内-α-取代-α-甲基双环[2,2,1]庚烷-2-基甲醇的合成及其结构与香气的关系

合成了18种内-α-取代-α-甲基双环[2,2,1]庚烷-2-基甲醇(Ⅰ)。测定了所有化合物的折光率(或熔点)、质谱、红外光谱、~1H核磁共振谱、气相色谱的保留时间和薄层色谱的比移值。评定了它们的香气,并与相应的内-α-取代-α-甲基双环[2,2,1]-5-庚烯-2-基甲醇(Ⅱ)系列化合物的香气进行了比较,初步探讨了结构与香气的关系。     

Liquid–solid disk extraction followed by supercritical fluid elution and gas chromatography of phenols from water

A method combining the techniques of liquid – solid disk extraction (LSDE) and supercritical fluid elution (SFE) has been developed for the phenols regulated by the Clean Water Act. LSDE uses a disk or membrane made of polytetrafluoroethylene (PTFE) fibrils impregnated with small particles, e.g. styrene divinylbenzene (SDB) resin, to extract phenols from water. After disk extraction the retained analytes are eluted from the disk using SFE. SFE is used as an alternative to liquid solvent elution with an organic solvent. Analytes are separated, identified, and quantified using gas chromatography – ion trap detector mass spectrometry (GC-ITDMS). The method is capable of sub parts per billion detection limits, and precision of 5–28% RSD. Evaluation of various disks or membranes, such as C₁₈-silica disks, SDB disks, and ion exchange membranes, has also been performed for the extraction of phenols from water. The results obtained from the in-situ aqueous acetylation of phenols and extraction of their acetates are quantitative. The utilization of LSDE and SFE techniques has proven to be a more effective approach than liquid – liquid extraction in minimizing air pollution and solvent waste.     

NITROXIDE-MEDIATED FREE RADICAL SYNTHESIS OF MESOGEN-JACKETED LIQUID CRYSTAL POLYMERS*

The first TEMPO-mediated "living" free radical polymerization of liquid crystallinemonomer, 2, 5-bis[(4-methoxyphenyl)oxycarbonyl]styrene(MPCS), was carried out at 130℃ withBPO as an initiator. The molecular weight of the polymer can be varied from rather low values to highvalues while maintaining narrow polydispersity. It was observed that the polymerization of MPCSproceeded much faster than that of styrene. A tentative explanation for this fast polymerization wassuggested.     

The interfacial dilational properties of hydrophobically modified associating polyacrylamide studied by the interfacial tension relaxation method at an oil-water interface

The interfacial dilational viscoelastic properties of hydrophobically associating block copolymer composed of acrylamide (AM) and a low amount of 2-phenoxylethyl acrylate (POEA) (<1.0 mol%) at the octane-water interfaces were studied by means of the interfacial tension relaxation method. The dependencies of interfacial dilational elasticity and viscous component on the dilational frequency were investigated. The interaction of hydrophobically associating block copolymer [P(AM/POEA)] with sodium dodecyl sulfate (SDS) has been explored. The results show that at lower frequency, the dilational elasticity for different concentration copolymer is close to zero; at higher frequency, the dilational elasticity shows no change with increased frequency; At moderate frequency (10(-3)-1 Hz), the dilational elasticity decreased with a decrease in the dilational frequency. The results show that the hydrophobic groups of [P(AM/POEA)] chains can be associated by inter- or intrachain liaisons in water solution. The dilational viscous component for P(AM/POEA) comes forth a different maximum value at different frequencies when the polymer concentration is different. It is generally believed that the dilational viscous component reflects the summation of the various microscopic relaxation processes at and near the interface and different relaxation processes have different characteristic frequencies. The spectrum of dilational viscous component may appear more than once maximum values at different frequencies. The influence of SDS on the limiting dilational elasticity and viscous component for polymer solution was elucidated. For 5000 ppm polymer solution, the limiting dilational elasticity decreased with an increase in SDS concentration. The dilational viscous component passed through a maximum value with a rise in the dilational frequency, which appeared at different frequency when SDS concentration is different; and the higher is the concentration, the lower is the dilational frequency. It can be explained that macromolecules may be substituted by SDS molecules in the interface and the interaction of molecules decrease, which makes the limiting dilational elasticity decrease. For 200 ppm polymer solution, the limiting dilational elasticity increased firstly and then decreased with SDS concentration increasing. This may be explained that the interfacial polymer concentration is so low that SDS molecules absorbed in the interface dominate dilational properties of the interfacial film even at very low SDS concentration. However, SDS molecules can gradually substitute the polymer molecules in the interface with a rise in SDS concentration, which results in the decrease in the limiting dilational elasticity.     

