基于安卓电视机芯智能升级的应用研究

对比了目前几种安卓电视智能升级方案,提出了一种在现有电视技术条件下,通过一个自定义接口完成安卓电视机芯智能升级的方案。该方法具有电视整机机芯升级简单、便捷、成本低、原有整机利用率高的优点。并以50个管脚的自定义接口为例,具体阐述了安卓电视机芯升级的软件、硬件解决方案。     

Joint channel assignment and routing in multiradio multichannel wireless mesh networks with directional antennas

The aggregate capacity of a wireless mesh network (WMN) is severely affected by interflow interference. In this paper, we propose a network architecture that incorporates directional antennas with multiple orthogonal channels to effectively enhance the performance of WMNs. First, a sectored connectivity graph is introduced to model multiradio multichannel WMNs with directional antennas. Next we formulate the topology design, directional interface assignment, channel allocation, and routing mathematically as a mixed integer linear programming problem. This problem is solved using an iterated local search algorithm to obtain optimized network resource allocation. Simulation results indicate that the proposed architecture can achieve higher packet delivery ratio while providing better network fairness. Copyright © 2014 John Wiley & Sons, Ltd.     

Generalized intuitionistic fuzzy geometric aggregation operators and their application to multi-criteria decision making

In this paper, we extend the generalized weighted geometric and generalized ordered weighted geometric operators to intuitionistic fuzzy environments, that is, we develop a series of generalized intuitionistic fuzzy geometric operators to aggregate input arguments that are expressed by intuitionistic fuzzy values based on Archimedean t-conorm and t-norm. Then some desired properties of these aggregation operators are investigated. The relations between these operators and some existing intuitionistic fuzzy geometric aggregation operators are discussed in detail. Furthermore, applying these proposed operators, we develop an approach for multi-criteria decision making with intuitionistic fuzzy information. Finally, a practical example is given to verify the developed approach and to demonstrate its practicality and effectiveness.     

一种用于角度传感器中的仪表放大器

主要设计了一种用于角度传感器系统中的仪表放大器。为了满足角度传感器系统中对信号频率的要求,需要仪表放大器的带宽足够宽能够达到3.3 MHz。该电路采用标准三运算放大器结构电路,以折叠共源共栅结构的放大器为基础,对共模信号进行抑制,对差分信号进行放大,提高了放大器的精度,增大了仪表放大器的带宽。采用Chartered 0.35μm CMOS双栅工艺对电路进行仿真和流片验证,测试结果表明:在0.8～2.85 V内,仪表放大器的共模抑制比达到了102 dB,带宽能够达到3.3 MHz,输出摆幅为1.7 V,电路功能良好,达到了设计要求,该电路可用于汽车电子以及医疗设备系统。     

A ligand-free copper(I) oxide catalyzed strategy for the N-arylation of azoles in water

A simple and practical protocol has been developed for the cross-coupling of azoles and aryl iodides under ligand-free copper(I) oxide catalyzed conditions in water. The protocol uses tetrabutylammonium bromide (TBAB) as the phase-transfer catalyst, and water as the solvent, and shows good tolerance towards various functional groups.     

Sorption of radioeuropium onto attapulgite: effect of experimental conditions

Batch sorption experiments were performed to remove Eu(III) ions from aqueous solutions by using attapulgite under ambient conditions. Different experimental conditions, such as contact time, solid content, foreign ions, pH, ionic strength, fulvic acid and temperature, have been investigated to study their effect on the sorption property. The results indicated that the sorption of Eu(III) onto attapulgite was strongly dependent on pH, ionic strength and temperature. The sorption increased from about 8.9 to 90% at pH ranging from 2 to 6 in 0.01 mol/L NaNO₃ solution. The Eu(III) kinetic sorption on attapulgite was fitted by the pseudo-second-order model better than by the pseudo-first-order model. The sorption of Eu(III) onto attapulgite increased with increasing temperature and decreasing ionic strength. The Langmuir and Freundlich models were used to simulate the sorption isotherms, and the results indicated that the Freundlich model simulated the data better than the Langmuir model. The thermodynamic parameters (∆G ^o, ∆S ^o, ∆H ^o) were determined from the temperature dependent isotherms at 298.15, 318.15 and 338.15 K, and the results indicated that the sorption reaction was an endothermic and spontaneous process. The results suggest that the attapulgite is a suitable material as an adsorbent for preconcentration and immobilization of Eu(III) from aqueous solutions.     

