Dependence of the efficiency-bandwidth product on electrical volumeof small dielectric loaded antennas

The efficiency fractional efficiency bandwidth product (EB) that is expressed as a ratio of the radiation resistance to the absolute value of an input reactance of an antenna is used as a performance measure for small dielectric-loaded monopole antennas (DLMAs). The dependence of the efficiency bandwidth (EB) on the permittivity of the dielectric loading (i.e., the electrical volume) is experimentally investigated for the first time after we succeeded in measuring the small radiation resistance of the DLMAs precisely on the basis of the Wheeler cap method. As a result, it was found that the EBs of some DLMAs were enhanced over a bare monopole antenna and an EB characteristic curve has a maximum point. This result suggests the presence of the optimum electrical volume for the dielectric loading in order to obtain the best EB performance. A calculation by the finite-difference time-domain (FDTD) method was also conducted to confirm the presence of the maximum EB value under a certain condition. A general reason for the existence of the peak value is also explained using a mathematical deduction     

Inductively-coupled plasma/atomic emission spectrometry of sulfur with a vacuum scanning spectrometer and its application to the analysis of coal liquefaction catalysts

Inductively-coupled plasma/atomic emission spectrometry with a high-resolution vacuum scanning monochromator is described for the determination of sulfur at 180.734 nm. The behavior of the signal-to-background ratio is investigated as functions of RF power, argon gas flow rate and observation height above the load coil. Under the operating conditions selected, the detection limit is 3 μg l^?1. The Se I 196.090-nm line is chosen as internal standard, because the S/Se line pair exhibited the least change with carrier gas flow rate and acid concentration of solution. Sulfur in NiMo and CoMo/ Al₂O₃ catalysts used for coal liquefaction is determined as S(II) and S(VI) species. The total amount of the species agreed well with the sulfur value obtained by the conventinal combustion method.     

Influence of nonionic emulsifier included inside carboxylated polymer particles on the formation of multihollow structure by the alkali/cooling method

The influence of nonionic emulsifier, included inside styrene-methacrylic acid copolymer [P(S-MAA)] particles during emulsion copolymerization, on the formation of multihollow structure inside the particles via the alkali/cooling method (proposed by the authors) was examined in comparison to emulsifier-free particles. It was clarified that the nonionic emulsifier included inside the P(S-MAA) particles eased the formation of multihollow structure.Part CCL of the series studies on suspension and emulsion     

Rapid ruthenium-catalyzed synthesis of pyranopyrandiones by reconstructive carbonylation of cyclopropenones involving C[bond]C bond cleavage

Pyranopyrandiones were prepared by a novel ruthenium-catalyzed carbonylative dimerization of cyclopropenones via C-C bond cleavage. For example, treatment of dipropylcyclopropenone with a catalytic amount of Ru3(CO)12 and NEt3 in THF under 15 atm of carbon monoxide at 140 degrees C for 20 h gave a novel functional monomer, 3,4,7,8-tetrapropylpyrano[6,5-e]pyran-2,6-dione, in an isolated yield of 81%. Unsymmetrically substituted pyranopyrandiones were also obtained by ruthenium-catalyzed carbonylative coupling of cyclopropenones with alkynes under similar reaction conditions.     

Effects of various thiol molecules added on morphology of dendrimer-gold nanocomposites

Interactions between poly(amidoamine) dendrimer (PAMAM)-gold nanocomposites and alkanethiols and between the former nanocomposites and thiol-modified poly(amidoamine) dendrons in ethyl acetate were investigated by adding alkanethiols, such as 1-propanethiol and 1,3-propanedithiol, and thiol-modified poly(amidoamine) dendrons, generations 0.5 and 2.5 (G0.5-SH and G2.5-SH). The PAMAM dendrimers with surface methyl ester groups used were generations 1.5 and 5.5 (G1.5 and G5.5). The mean particle sizes of PAMAM-gold nanocomposites were about 2.1 for G1.5 and 2.4 nm for G5.5. In both nanocomposite systems where 1-propanethiol and 1,3-propanedithiol were added, the mean particle size was about 4 nm, twice that of the systems where these thiols were not added. Increasing the addition of 1,3-propanedithiol made the average particle size smaller for both nanocomposites systems. To compare with alkanethiol, thiol-modified poly(amidoamine) dendron with a highly branched structure on one side was synthesized. Using G2.5-SH as a protective agent, dendron-gold nanocomposites with mean diameters of 3 to 4 nm were obtained. The difference in particle size was seen only when the combination of PAMAM-gold nanocomposites and thiol-modified dendron was less sterically dense, modified dendron (G0.5-SH). The mechanisms for morphology changes in the dendrimer-gold nanocomposites by the addition of these thiols are discussed.     

