Electrochemical characterization of the redox couple of Fe(III)/Fe(II) mediated by grafted polymer electrode

A new grafted polymer electrode (GPE) (polystyrene as polymer) was grafted with acrylonitrile as a monomer using gamma irradiation to produce a new grafted polymer. The redox process of K₃Fe(CN)₆ during cyclic voltammetry was studied by the new GPE. The ratio of Ipc/Ipa >1 of GPE to GCE Ipc/Ipa = 1.7, indicating that this electrode is a reversible electrode and can be used in conductivity studies by voltammetric analysis. The physical properties of the new electrode GP have good hardness, insolubility, and stability at different high temperatures and at different pH. Also, the sensitivity under conditions of cyclic voltammetry is significantly dependent on pH, electrolyte, and scan rate. At different scan rates, two oxidation peaks and two reduction peaks of Fe(III) were observed in a reversible process: Fe(III) Fe(II), and Fe(II) Fe(0). Interestingly, the redox reaction of Fe(III) solution using GPE remained constant even after 15 cycles. It is therefore evident that the GPE possesses some degree of stability. The potential use of the grafted polymer as a useful electrode material is therefore clearly evident.     

聚L-谷氨酸苄酯固定相的制备及色谱评价

利用L-谷氨酸苄酯开环聚合得到聚L-谷氨酸苄酯,对其进行表征,将聚L-谷氨酸苄酯溶于四氢呋喃后涂敷在3-氨丙基三乙氧基硅胶上制得液相色谱固定相,研究了正相色谱条件下聚L-谷氨酸苄酯涂敷型固定相对9种位置异构体及10种手性化合物的拆分能力。以不同比例的正己烷/异丙醇为流动相,有6种位置异构体(o,m,p-氯苯胺、o,m,p-溴苯胺、o,m,p-碘苯胺、o,m,p-硝基苯胺、o,m,p-二硝基苯和o,m,p-苯二胺)和4种手性化合物(1-(对氯苯基)乙醇、5-二硝基-N-(1-苯乙基)苯甲酰胺、华法林和四咪唑)得到不同程度的拆分,表明聚L-谷氨酸苄酯涂敷型固定相对位置异构体具有较好的识别作用,同时也表现出良好的手性拆分能力。     

Stretchable Perovskite Solar Cells with Recoverable Performance

Perovskite solar cells (PSCs) are a promising photovoltaic technology for stretchable applications because of their flexible, light‐weight, and low‐cost characteristics. However, the fragility of crystals and poor crystallinity of perovskite on stretchable substrates results in performance loss. In fact, grain boundary defects are the “Achilles’ heel” of optoelectronic and mechanical stability. We incorporate a self‐healing polyurethane (s‐PU) with dynamic oxime–carbamate bonds as a scaffold into the perovskite films, which simultaneously enhances crystallinity and passivates the grain boundary of the perovskite films. The stretchable PSCs with s‐PU deliver a stabilized efficiency of 19.15 % with negligible hysteresis, which is comparable to the performance on rigid substrates. The PSCs can maintain over 90 % of their initial efficiency after 3000 hours in air because of their self‐encapsulating structure. Importantly, the self‐healing function of the s‐PU scaffold was verified in situ. The s‐PU can release mechanical stress and repair cracks at the grain boundary on multiple levels. The devices recover 88 % of their original efficiency after 1000 cycles at 20 % stretch. We believe that this ingenious growth strategy for crystalline semiconductors will facilitate development of flexible and stretchable electronics.     

Enantioselective three-component Ugi reaction catalyzed by chiral phosphoric acid

A catalytic enantioselective three-component Ugi reaction was developed. SPINOL-derived phosphoric acid with bulky 2,4,6-tricyclohexylphenyl groups at the 6,6′ positions was found to be the best catalyst to afford α-amino amide derivatives in good to excellent yields(62% to 99%) and enantiocontrol(81% to 99% enantiomeric excess). This asymmetric reaction was applicable well to an array of aliphatic aldehydes. The gram-scale synthesis, modification of dapsone, and enantioselective synthesis of(R)-Lacosamide underline the general utility of this methodology. Influence of dihedral angles and substituents of the chiral phosphoric acids on the enantioselectivity was also discussed in this article.     

