Fabrication of a heterodyne receiver OEIC with optimized integration process using three MOVPE growth steps only

An optimized integration process is reported requiring only three epitaxial growth steps for the fabrication of an OEIC encompassing a single-mode laser, a waveguide element, and fast photodiodes. The process was applied to the fabrication of a heterodyne receiver including a semi-insulating buried heterostructure (SIBH)-DFB-laser with an output power of 14 mW and a side-mode suppression ratio greater than 40 dB, a 3-dB coupler, and high-speed balanced photodiodes with a bandwidth of 9 GHz. The laser can also be used as a transmitter laser exhibiting a modulation bandwidth of 11 GHz.     

A high-current and high-temperature 6H-SiC thyristor

A 6H-SiC thyristor has been fabricated and characterized. A forward breakover voltage close to 100 V and a pulse switched current density of 5200 A/cm² have been demonstrated. The thyristor is shown to operate under pulse gate triggering for turn-on and turn-off, with a rise time of 43 ns and a fall time of less than 100 ns. The forward breakover voltage is found to decrease by only 4% when the operating temperature is increased from room temperature to 300°C. It is found that anode ohmic contact resistance dominates the device forward drop at high current densities     

Labelling 2-D geometric primitives using probabilistic relaxation:reducing the computational requirements

In previous work, an algorithm for matching geometric features was developed. Although the method worked well, it was demanding in computational resources when applied to large problems. The authors now present methods for reducing the computational requirements, without significantly affecting the reliability of the algorithm     

Liquid crystal properties of some substituted pyrazines

A number of biphenyl, terphenyl analogues and ethynes which contain a pyrazine ring have been made and their liquid crystal transition temperatures, together with examples of birefringence measurements, are reported. All the 2,5-disubstituted pyrazine systems are liquid crystalline showing high birefringence values for the biphenyl and terphenyl analogues, whereas the 1,5-disubstituted systems are not liquid crystalline. The pyrazine ethyne systems exhibit very high birefringence values. X-ray diffraction has been used to identify the liquid crystal phases of 2-n-nonyloxy-5-(4'-propylbiphenyl-4-yl)pyrazine.     

Heading towards an advanced signalling system for multimedia,multiparty services in broadband ISDN

Introduction of the broadband integrated services digital network (B-ISDN) will enable network users to make use of advanced multimedia, multiparty services. With this aim in view, RACE II project R2044, MAGIC, is investigating long-term signalling requirements, architecture and protocols for B-ISDN. New service concepts are being developed in MAGIC which will provide more flexibility when compared to narrowband ISDN (N-ISDN). The service requirements and other signalling requirements, such as the separation between call and associated connections at the network-node interface, are used to determine the distribution of functions over the network. The signalling protocols which are used to exchange the signalling information are subsequently developed. These signalling protocols are simulated to prove the performance and the feasibility of call handling concepts     

Scattering from coated targets using a frequency-dependent, surfaceimpedance boundary condition in FDTD

One method for reducing the radar cross section of objects such as aircraft and missiles is the application of a lossy coating. Computing scattering from targets coated with dielectric/magnetic materials is challenging due to the reduced wavelengths of an incident field inside the coating. These smaller wavelengths require finer sampling of the fields. A technique for implementing this calculation without greatly increased memory requirements or computation times has previously been developed using a finite-difference time-domain (FDTD) code which has been tested in one, two, and three dimensions. The method requires knowledge of the frequency behaviour of the complex permittivity and permeability, and the thickness of the dielectric coating and is applicable to thin coatings when one or more reflections from the conducting surface are significant. The impedance at the surface of the coating is computed based on the given information and then approximated using a summation of causal functions. The approximated impedance is Z-transformed and added to the FDTD code in special update equations for the fields at the surface of the coating. No computations are required inside the coatings so the FDTD grid can be sized based on the free-space wavelength. The result obtained is valid over the entire frequency range of interest, assuming that the approximated surface impedance is a good match over the entire range. Comparisons with measurements of a scale model coated missile show good agreement and almost no increase in resource requirements over a standard FDTD calculation for an uncoated metal target     

Dipole radiation in uniaxial bianisotropic medium

Radiation from an electric dipole oriented parallel to the distinguished axis of a uniaxial bianisotropic medium is considered. The electromagnetic fields are represented in full generality in terms of two scalar Hertz potentials. An analytic solution for these scalar potentials is obtained.<>     

Analogue micropowered log-domain tone controller for auditoryprostheses

A micropower tone-control circuit comprising two first-order log-domain filters and a subtractor built with MOS transistors in weak inversion is described. The tone-controller is capable of providing bass cut/boost and treble cut operations. This circuit is being used in new designs of a conventional (acoustic) hearing-aid and cochlear implant     

An image processing IC for backprojection and spatial histogrammingin a pipelined array

The first VLSI digital signal processor that performs both high-precision image backprojection and spatial histogram calculations at raster-scan rates as high as 30 MHz is described. Realized in 1 μm CMOS technology, this 13.3 mm×13.3 mm chip is designed to handle images as large as 1024×1024 12 b pixels. Loadable coefficients and a unified architecture allow this IC to be used with a variety of computed-tomography scanners for image reconstructions, including fan- and parallel-beam reconstruction. This chip also computes the forward Radon transform, which is a spatial histogram, permitting it to be used for iterative reconstruction algorithms. The bit lengths in the fixed-point architecture assure 12 b reconstruction accuracy     

Colour image detection and matching using modified generalisedHough transform

A new approach to 2-dimensional (2D) colour-image detection and matching using a modified version of the generalised Hough transform (GHT) is proposed. In the conventional GHT, the useful colour information existing in the input image and the relationship between each pixel and its neighbourhood are not used. Furthermore, lighting changes in the image are not usually considered. Therefore, the conventional GHT is seldom applied to colour images. In the proposed approach, lighting are removed using normalised colour values. Next, certain critical pixels of an input colour image whose neighbourhoods have larger variances of normalised colour values are extracted. For each critical pixel, a feature vector, which includes the normalised colour values of the pixel as well as those of the pixel's neighbours, is then constructed. A modified voting rule for the GHT is therefore proposed which is based on a similarity-measure function of the feature vectors. High maximum peaks in the cell array are searched finally as the result. The proposed method is robust for colour-image detection and matching in noisy, occlusive, and lighting-change environments, as demonstrated by experimental results