Ion‐imprinted poly(methyl methacrylate‐vinyl pyrrolidone)/poly(vinylidene fluoride) blending membranes for selective removal of ruthenium(III) from acidic water solutions

While conventional approaches have been studied for removal of ruthenium(III) ions (Ru(III)), this work focuses on the applicability of ion‐imprinted poly(methyl methacrylate‐vinyl pyrrolidone)/poly(vinylidene fluoride) blending membranes (Ru(III)–ion‐imprinted membrane[IIM]) for selective removal of Ru(III) from acidic water solutions. In order to measure the effectiveness of these imprinted membranes, after fabrication, binding experiments were done with aqueous Ru(III) solutions. The results showed that Ru(III)‐IIMs were fabricated successfully at various blending ratios, and their chemical components, microstructures, hydrophilicity, and water fluxes were measured. In pH range 0.5 to 5.0, binding capacity (Q_e) of Ru(III) onto Ru(III)‐IIM increases remarkably with pH and then reaches to a maximum value (53.52 mg/g) at pH 1.5. After that, Q_e gradually decreases. Compared with a nonimprinted membrane, Ru(III)‐IIM demonstrates higher selectivity for Ru(III) at pH 1.5 in the presence of Ni(II) and Cu(II) ions, and its selectivity coefficients for Ru(III)/Ni(II) and Ru(III)/Cu(II) are 3.70 and 3.32, respectively. Also, Ru(III)‐IIM shows a good chemical stability and reusability. C─N and C═O bonds within poly(vinyl pyrrolidone) segments of poly(methyl methacrylate‐vinyl pyrrolidone) (P(MMA‐VP)) participate the uptake of Ru(III). Ru(III)‐IIM exhibited excellent hydrophilicity and Ru(III) selective adsorption ability and reusability and has potential to be used for Ru(III) removal from acidic water solutions.     

FeOOH Nanocubes Anchored on Carbon Ribbons for Use in Li/O2 Batteries

A composite of FeOOH nanocubes anchored on carbon ribbons has been synthesized and used as a cathode material for Li/O₂ batteries. Fe²⁺ ion-exchanged resin serves as a precursor for both FeOOH nanocubes and carbon ribbons, which are formed simultaneously. The as-prepared FeOOH cubes are proposed to have a core–shell structure, with FeOOH as the shell and Prussian blue as the core, based on information from XPS, TEM, and EDS mapping. As a cathode material for Li/O₂ batteries, FeOOH delivers a specific capacity of 14816 mA h g⁻¹_cathode with a cycling stability of 67 cycles over 400 h. The high performance is related to the low overpotential of the oxygen reduction/evolution reaction on FeOOH. The cube structure, the supporting carbon ribbons, and the -OOH moieties all contribute to the low overpotential. The discharge product Li₂O₂ can be efficiently decomposed in the FeOOH cathode after a charging process, leading to higher cycling stability. Its high activity and stability make FeOOH a good candidate for use in non-aqueous Li/O₂ batteries.     

[Ru(dcbpy)2dppz]2+/Fullerene Cosensitized PTB7-Th for Ultrasensitive Photoelectrochemical MicroRNA Assay

A new cosensitization photoelectrochemical (PEC) strategy was established by using a donor–acceptor-type photoactive material, poly{4,8-bis[5-(2-ethylhexyl)thiophen-2-yl]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl-alt-3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophene-4,6-diyl} (PTB7-Th), as a signal indicator, which was cosensitized with bis(4,4′dicarboxyl-2,2′-bipyridyl)(4,5,9,14-tetraazabenzo[b]triphenylene)ruthenium(II) ([Ru(dcbpy)₂dppz]²⁺) embedded in the grooves of the DNA duplex and fullerene (nano-C₆₀) immobilized on the surface of DNA nanoflowers for microRNA assay. [Ru(dcbpy)₂dppz]²⁺ and nano-C₆₀ could effectively enhance the photoelectric conversion efficiency (PCE) of PTB7-Th as a result of well-matched energy levels among nano-C₆₀, [Ru(dcbpy)₂dppz]²⁺ and PTB7-Th, leading to a clearly enhanced photocurrent signal. Meanwhile, a target recycling magnification technique based on duplex-specific nuclease was applied in this work to obtain higher detection sensitivity. The proposed biosensor demonstrated excellent analytical properties within a linear detection range of 2.5 fm to 2.5 nm and a limit of detection down to 0.83 fm . Impressively, this cosensitization PEC strategy offers an effective and convenient avenue to significantly improve the PCE of a photoactive material, resulting in a remarkably improved photocurrent signal for ultrasensitive and highly accurate detection of various targets.     