Synthesis,Crystal Structure,and Properties of the 3D Porous Framework [Zn(INAIP)]·DMA·H2O

A new three‐dimensional (3D) porous framework [Zn(INAIP)] · DMA · H₂O ( 1 ) [INAIP = 5‐(isonicotinamido)isophthalate, DMA = N,N′‐dimethylacetamide] was synthesized by solvothermal methods and characterized by single‐crystal and powder X‐ray diffraction, as well as thermogravimetric analysis. The results of X‐ray diffraction analyses revealed that complex 1 has an unusual 3D architecture with the (3,6)‐connected rutile ( rtl ) topology. The adsorption behavior shows that compound 1 exhibits selective adsorptions of CO₂ over N₂ after the removal of the solvent molecules within the pores.     

Comparison and optimisation of biodiesel production from <Emphasis Type="Italic">Jatropha curcas</Emphasis> oil using supercritical methyl acetate and methanol

In this study, biodiesel has been successfully produced by transesterification using non-catalytic supercritical methanol and methyl acetate. The variables studied, such as reaction time, reaction temperature and molar ratio of methanol or methyl acetate to oil, were optimised to obtain the optimum yield of fatty acid methyl ester (FAME). Subsequently, the results for both reactions were analysed and compared via Response Surface Methodology (RSM) analysis. The mathematical models for both reactions were found to be adequate to predict the optimum yield of biodiesel. The results from the optimisation studies showed that a yield of 89.4 % was achieved for the reaction with supercritical methanol within the reaction time of 27 min, reaction temperature of 358°C, and methanol-to-oil molar ratio of 44. For the reaction in the presence of supercritical methyl acetate, the optimum conditions were found to be: reaction time of 32 min, reaction temperature of 400°C, and methyl acetate-to-oil molar ratio of 50 to achieve 71.9 % biodiesel yield. The differences in the behaviour of methanol and methyl acetate in the transesterification reaction are largely due to the difference in reactivity and mutual solubility of Jatropha curcas oil and methanol/methyl acetate.     

Mechanical properties of hybrid inorganic-organic framework materials: establishing fundamental structure-property relationships

The mechanical properties of hybrid framework materials, including both nanoporous metal-organic frameworks (MOFs) and dense inorganic-organic frameworks, are discussed in this critical review. Although there are relatively few studies of this kind in the literature, major recent advances in this area are beginning to shed light on the fundamental structure-mechanical property relationships. Indeed research into the mechanical behavior of this important new class of solid-state materials is central to the design and optimal performance of a multitude of technological applications envisaged. In this review, we examine the elasticity of hybrid frameworks by considering their Young's modulus, Poisson's ratio, bulk modulus and shear modulus. This is followed by discussions of their hardness, plasticity, yield strength and fracture behavior. Our focus is on both experimental and computational approaches. Experimental work on single crystals and amorphized monoliths involved primarily the application of nanoindentation and atomic force microscopy to determine the elastic moduli and hardness properties. The compressibility and bulk moduli of single crystals and polycrystalline powders were studied by high-pressure X-ray crystallography in the diamond anvil cell, while in one instance spectroscopic ellipsometry has also been used to estimate the elastic moduli of MOF nanoparticles and deposited films. Theoretical studies, on the other hand, encompassed the application of first principles density-functional calculations and finite-temperature molecular dynamics simulations. Finally, by virtue of the diverse mechanical properties achievable in hybrid framework materials, we propose that a new domain be established in the materials selection map to define this emerging class of materials (137 references).