FLAVIN-PHOTOSENSITIZED MONOMERIZATION OF DIMETHYLTHYMINE CYCLOBUTANE DIMER IN THE PRESENCE OF MAGNESIUM PERCHLORATE

We have investigated the photosensitized monomerization of the cis,syn -cyclobutane dimer of 1,3-di-methylthymine using riboflavin tetraacetate and a 5-deazaflavin derivative as photosensitizer. Although little monomerization of the dimer is induced by photoexcitation of the flavins in the absence of any additives, the flavins can function as an efficient photosensitizer in the presence of magnesium perchlorate. Mechanistic studies involving spectroscopic, quantum-yield and flash-photolysis measurements demonstrated that the photosensitized monomerization exclusively proceeds through electron transfer from the dimer to the triplet flavins complexed with Mg²⁺. The effects of magnesium perchlorate are compared with those on the chloranil-photosensitized monomerization and also with the effects of HClO₄ on the flavin-photosensitized reaction.     

Synthesis, stereochemistry, and circular dichroism of optically active o-substituted diphenyl sulphilimines and related compounds

Optically active o-substituted diphenyl N-substituted sulphilimines are readily synthesised by the reaction of the corresponding sulphides and t-butyl hypochlorite in the presence of l-menthol and amide anions. (−)-N-p-Tolylsulphonylsulphilimines (1, 2) obtained were converted to the corresponding (−)-N-unsubstituted sulphilimines (8, 9) by treating them with concentrated sulphuric acid. When (−)-S-o-anisyl S-phenyl N-(unsubstituted) sulphilimine (8) was treated with acylating agents or acrylonitrile, the corresponding optically active (−)-N-substituted sulphilimines were prepared with complete retention at sulphur. The absolute configuration of (−)-S-o-anisyl S-phenyl N-p-tolylsulphonylsulphilimine (1) was determined by converting it to (+)-S-o-anisyl sulphoxide (17). CD curves of (−)-o-substituted diarylsulphilimines exhibited a negative Cotton effect at around 270–285 nm, which was assigned to (S)-configuration at sulphur by comparing with the analogous sulphoxides. The substituent on the imino group of the sulphilimine gave no appreciable effect on the CD behavior and the lack of substituent effect was considered to be due to the semi-polar character of the S(IV)-N bond. Unusual effect of o-methoxy group on the CD curves was discussed in connection with solvent effect. Mechanism of this asymmetric synthesis has been investigated, and it has become apparent that the diastereomeric menthoxysulphonium chloride was an excess of (RR)-configuration was formed initially and the amide anion attacks the S atom of the salt with net inversion.     

Scale-up of high shear granulation based on the internal stress measurement

Scale-up of wet granulation in a vertical high shear mixer was conducted. Pharmaceutical excipient powders composed of lactose, cornstarch and micro-crystallinecellulose, and hydroxypropylcellulose as a binder were mixed together and then granulated with purified water under various operating conditions and vessel scales. A novel internal stress measurement system was developed and stress of normal and tangential directions that granules received from the agitator blade during the granulation was continuously measured. The results indicated that granules received stress mainly from the tangential direction, which also showed the largest value near at the vessel wall. The effects of the agitator tip speed and the centrifugal acceleration on the measured stress was investigated. It was found that the tip speed of the agitator blade could be the main factor for the granule growth. The physical properties such as strength, size distribution and compressibility of granules prepared by changing the operating conditions and the vessel scales were evaluated and the scale-up characteristics of high shear granulation were investigated experimentally. The results showed that these physical properties had linear correlations with the tip speed. It was finally concluded that the scale-up of high shear granulation could be well conducted by means of the tip speed of the agitator blade.