Aromatic polyamides containing keto-benzocyclobutene pendants

A series of novel benzocyclobutene (BCB)-pendanted polyamides (inherent viscosities: 0.20–0.69 dL/g) was synthesized from 3,5-diaminophenyl-4-benzocyclobutenyl ketone, and terephthaloyl, isophthaloyl, 4,4′-oxydibenzoyl chlorides, as well as 4,4′-(o-phenylenedioxy)dibenzoyl chloride. The DSC studies demonstrated that the BCB crosslinking exothermic transition occurred at nearly the same temperature (max. ∼︁ 275°C) for all the four polyamides, and they were thermally stable up to 380°C in helium, where the weight loss started to occur. TGA and DSC studies in air indicated that the polymers, in contrast to the model compound, showed evidence of oxidation just prior to or occurring simultaneously with the BCB crosslinking reaction. This could be attributed to the oxidation of the reactive diene generated from the ring-opening of the BCB competing with the process of two BCB pendant units approaching each other for crosslinking reaction. Preliminary examination of the BCB-pendanted polyamide regenerated from a methanesulfonic acid solution indicates that the BCB ring is quite stable (DSC evidence) in the strong acid medium. © 1996 John Wiley & Sons, Inc.     

Phase behavior in mixtures of a homopolymer and a block copolymer. 4. SALS and SAXS studies

Phase behavior of blends of poly(vinyl methyl ether) (PVME) with four styrene-butadiene-styrene (SBS) triblock copolymers, being of various molecular weights, architecture, and compositions, was investigated by small-angle light scattering. Small-angle X-ray scattering investigation was accomplished for one blend. Low critical solution temperature (LCST) and a unique phase behavior, resembling upper critical solution temperature (UCST), were observed. It was found that the architecture of the copolymer greatly influenced the phase behavior of the blends. Random phase approximation theory was used to calculate the spinodal phase transition curves of the ABA/C and BAB/C systems; LCST and resembling UCST phase behavior were observed as the parameters of the system changed. Qualitatively, the experimental and the theoretical results are consistent with each other. © 1996 John Wiley & Sons, Inc.     

A novel region feature used in multisensor image fusion

A new region feature which emphasized the salience of target region and its neighbors is proposed. In region segmentation-based multisensor image fusion scheme, the presented feature can be extracted from each segmented region to determine the fusion weight. Experimental results demonstrate that the proposed feature has extensive application scope and it provides much more information for each region. It can not only be used in image fusion but also be used in other image processing applications.     

基于THz-TDR的芯片金属微带线缺陷检测

针对体积小、走线密集、集成度高的封装芯片缺陷检测,目前的主要检测手段存在精度低、周期长等缺点。为弥补传统检测方法的不足,作者结合太赫兹技术与时域反射技术,探究对芯片上金属导线缺陷检测的可行性。首先在不同宽度的金属微带线上加工了不同比例的凸起、凹槽缺陷,模拟集成芯片中金属导线的不完全开/短路等阻抗不匹配情况,利用太赫兹时域反射计采集其时域反射信号。然后根据时域反射脉冲对应的时间分别对不同缺陷程度、不同缺陷类型进行定性分析,并精确计算出了芯片上金属微带线的缺陷位置。最后利用有限元分析法对硅基底上存在缺陷的金属微带线进行仿真分析,与实验结果具有良好的一致性。该研究表明,太赫兹技术与时域反射技术结合能够实现对芯片上金属导线缺陷的诊断检测,为集成芯片的缺陷检测提供了经验参考。     

Unraveling the reactivity of a cationic iminoborane: avenues to unusual boron cations

A cationic terminal iminoborane [Mes*N B ← IPr₂Me₂][AlBr₄] (3⁺[AlBr₄]⁻) (Mes* = 2,4,6-tri-tert-butylphenyl and IPr₂Me₂ = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene) has been synthesized and characterized. The employment of an aryl group and N-heterocyclic carbene (NHC) ligand enables 3⁺[AlBr₄]⁻ to exhibit both B-centered Lewis acidity and BN multiple bond reactivities, thus allowing for the construction of tri-coordinate boron cations 5⁺–12⁺. More importantly, initial reactions involving coordination, addition, and [2 + 3] cycloadditions have been observed for the cationic iminoborane, demonstrating the potential to build numerous organoboron species via several synthetic routes.

An NHC-stabilized aryliminoboryl cation exhibits both boron-centered Lewis acidity and multiple bond reactivity and could be utilized as an effective synthon for unusual cationic boron species.