavior of the network as revealed in the stress relaxation tests by comparison with other diamine crosslinking agents without the incorporation of disulfide. The synergism of the dynamic crosslinking of the shell polymer and static crosslinking in the core polymer contributed to the improved mechanical strength (15 MPa, strain% = 250%) and the suppressed water adsorption (~1% in 24 h of soaking) of the latex film, which exhibited above 90% of recovery in both strength and strain from a cut-off film damage within 1 h at 80°C. Moreover, the cured latex film could be recycled, and 75% of the mechanical performance was regained after three fragmentation-hot-pressing cycles. These, in addition with the feasible and environmental friendly characteristics, suggest a sustainable paradigm toward the smart thermosetting latex polymers.