Reliability estimation in a generalized life-model with applicationto the Burr-XII

Estimators of the reliability function in a GLM (generalized life model) are considered. The class of the GLM includes (among others) the Weibull, Pareto, Beta, Gompertz, and Rayleigh distribution. A proper general prior density and the predictive function for general class of distribution proposed by Al-Hussaini(1999) are used to obtain the exact estimate. Also, the Bayes estimates relative to symmetric loss function (quadratic loss), and asymmetric loss function (LINEX loss, and GE loss), are obtained. Comparisons are made between those estimators and the MLE applying to the Burr-XII model using the Bayes approximation due to Lindley. Monte Carlo simulation was used     

在RGB显示器中生成一致的LED亮度

发光二极管（LED）在各种终端设备中已经被广泛使用，从汽车前照灯、交通信号灯、文字显示器、广告牌及大屏幕视频显示器，到普通及建筑照明和LCD背光等最新应用，LED的迅速采用使得最普通的设备也需要重新设计。随着LED效率与亮度的增加以及成本的减少，LED有可能会取代消费类应用中的传统照明技术。本文通过比较采用基于LED的LCD背光的大屏幕显示器中所使用的一些技术，阐述如何解决在使用LED时所面对的一些设计挑战。     

Optimization of control setting and size of shunt capacitors on distribution feeders

Loads on electric utility systems have two components: active power (measured in kilowatts) and reactive power (measured in kilovars). Active power has to be generated at the power plant, whereas reactive power can be provided by either power plants or capacitors. It is a well-known fact that shunt power capacitors are the most economical source to meet the reactive power requirements of inductive loads and transmission lines operating at a lagging power factor.This paper describes new contributions to the problem of optimization of size and control setting of shunt capacitors on distribution feeders, so that the losses along the feeder are minimized. The variation of the KVAR of the load on the feeder with the distance from the substation is assumed to be linear. The parameters of this function are estimated from the available KVAR loading on the feeder first by using least-square techniques and then by using least-absolute-value parameter estimation techniques. The results obtained are compared with that obtained if the current profile is assumed to be uniformly distributed on the feeder. Our results show that the optimum size of the capacitor bank as well as its optimum location depend on the parameters of the model used for the load. Also, our results show a large saving in the size of the capacitor banks used with a considerable per-unit-loss reduction along the feeder.This work was supported by the National Science and Engineering Research Council of Canada, Grant No. A4146. The first author acknowledges the help received from Engineer Samy Soliman for reviewing all the mathematical expressions in this paper.     

A three-unit standby redundant system with repair and preventive maintenance

This paper deals with the reliability of a renewable three-unit system under preventive maintenance activity. The Laplace transform of the reliability function and the mean lifetime of the system have been obtained under the assumption that the failure times, repair times, inspection times and maintenance times are random variables having different distributions. Some special cases also have been obtained.     

Nonlinear instabilities in TCP-RED

This work develops a discrete-time dynamical feedback system model for a simplified TCP network with RED control and provides a nonlinear analysis that can help in understanding observed parametric sensitivities. The model describes network dynamics over large parameter variations. The dynamical model is used to analyze the TCP-RED operating point and its stability with respect to various RED controller and system parameters. Bifurcations are shown to occur as system parameters are varied. These bifurcations, which involve the emergence of oscillatory and/or chaotic behavior, shed light on the parametric sensitivity observed in practice. The bifurcations arise due to the presence of a nonlinearity in the TCP throughput characteristic as a function of drop probability at the gateway. Among the bifurcations observed in the system are period doubling and border collision bifurcations. The bifurcations are studied analytically, numerically, and experimentally.     

Asymptotic stability and instability of the solutions of systems with impulse action

In this paper, we study the stability of the zero solution of a system of ordinary differential equations subject to impulse action. Using the method of Lyapunov functions, we obtain tests for asymptotic stability or instability of the system. Illustrative examples are given.     

Effect of rapid solidification and small additions of Zn and Bi on the structure and properties of Sn-Cu eutectic alloy

The Sn-Cu eutectic alloy has been produced by rapid solidification using the melt-spinning technique, and both Zn and Bi have been added individually to it, in the ratio 0.5 wt.%. X-ray diffraction (XRD) analysis and differential thermal analysis (DTA) have been carried out. Resistivity, Vickers microhardness (HV), and yield stress (σ_y) have been measured. Also a new method for measuring creep has been described using a HV tester. The creep measured by this method is termed “microcreep.” It is a quick, nondestructive method and requires a small sample, about 1 cm², with thickness 1 mm or less. The results show that formation of Cu₃₉Sn₁₁ occurs due to the addition of both Zn and Bi. The addition of Zn increases HV and σ_y, but slightly lowers the creep resistance; however, the addition of Bi deteriorates the creep resistance. Also, it is found that the creep rate of as-quenched melt-spun alloys is high.     

Synchronization over fading dispersive channels

An investigation is reported of an acquisition system for digital communication over fading dispersive channels that is optimum in the maximum-likelihood sense. A performance measure for the synchronizer in the acquisition mode is defined. Upper and lower bounds on the performance measure are derived. The effective bounds on parameters, such as signal-to-noise ratio, pulse width and modulation, number of pulses, spread of the channel, and the size of the resolution cell, on the performance of the synchronizer is investigated     

New Wide Band Low Power CMOS Current Conveyors

New Class-A second-generation CMOS current conveyor (CCII) suitable for high frequency applications is proposed. It provides low input impedance and accurate voltage and current tracking. Targeting low power dissipation, the Class-AB version of the proposed Class-A architecture is introduced as well. Simulation results are included.     

Studies on 3,5-diaminopyrazole derivatives

The behaviour of 3,5-diamino-4-phenylazopyrazole toward a variety of reagents is reported. Several new 3,5-diaminopyrazole derivatives as well as amino derivatives of fused pyrazoles have been prepared.

---

Untersuchungen an 3,5-Diaminopyrazol-Derivaten

Zusammenfassung Es wird über das Verhalten von 3,5-Diamino-4-phenylazopyrazol gegenüber verschiedenen Agentien berichtet. Es wurden sowohl einige neue 3,5-Diaminooyrazol-Derivate als auch einige Aminoderivate von kondensierten Pyrazolen dargestellt.