Power scaling of printed-circuit-board preionized TEA CO2 laser up to 3.6 kW

A high average power, high-repetition-rate TEA CO₂ laser employing printed-circuit-board preionizer is described. The power scaling of this preionization configuration has been demonstrated. The average output power reaches 3.6 kW at pulse repetition rate of 180 pps. Furthermore, the scaling-up ability of the rotating spark gap as high-voltage switch for high-average-power gas laser has been validated.     

电源最大输出功率的条件及公式的应用

当外电路的电阻等于电源内电阻时,电源输出功率最大,应用这个结论,可以省去许多计算步骤.但实际应用时还要注意一些问题,下面从几个方面加以讨论.1 电源实际输出功率与最大输出功率的区别 这是两个不同的概念,一些学生往往会用Pm=(?)/4r计算电源输出最大功率,其实,(?)/4r只是电源输出功率的极限,电源一般不在该状态下工作.     

Synthesis and luminescence properties of lanthanide(III) chelates with polyacid derivatives of thienyl-substituted terpyridine analogues

Two new polyacid derivative ligands of thienyl-substituted terpyridine analogues, N,N,N¹,N¹-[4′-(2?-thienyl)-2,2′:6′,2″-terpyridine-6,6″-diyl]bis(methylenenitrilo) tetrakis(acetic acid) (TTTA) and N,N,N¹,N¹-[2,6-bis(3′-aminomethyl-1′-pyrazolyl)-4-(2″-thienyl)pyridine] tetrakis(acetic acid) (BTTA), were synthesized, and the luminescence properties of their Eu³⁺ and Tb³⁺ chelates were investigated. The Eu³⁺chelates of the two ligands are strongly luminescent having luminescence quantum yields of 0.150 (TTTA-Eu³⁺) and 0.114 (BTTA-Eu³⁺), and lifetimes of 1.284 ms (TTTA-Eu³⁺) and 1.352 ms (BTTA-Eu³⁺), whereas their Tb³⁺ chelates are weakly luminescent. The TTTA-Eu³⁺ chelate was used for streptavidin (SA) labeling, and the labeled SA was used for time-resolved fluoroimmunoassay of insulin in human sera. The method gives the detection limits of 33 pg ml⁻¹.     

Nonlinear rheological behavior of silica filled solution‐polymerized styrene butadiene rubber

The reinforcement and nonlinear viscoelastic behavior have been investigated for silica (SiO₂) filled solution‐polymerized styrene butadiene rubber (SSBR). Experimental results reveal that the nonlinear viscoelastic behavior of the filled rubber is similar to that of unfilled SSBR, which is inconsistent with the general concept that this characteristic comes from the breakdown and reformation of the filler network. It is interesting that the curves of either dynamic storage modulus (G′) or loss tangent (tan δ) versus strain amplitude (γ) for the filled rubber can be superposed, respectively, on those for the unfilled one, suggesting that the primary mechanism for the Payne effect is mainly involved in the nature of the entanglement network in rubbery matrix. It is believed there exists a cooperation between the breakdown and reformation of the filler network and the molecular disentanglement, resulting in enhancing the Payne effect and improving the mechanical hysteresis at high strain amplitudes. Moreover, the vertical and the horizontal shift factors for constructing the master curves could be well understood on the basis of the reinforcement factor f(φ) and the strain amplification factor A(φ), respectively. The surface modification of SiO₂ causes a decrease in f(φ), which is ascribed to weakeness of the filler–filler interaction and improvement of the filler dispersion. However, the surface nature of SiO₂ hardly affects A(φ). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2594‐2602, 2007     

Quadtree based colour quantisation image compression

A new colour quantisation and quadtree based image compression scheme is proposed. The features of the new scheme are that colour palette ordering and requantisation of the decoded image for palette-based monitor displays are not required. Thus, fast decoding and displaying can be achieved     

DNS／GPS组合导航系统研究

本文阐述ＤＮＳ与ＧＰＳ组合导航的必要性、可行性及组合方法，给出了误差模型和卡尔曼滤波模型。选取观测量不同可有三种组合方式，通过模拟计算给出了相应曲线。当采用伪距及其变化率作为观测量时，其组合方式最佳，定位精度可达米级，航向精度可提高到０．２°。     

Development and applications of an on-line thermal neutron prompt-gamma element analysis system

This paper introduces the principles, instrumentation, implementation, and industrial applications of an on-line thermal neutron prompt-gamma element analysis system (using a²⁵²Cf neutron source, Am–Be neutron source, or neutron generator). The energy resolution of the system at the H prompt-gamma full-energy photopeak (2.22325 MeV) is 3.6 keV. The concentration measurement error of Al₂O₃, FeO₃, CaO, and SiO₂ is ±0.3%, ±0.1%, ±0.4%, and ±0.4%, respectively. The system has been tested on-site at both the Shandong and the Zhengzhou Aluminium Works. Our preliminary on-site measurements confirm that the stability, reliability, measurement range, and accuracy of the system can meet the requirements of the aluminium production process. Facilitation of this measurement at aluminium plants is expected to reduce plant costs by over 3 million dollars annually through reduced energy consumption, more rapid qualification of pulps being mixed during the production process, and in reduced labor costs.Other participants of Shandong and Zhenghou Aluminium Works are: Wang Aili, Zengshen, Dei Jianguo and Lu Jinnan, Wang Deyu, Jin Hequan.     

锁模激光器在人卫激光测距中的应用

在人卫激光测距中,激光器的性能至关重要,它对仪器的测程和精度起着决定性的作用。本文将描述锁模激光器的结构、性能及其在人卫激光测距中的应用与发展.     

The growth of Pd thin films on a 6H-SiC(0 0 0 1) substrate

Pd thin films, grown on Si-rich 6H-SiC(0 0 0 1) substrates, were studied by atomic force microscopy, electron diffraction and high-resolution transmission electron microscopy. It is concluded that the growth is successful only when all the growth process takes place at room temperature. Under these conditions a very good epitaxial growth of Pd is achieved, despite the large misfit (about 8.6%) between Pd and the substrate and the existence of a semi-amorphous layer between the thin film and the substrate. A large number of twins appear in these films.