Encapsulation of ZnS:Mn2+ nanocrystals with diblock copolymers

The encapsulation of the nanocrystalline manganese‐doped zinc sulfide (ZnS:Mn) in poly(styrene‐b‐2vinylpyridine) (PS‐PVP) diblock copolymers is reported. Below the critical micelle concentration in the absence of nanocrystals (NCs), inverse micelles of PS‐PVP were induced by adding ZnS:Mn NCs, the presence of which was confirmed by scanning force microscope and dynamic light scattering. In toluene, a PS‐selective solvent, the less‐soluble PVP blocks preferentially surround the ligand‐coated ZnS:Mn NCs. For PS‐PVP encapsulated ZnS:Mn NCs, the ratio of blue emission to orange emission of ZnS:Mn NCs is dependent on both the concentration of PS‐PVP and the solvent quality. The pyridine of PVP blocks form complexes with the Zn atoms via the nitrogen lone pair and thus the sulfur vacancies are passivated. As a result, the defect‐related blue emission is selectively quenched even when the micelles are not formed. As the concentration of PS‐PVP encapsulating the ZnS:Mn NCs increases, the intensity of blue emission decreases. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3227–3233, 2006     

3-Aroylmethyl derivatives of 2(1H)quinoxalinone and 2H-l,4-benzoxazin-2-ones existing in the enamine form

Seventeen derivatives of 2(1H)quinoxalinone and 2H-l,4-benzoxazin-2-one have been synthesized for structural study. All of the compounds having a substituted phenacyl, isonicotinoylmethyl, or 2-furoylmethyl side chain are shown to exist in the enamine form with an internal chelation both in the crystalline and solution states as evidenced by the ir and pmr spectra, respectively. In the gas phase, however, o-hydroxyphenacyl derivatives can exist in another type of intramolecularly hydrogen-bonded form which is supported by their mass spectra.     

Radiation-induced heterogeneous polymerization of acrylamide in acetone and acetone–water mixtures

The effects of temperature, dose rate, and monomer concentration on the heterogeneous polymerization of acrylamide in acetone–water mixtures have been studied. Heterogeneous polymerization takes place in mixtures containing less than 60 vol-% water. The polymerization is steady in acetone and nonsteady in acetone an nonsteady in mixtures containing 10–50 vol-% water. The average rate of polymerization is highest in mixtures with about 20 vol-% water. Polymer molecular weight increases with the increasing water content in range 0–10 vol-% and does not change in the range of 30–70 vol-% water. For the polymerization in acetone and an acetone–water 60/40 mixture the activation energies are 2.3 and ?1.8 kcal/mole, the dose rate exponents of rate are 0.78 and 0.52, and the monomer concentration exponents of rate are 0.5 and 1.6, respectively. The polymer molecular weight increases with decreasing dose rate, decreasing temperature, and increasing monomer concentration. These results are discussed in connection with the mechanism of heterogeneous polymerization and the solvent effect.     

Effects of trivalent phosphorus compounds on vinyl polymerizations—VII. A nonstationary state radical polymerization of methylmethacrylate in the presence of phenyldichlorophosphine

In the radical polymerization of methylmethacrylate in the presence of p-phenyldichlorophosphine, the initial rate and degree of polymerization increased with polymerization time. They first decreased with increase in the phosphine concentration but increased with further increase in the phosphine concentration. Termination was first order with respect to the initiator. The degree of polymerization was independent of the initiator concentration, but dependent on the conversion. The polymer contained no phosphorus units regardless of the phosphine concentration. The ESR spectra of system showed existence of a phosphorus radical. In order to explain these characteristics of the polymerization, it is proposed that there may be a nonstationary state in which the polymer radicals are regenerated during the polymerization from the phosphoranyl radicals.     

A novel scheme of heterogeneous polymerization of ethylene

The heterogeneous polymerization of ethylene initiated by radiation in tert-butyl alcohol was studied. The polymerization was carried out in a 100-ml reactor at 25–100°C and pressures of 200–300 kg/cm² in the presence of 50 ml of tert-butyl alcohol containing 7 wt-% water. The amounts of polymerized monomer, the average molecular weight of polymer formed, and the molecular weight distribution of polymer were measured at various stages of reaction and at various temperatures. The molecular weight distribution was found to be very much dependent on the reaction time and temperature. For the polymer formed at 50–60°C in the very early stages of reaction, the molecular weight distribution is unimodal, and in the intermediate stage a shoulder appears at a molecular weight higher than the first peak which increases as the polymerization proceeds; eventually a bimodal curve is formed. The bimodal distribution curves were analyzed to determine the fractions and average molecular weights of the each peak. On the basis of these data for the molecular weight distribution and kinetic behavior, a new scheme for the heterogeneous polymerization is proposed which indicates that the polymerization proceeds via propagating radicals in two different physical states, namely, loose and rigid states.     

Emulsifier-free emulsion polymerization of tetrafluoroethylene by radiation. I. Effects of reaction conditions on the polymerization rate and polymer molecular weight

The radiation-induced emulsifier-free emulsion polymerization of tetrafluoroethylene was carried out at an initial pressure of 2–25 kg/cm², temperature of 30–110°C, and under a dose rate of 0.57 × 10⁴?3.0 × 10⁴ rad/hr. The rate of polymerization was shown to be proportional to 1.0 and 1.3 powers of the dose rate and initial pressure, respectively, and is maximal at about 70°C. The molecular weight of polytetrafluoroethylene (PTFE) lies in the range of 10⁵?10⁶, increases with reaction time in the early stage of polymerization, and is maximal at 70°C but is almost independent of the dose rate. An interesting discovery is that PTFE, a hydrophobic polymer, forms as a stable latex in the absence of emulsifier. When PTFE latex coagulates during polymerization under certain conditions, the polymerization rate decreases, probably because polymerization proceeds mainly on the polymer particle surface. The observed rate acceleration and successive increase in polymer molecular weight may be due to slow termination of propagating radicals in the rigid PTFE particles.     

Electrostatic interaction between ion-penetrable membranes in a salt-free medium

A set of coupled equations is given which determines the distributions of the electric potential and counterions in a system of two interacting identical ion-penetrable membranes of thickness d at separation h immersed in a salt-free medium containing only counterions. The solution to these coupled equations also gives the electrostatic repulsive force between the membranes. It is shown that the interaction force remains finite at h-->0, unlike the case of the interaction between two planar charged surfaces (d-->0), and that the interaction force becomes independent of the membrane fixed charge and membrane thickness d at very large h. Finally, an approximate single transcendental equation giving the solution to the coupled equations is derived.     

Photo-induced dimerization of 1-naphthoxide anion: Electron transfer mechanism

Irradiation of sodium 1-naphthoxide in MeOH gave selectively 1,4-dihydro-4',8-dihydroxy-1,1'-binaphthyl 2. A similar reaction in PhH afforded the regioisomer 5, along with 6, Structural proof is presented for these hitherto unknown dimers. The reaction is completely quenched in the presence of naphthalene, a good electron scavenger. This new type of photodimerization was proved to be initiated by intermolecular electron-transfer from the excited 1-naphthoxide anion to the ground state one to give the oxidation-reduction dimers.