Synthesis of Fullerene-end Functionalized Poly（methyl methacrylate） via Reverse Atom Transfer Radical Polymerization

The use of the reverse atom transfer radical polymerization （RATRP） to end-functionalize poly（methyl methacrylate） （PMMA） with fullerenes, e.g. C60 and C70 was described in this paper. The Cl-terrninated PMMA was prepared via RATRP with designed molecular weight and narrow molecular weight distributions, and then directly used to react with fullerenes to produce C60（C70） terminated PMMA polymers in the presence of CuBr/Cu/bipy or FeCl2/bipy catalysts. The resultant polymers exhibit good solubility in some common organic solvents, e.g. THF, CHCl3 and toluene, and were well structurally characterized by a variety of physical techniques.     

Prediction of retention indexes. I. Structure-retention index relationship on apolar columns

A simple method is reported for predicting the retention index (RI) of a chemical compound from the number of carbon and carbon equivalent atoms in the molecule, the RI increment for atom addition and the group retention factors (GRFs) for substituents and functional groups. Atoms other than carbon such as oxygen, nitrogen, sulfur, chlorine, bromine and iodine are assigned carbon atom equivalency of approximately 1, 1, 2, 2, 3 and 4, respectively and are counted for their contribution towards RI prediction. The GRFs of substituents and functional groups are derived from the RIs of reference compounds and series of homologues. Ring structures, ring fusion, ring connection, iso- and neo-carbons, chain branching and unsaturation are also assigned GRFs. The predicted RIs of a number of alicyclic, aliphatic and aromatic hydrocarbons, primary, secondary and tertiary alcohols, phenols, aliphatic amines, aromatic amines, heterocyclics, carboxylic acids, acid esters, aldehydes, ketones, and halogenated compounds, are found to be within +/- 3% of the observed values. The structure-retention index relationship thus developed is extremely useful in the tentative identification of radioactive side products formed in tritium labeling by radiation-induced methods.     

纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.     

Fluorinated poly(arylene ether ketone)s bearing pentafluorostyrene moieties prepared by a modified polycondensation

The polycondensation of decafluorobenzophenone with hexafluorobisphenol A was modified by the addition of a molecular sieve dehydrating apparatus to the refluxing reaction system. This modification promoted the polymerization and enabled the reactions to be conducted in milder conditions and completed in a shorter time, thereby depressing side reactions such as branching and crosslinking. The resulting fluorinated poly(arylene ether ketone)s (FPAEK) were free of gel particles and possessed the designed molecular weights. This modified procedure was also suitable for introducing crosslinkable pentafluorostyrene (FSt) moieties into the polymers at the chain ends and/or inside the chain with the vinyl group of FSt being pendant. The resulting FSt containing fluorinated poly(arylene ether ketone)s (FPAEK‐FSt) can then be thermally crosslinked at 100 °C in the presence of 1% benzoyl peroxide (BPO) or at 250 °C without any initiator. The glass‐transition temperatures (T_g's) of FPAEK increased with increasing molecular weight and leveled off at about 147 °C for the polymer with a number‐average molecular weight of 18,600 Da, whereas the values were not apparently affected by the addition of FSt units. However, crosslinking of the FPAEK‐FSt resulted in an approximate 30 °C increase of the T_g. Spin‐coating FPAEK‐FSt onto silicon wafers followed by crosslinking gave films with excellent thermal stability, physical strength, and adhesion to the substrate as well as good reproducibility in terms of film preparation and optical properties. The refractive index and birefringence of the films measured at a wavelength of 1.55 μm were 1.502 and 2.5 × 10^?3, respectively. © 2002 Government of Canada. Exclusive worldwide publication rights in the article have been transferred to Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4205–4216, 2002     

铕掺杂BaPbO3的EXAFS研究

采用扩展Ｘ射线吸收精细结构方法，研究了铕掺杂ＢａＰｂＯ３多晶粉末中Ｅｕ，Ｐｂ两种原子的近邻结构。Ｅｕ的掺杂，导致八面体中金属Ｐｇ，Ｅｕ的配位数降低。     

Synthesis and antiplatelet activities of N-arylmethyl-3,4-dimethylpyrano[2,3-c]pyrazol-6-one derivatives.

