Simulation of island aggregation influenced by substrate temperature, incidence kinetic energy and intensity in pulsed laser deposition

Using kinetic Monte Carlo method, we have simulated a pulsed energetic growth process in pulsed laser deposition. During the growth of film, substrate temperature mainly influences upon film morphology by directly enhancing the adatom mobility through the temperature-dependent thermal vibration. By contrast, the effect of incidence kinetic energy on film growth is complex resulting from the collisions between the incident particles and the adatoms. The results show that improving incident kinetic energy cannot significantly accelerate the migration rate of adatom but change surface microstructure and promote single adatom formation resulting in more island aggregation density. Moreover, since pulse-influx characterizes pulsed laser deposition, the intensity per pulse contributes to the evolvement of nucleation density and the results illustrate that a general scaling law different from ordinary power law still exists in energetic growth of pulsed laser deposition.     

一类非线性方程存在多个极限环的一个充分条件

关于方程(1)的极限环唯多性问题,不少人作了研究,[1]引进“n重互相包含”曲线类,,经[2]的改进获得较好的结果,但这类曲线要求的条件较多。本文不从[1]的观点出发,不包含[1]的全部条件,独立地用①11。’,LtnnoB变换折叠相平面,据轨线与折叠线交点的位置,对(1)的等价方程按线性方程积分,将积分的正负项作成比值进行比较,得出一组充分条件。     

高能e+e－湮没强子多重数的质量关系

利用一个描述强子质量谱成功的夸克模型确定出得到的强子多重数普适质量关系〈n〉=aexp(–bm)中的参数b,发现对于介子、重子是一个普适的常数.利用这个质量公式给出计算各种粒子多重数的表达式,进而以高能e⁺e^－湮没为例计算出各种粒子多重数与实验以及其他模型做了比较,表明这个没有任何假定的质量关系同样能够解释实验.     

掺Eu3+硅基材料的发光性质

通过溶胶－凝胶技术制备了掺Eu^3 的硅基材料并测试了其三维荧光光谱、激光谱和发射光谱，结果显示，最佳激发波波长为350nm,最强荧光波长为620nm；在350nm光激发下的发射光谱显示Eu^3 的特征发射光谱，产生4条谱带，分别是577nm(^5D0-^7F0)，588nm(^5D0-^7F1),596nm(^5D0-^7F1)和610nm(^5D0-^7F2)。     

A transmit/receive IF chip set for WCDMA mobiles in 0.35 /spl mu/m CMOS

An implementation of the IF section of WCDMA mobile transceivers with a set of two chips fabricated in an inexpensive 0.35-/spl mu/m two-poly three-metal CMOS process is presented. The transmit/receive chip set integrates quadrature modulators and demodulators, wide dynamic range automatic gain control (AGC) amplifiers, with linear-in-decibel gain control, and associated circuitry. This paper describes the problems encountered and the solutions envisaged to meet stringent specifications, with process and temperature variations, thus overcoming the limitations of CMOS devices, while operating at frequencies in the range of 100 MHz-1 GHz. Detailed measurement results corroborating successful application of the new techniques are reported. A receive AGC dynamic range of 73 dB with linearity error of less than /spl plusmn/2 dB and spread of less than 5 dB for a temperature range of -30/spl deg/C to +85/spl deg/C in the gain control characteristic has been measured. The modulator measurement shows a carrier suppression of 35 dB and sideband/third harmonic suppression of over 46 dB. The core die area of each chip is 1.5 mm/sup 2/.     

考虑材料熔化潜热的高温高压本构

本文在修正的SCG模型基础上，提出了一种考虑了熔化潜热的高温高压本构.该本构所给出的铝的剪切模量的变化分为三个阶段：加工硬化，温度软化和熔化，并在完全熔化点处变为零.并且在前两个阶段，计算的结果与修正的SCG模型所给出的剪切模量的差别不超过4%，这一差别是在动高压实验误差范围之内的，在熔化区所给出的剪切模量与现有的实验数据相符合. 关键词： 剪切模量 熔化潜热 修正的SCG模型 动高压实验     

偏振模色散统计特性的研究

利用动态方程研究了偏振模色散矢量的统计特性 ,分别用统计系综和频率系综两种方法进行数值模拟。数值结果表明 ,统计系综和频率系综两种方法的结果一致。在大归一化距离条件下 ,均方根时延的平方随归一化距离线性变化 ;偏振模色散矢量的各个分量服从高斯分布 ,差分群时延服从麦克斯韦分布 ;偏振模色散矢量弥散于整个邦加球     

激光穿透焊的三维数值模拟

本文对激光穿透焊进行了三维数值模拟，除考虑焊接速度影响外，还研究了Ｍａｒａｎｇｏｎｉ对流对熔池流动与传热的影响。将三维数值模拟结果与相应的二维模拟结果进行了比较，结果表明，Ｍａｒａｎｇｏｎｉ对流对熔池的形成有很大的影响，因此不可忽略。本文还给出了估计激光穿透焊中蒸气孔尺寸与焊接热效率的方法。     

近非临界相位匹配温度调谐MgO：LiNbO3OPO

通过对MgO:LiNbO3参量过程温度相位匹配及走离角，允许参量等运转参数的理论计算与分析，确定了晶体的切割角度θ=82℃，以近非临界相位匹配（NCPM）取代NCPM，将温度调节范围控制在较低的温度上，研制了532nm泵浦的MgO:LiNbO3温度调谐脉冲光学参数振荡器（OPO），在800～1700nm波段实现连续调谐输出。参量泵浦功率密度阈值为57.3MW/cm^2，泵浦能量约2倍阈值处，单谐振（SRO）参量转换效率为11%以上。     

枸橼酸莫沙必利的合成

分别以邻羟基对氨基苯甲醇钠，对氟苯甲醛，邻苯二甲酰亚胺为起始原料，制得3个中间体，用其中2个中间体经偶合，环化后与第3个中间体反应，再经成盐制得产品，其摩尔总收率为31．5％。