含喹喔啉杨梅素衍生物的合成及生物活性

利用活性拼接原理, 将喹喔啉引入到杨梅素结构中, 合成了一系列含喹喔啉基团的杨梅素新型衍生物. 采用浊度法测试了目标化合物的体外抑菌活性, 结果表明, 目标化合物对柑橘溃疡病菌(X. Citri)和水稻白叶枯病菌(X. Oryzae)均表现出较好的抑制活性. 目标化合物对柑橘溃疡病菌的抑制活性(EC₅₀)均优于对照药叶枯唑和噻菌铜(EC₅₀分别为54.85和61.13 μg/mL), 其中化合物4o抑制活性(EC₅₀=11.17 μg/mL)最优; 目标化合物对水稻白叶枯病菌的抑制活性EC₅₀均优于对照药叶枯唑和噻菌铜(EC₅₀分别为148.20和175.47 μg/mL), 其中化合物4f抑制活性(EC₅₀=34.49 μg/mL)最优. 采用半叶枯斑法测试了目标化合物的抗烟草花叶病毒(TMV)活性, 结果表明, 所有目标化合物在浓度为500 mg/L时均有一定的抑制作用.     

生物电化学系统降解多环芳烃萘及微生物群落研究

采用单室空气阴极微生物燃料电池(MFC)反应器构型, 以不同浓度萘为基底物质, 考察MFC的产电性能、 萘降解率、 化学需氧量(COD)和总有机碳含量(TOC)降解率及MFC阴阳极微生物活性和多样性. 结果表明, 循环伏安曲线受不同浓度萘的影响变化较为明显, 随着萘浓度的增大, 最大功率密度呈下降趋势, 且萘对MFC的阴极电极电势影响较大; 当萘的浓度为15 mg/L时, MFC最大功率密度可达(645.841±28.08) mW/m ²; 对萘的降解率高达100%, 且MFC对COD和TOC的降解率随着萘浓度的提高而增大, 但是增大的速率逐渐减小. 对MFC阳极微生物膜进行高通量测序发现, Geobacter是优势菌属, 相对丰度达81%, 阴极主要以Aquamicrobium为主.     

双金属合金团簇M12Ni(M=Pt,Sn,Cu)催化甲烷干法重整反应的理论研究

利用密度泛函理论(DFT)研究了M₁₂Ni(M=Pt, Sn, Cu) 3种双金属合金团簇的电子活性和结构稳定性, 并探讨了甲烷干法重整反应(DRM)在M₁₂Ni双金属团簇表面的反应能量变化情况. 经比较发现甲烷脱氢和二氧化碳活化过程在Pt₁₂Ni团簇表面进行需克服的活化能垒最低, 反应最易进行. Sn₁₂Ni团簇上生成碳需要较高的活化能, 说明Sn₁₂Ni团簇能够有效抑制焦碳的生成, 一定程度上克服了碳沉积导致的催化剂失活现象, 并且Sn₁₂Ni团簇在C ^*和CH ^*氧化过程中表现出最佳的催化活性. Cu₁₂Ni团簇仅在甲烷脱氢过程中表现出较为优异的催化活性.     