Development and application of a new general method for the asymmetric synthesis of syn- and anti-1,3-amino alcohols

A general method is described for asymmetric synthesis of both syn- and anti-1,3-amino alcohols. The first application of metalloenamines derived from N-sulfinyl imines is reported for the highly diastereoselective addition to aldehydes. The reduction of the product beta-hydroxy N-sulfinyl imines 2 with catecholborane and LiBHEt(3) provides syn- and anti-1,3-amino alcohols with very high diastereomeric ratios. This method was found to be effective for a variety of substrates incorporating either aromatic or various aliphatic substituents. The convergent and efficient asymmetric syntheses of the two natural products, (-)-8-epihalosaline and (-)-halosaline, were also accomplished.     

Synthesis and crystal structures of Group 6 metal carbonyl complexes containing S-rich bis(pyrazol-1-yl)methane ligands

The reaction of 3(5)-methylthio-5(3)-phenylpyrazole with dibromomethane under phase-transfer catalytic conditions only affords a new ligand, bis(3-phenyl-5-methylthiopyrazol-1-yl)methane. However, the reaction of 3(5)-methylthio-5(3)-p-methoxyphenylpyrazole or 3(5)-methylthio-5(3)-tert-butylpyrazole with dibromomethane under the same conditions yields three isomers, respectively, indicating that the substituents significantly affect the steric and electronic properties of pyrazole ring during the formation of ligands. Treatment of these potential polydentate ligands with M(CO)₆ (M=Cr, Mo or W) under UV irradiation at room temperature affords (NN)M(CO)₄ derivatives, in which some complexes contain asymmetric substituted bis(pyrazol-1-yl)methane ligands. The X-ray crystal structure analyses indicate that the sulfur atoms in these complexes do not take part in the coordination to the metal centers, and S-rich bis(pyrazol-1-yl)methanes actually act as bidentate chelating ligands by two nitrogen atoms. It is also interesting that in order to reduce the repulsion of methyl groups with carbonyls, the methyl groups in these complexes are oriented away from the metal centers.     

Physical/chemical separations in the break-up of highly charged droplets from electrosprays

Highly-charged droplets, as formed by an electrospray process, are known to undergo asymmetric fission to form smaller droplets. We have observed a chemical and physical separation phenomenon that occurs in the droplet break-up process and is related to a compound's surface activity in solution. Two experimental approaches demonstrated that the smaller satellite droplets and the progeny droplets generated by the spray formation and asymmetric fission processes to be surfactant-enriched. These smaller droplets were also effectively separated from the larger primary and residual droplets because of their smaller inertia and high surface charge density, and a region attributed to the initially formed smaller satellite droplets was found to be strikingly confined in a narrow periphery region of the electrospray. The phenomenon may have utility for chemical separations and have significant implications for the sensitivity and selectivity of electrospray ionization-mass spectrometry.     

Intriguing self-assembly of large granules of F-actin facilitated by gelsolin and alpha-actinin

We report microscopic observations and a structural determination of actin granules self-assembled in concentrated solutions of actin filaments (F-actin). Optical microscopy shows reproducible formation of numerous and stable granules of densely packed F-actin of variable sizes on the order of 10 microm. These granules coexist with a uniform network of F-actin of a lower concentration. The microscopic segregation of F-actin into two distinct states is assisted by an actin cross-linking protein, alpha-actinin. The rapid on and off rates and temperature sensitivity of the alpha-actinin/F-actin interaction facilitate the formation of multi-micrometer-sized granules of well-defined shapes. Additional physical factors such as the excluded volume effect and the minimization of surface energy act in concert with the specific molecular interactions to define the intriguing granular formation. Both the biochemical specificity of alpha-actinin and the thermodynamics of phase transitions are required for understanding such large scale self-assembly.     

Electronic structures of dihedral (D5h, D5d, D6h, D6d) fullerenes

By means of our proposed method for Hückel theory calculation, we have calculated the electronic structures of dihedral (D_5h, D_5d, D_6h, D_6d) fullerences, which are generated from icosahedral C₂₀, C₆₀, C₈₀, C₁₈₀, C₂₄₀ and C₅₄₀, respectively. From the calculated results of 1224 fullerence molecules, certain rules on the stability and chemical reactivity have been drawn for such types of dihedral fullerenes.     

The structure and magnetic properties of μ3-oxotriiron(III) complex [Fe3O(OBz)6(CH3OH)3](NO3)(CH3OH)2

A new μ₃-O triiron(III) complex [Fe₃O(OBz)₆(CH₃OH)₃](NO₃)(CH₃OH)₂ (HOBZ = benzoic acid) has been synthesized, its structure has been determined and variable temperature magnetic susceptility has also been measured. In the molecule, three iron atoms formed an equilateral triangle with μ₃-O in center. The fitting to the magnetic susceptibility showed that an intramolecular antiferromagnetic exchange interaction occurred between iron atoms with J=-25.51 cm^?1, and a weaker intermolecular autiferromagnetic exchange interaction occurred with zJ' = ?2.30 cm^?1.