A series of new 1- and 2-arylmethyl-3,4-dimethylpyrano[2,3-c]pyrazol-6-one derivatives were synthesized and examined for their antiplatelet activities. Some of these compounds showed significant inhibitory activities. Among them, 1-phenylmethyl-3,4-dimethylpyrano[2,3-c]pyrazol-6(1H)-one (4a), 2-(2'-methoxyphenyl)methyl-3,4-dimethylpyrano[2,3-c]pyrazol-6(2H)- one (3e) and 2-(3'-methoxyphenyl)methyl-3,4-dimethylpyrano[2,3-c]pyrazol-6-(2H) - one (3f) were the most effective. These inhibitors acted in a concentration-dependent manner. The antiplatelet effect of compound 3f is due to the inhibition of thromboxane A2 formation and the blockade of thromboxane A2/prostaglandin endoperoxide receptor in washed rabbit platelets.     

Separation and identification of the phthalic anhydride derivatives of Liqusticum Chuanxiong Hort by GC-MS, TLC, HPLC-DAD, and HPLC-MS

A simple, sensitive, and rapid method using gas chromatography (GC)-mass spectrometry (MS) is developed for the simultaneous separation and identification of the active ingredients of Liqusticum Chuanxiong Hort (Chuanxiong). Ten phthalic anhydride derivatives (PADs) are identified in Chuanxiong as 3-butylphthalide, 3-butylidenephthalide, 3-butylidene-4-hydroxyphthalide, senkyunolide A, neocnidilide, Z-ligustilide, E-ligustilide, senkyunolide F, senkyunolide-H, and senkyunolide-I. The existence of ferulic acid and vanillin in Chuanxiong extract is also demonstrated. Further identification of these compounds is performed by thin-layer chromatography, high-performance liquid chromatography (HPLC), and HPLC-MS analysis. This is the first report of the separation and determination of the PADs in Chuanxiong by GC-MS.     

缓慢炭化部分氧化对制备煤质活性炭的影响

研究了炭化升温速度、炭化低温区引入空气部分氧化对活性炭制备过程中炭化阶段、炭化物结构、活性炭性能等的影响。结果表明，炭化时低温部分氧化可提高炭化物得率，使炭化物微晶的ｄ００２值升高和Ｌｃ值减小；而较慢的炭化升温速度有利于制备优质活性炭。缓慢炭化、部分氧化可以在一定程度上控制炭化路径，使炭化向生成取向性差、难石墨化、各向同性、呒定形炭多的炭化物的方向进行；并讨论了它们控制炭化的作用机理。以此为指导，     

Recycling Chiral Organocatalyst （4S）-Phenoxy-（S）-proline for Direct Asymmetric Aldol Reaction in Ionic Liquid （bmim）PF6

Room temperature ionic liquid (bmim)PF6 was evaluated for recycling an organocatalyst (4S)-phenoxy-(S)-proline for direct asymmetric aldol reactions. The desired aldol products were obtained with good yields up to 93.2% and enantioselectivities up to 88.5%, and isolation of the products by simple extraction allowed recycling the ionic liquid containing the immobilized catalyst in subsequent reactions without significant decrease of yields and enantioselectivities.     

High-performance liquid chromatography of cardiolipin

Resolution of freshly prepared and of commercially available (degraded) samples of cardiolipin into 15-30 components has been accomplished by reversed-phase high-performance liquid chromatography using a 3-micron particulate Microsorb C18 column irrigated with linear gradients of acetonitrile--methanol--10 mM phosphate buffer pH 7.4. Selected resolved components were crystallized and characterized by infrared absorption spectra. Saponification of other components and identification of component fatty acids by reversed-phase high-performance liquid chromatography demonstrated the presence of ten fatty acids (14:0, 14:1, 16:0, 16:1, 18:0, 18:1, 18:2, 18:3, 20:0, 20:4), with linoleic acid (18:2) identified in all resolved components. From fatty acid composition data it appears that several resolved fractions consist of single cardiolipin molecular species.