Self-Healable Polyelectrolytes with Mechanical Enhancement for Flexible and Durable Supercapacitors

The practical application of advanced personalized electronics is inseparable from flexible, durable, and even self-healable energy storage devices. However, the mechanical and self-healing performance of supercapacitors is still limited at present. Herein, highly transparent, stretchable, and self-healable poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPSA)/poly(vinyl alcohol) (PVA)/LiCl polyelectrolytes were facilely prepared by one-step radical polymerization. The cooperation of PAMPSA and PVA significantly increased the mechanical and self-healing capacity of the polyelectrolyte, which exhibited superior stretchability of 938 %, stress of 112.68 kPa, good electrical performance (ionic conductivity up to 20.6 mS cm⁻¹), and high healing efficiency of 92.68 % after 24 h. After assembly with polypyrrole-coated single-walled carbon nanotubes, the resulting as-prepared supercapacitor had excellent electrochemical properties with high areal capacitance of 297 mF cm⁻² at 0.5 mA cm⁻² and good rate capability (218 mF cm⁻² at 5 mA cm⁻²). Besides, after cutting in two the supercapacitor recovered 99.2 % of its original specific capacitance after healing for 24 h at room temperature. The results also showed negligible change in the interior contact resistance of the supercapacitor after ten cutting/healing cycles. The present work provides a possible solution for the development of smart and durable energy storage devices with low cost for next-generation intelligent electronics.     

Development of Lysosome-Targeted Fluorescent Probes for Cys by Regulating the Boron-dipyrromethene (BODIPY) Molecular Structure

Our previous discovery suggested that substituents on the 1,7 positions delicately modulate the sensing ability of the meso-arylmercapto boron-dipyrromethene (BODIPY) to biothiols. In this work, the impact of delicate modulations on the sensing ability is investigated. Therefore, 1,7-dimethyl, 3,5-diaryl substituted BODIPY is designed and developed and its conformationally restricted species with a meso-arylmercapto moiety ( DM-BDP-SAr and DM-BDP-R-SAr ) as selective fluorescent probes for Cys. Moreover, the lysosome-target probes ( Lyso-S and Lyso-D ) based on DM-BDP-SAr carrying one or two morpholinoethoxy moieties were developed. They were able to detect Cys selectively in vitro with low detection limits. Both Lyso-S and Lyso-D localized nicely in lysosomes in living HeLa cells and exhibited red fluorescence for Cys. Moreover, a novel fluorescence quenching mechanism was proposed from the calculations by density functional theory (DFT). The probes may go through intersystem crossing (from singlet excited state to triplet excited state) to result in fluorescence quenching.     

New Type of Columnar Liquid Crystal Superlattice in Double-Taper Ionic Minidendrons

Wedge-shaped molecules, such as dendrons, are among the most important building blocks for directed supramolecular self-assembly. Here we present a new approach aimed at widening the range and complexity of potential mesophases by introducing double-tapered mesogens. Two series of compounds are presented, both alkali metal salts (Li, Na, Cs) of 3,4,5-tris-alkoxybenzoic acid with a second tapered tris-alkoxyaryl group attached at the end of an alkoxy chain. The double-tapered compounds all display an unusual hexagonal columnar phase consisting of one ionic and three non-ionic columns per unit cell. The cation size has an unexpectedly drastic effect on unit cell size. Unlike most columnar phases, the current phases show unusually high dimensional stability on heating, and high stiffness in spite of being 80–85 % aliphatic, attributed to their molecular topology. The described approach may lead to co-assemblies of multifunctional materials, for example, parallel p- and n-semiconducting nanowires or parallel ionic and electronic conductors.     

Aromatic inorganic acid radical

Stable radicals are challenging to prepare due to their intrinsic high reactivity. Herein, three trisphenolamine radicals were readily synthesized and exhibited unexpected thermal/electrochemical stability and semiconductor property. These three nitroxide radicals could be considered as a class of aromatized nitro groups or HNO_3 derivatives. The closed-shell nitro-like and open-shell nitroxide resonance structure contribute to their outstanding stability. Furthermore, the tunable ground states, extremely low band gap and p-type charge transport properties were systematically investigated. More importantly, the work presents the concept of aromatic inorganic acid radical(AIAR) and aggregation-induced radical(AIR) mechanism to understand the intrinsic structureproperty relationship of these radicals. In addition, we provide a novel strategy for the design of stable and low bandgap radicals for organic electronics, magnetics, spintronics, etc.