Mono-aromatic ring-fused versus adjacently di-aromatic ring-fused tetraazaporphyrins: regioselective synthesis and their spectroscopic and electrochemical properties

A method which preferentially produces adjacently di-aromatic ring-substituted tetraazaporphyrins (TAPs) has been developed, and their electrochemical and spectroscopic properties have been studied and compared with those of the corresponding series of mono-aromatic ring-fused TAPs. Mono-aromatic ring-fused TAPs show a split Q-band, and the splitting energy increases with increasing size of the aromatic ring. In addition, for the split Q-bands, the relative intensity of the band at longer wavelength decreases with increasing molecular size of the fused aromatics, compared with the shorter wavelength band. In the di-aromatic ring-fused TAPs, this kind of splitting is not seen, and only a shift of the band is observed. The intensity and band position of the split or unsplit Q-bands are quantitatively evaluated by simultaneous band deconvolution analysis, using both electronic absorption and magnetic circular dichroism spectra. The preparation of these TAP compounds has made it possible to adjust the Q-band position in a stepwise manner between ca. 600 and 750 nm. The first reduction and oxidation potentials of the TAP ring shift negatively with increasing number and size of the fused aromatics. The extent of the shift is found to be very small for the LUMOs but significant for the HOMOs. These spectroscopic and electrochemical properties are almost perfectly reproduced by molecular orbital calculations within the framework of the Pariser-Parr-Pople approximation. In particular, a small variation of the LUMO level and large destabilization of the HOMO level on ring expansion are rationalized from the extent of stretch of molecular orbitals: i.e., since the LUMOs are localized in the central TAP moiety irrespective of the molecular size, while the HOMOs have appreciable coefficients even over the fused aromatics, the HOMO level destabilizes while the LUMO level remains constant with increasing molecular size. In one CoTAP derivative, Co(III/II) and the first ligand oxidation couples occur experimentally at the same potential.     

Novel real-time sensors to quantitatively assess in vivo inositol 1,4,5-trisphosphate production in intact cells

Real-time observation of messenger molecules in individual intact cells is essential for physiological studies of signaling mechanisms. We have developed a novel inositol 1,4,5-trisphosphate (IP(3)) sensor based on the pleckstrin homology (PH) domain from phospholipase C (PLC) delta. The environmentally sensitive fluorophore 6-bromoacetyl-2-dimethyl-aminonaphtalene was conjugated to the genetically introduced cysteine at the mouth of the IP(3) binding pocket for enhanced IP(3) selectivity and for rapid and direct visualization of intracellular IP(3) > or = 0.5 microM as fluorescence emission decreased. The probe, tagged with arginine-rich sequences for efficient translocation into various cell types, revealed a major contribution of Ca2+ influx to PLC-mediated IP(3) production that boosts Ca2+ release from endoplasmic reticulum. Thus, our IP(3) probe was extremely effective to quantitatively assess real-time physiological IP(3) production via those pathways formed only in the intact cellular configuration.     

Simultaneous determination of sulfamethoxazole and trimethoprim in human plasma by capillary zone electrophoresis

A capillary electrophoretic method for the simultaneous determination of sulfamethoxazole and trimethoprim in plasma was developed. Sulfamethoxazole and trimethoprim extracted from human plasma with ethyl acetate were analyzed at 20 kV and 25 degrees C using 15 mm phosphate buffer (pH 6.2) as the electrolyte. The detection was by UV at 220 nm. The run time was 8.0 min and the limit of quantification was 10.00 microg/mL for sulfamethoxazole and 2.00 microg/mL for trimethoprim. The recovery was >99% for both compounds. This method enabled the detection of sulfamethoxazole and trimethoprim in plasma of patients after oral ingestion of their combined formulation. The present simple and rapid method is applicable to drug monitoring in immunocompromised patients who are taking the combined formulation of these compounds for the treatment or prophylaxis of Pneumocystis carinii pneumonia.     

In situ monitoring of metal nanoparticle self-assembly on protein-functionalized glass by broadband optical waveguide spectroscopy

Broadband, time-resolved optical waveguide (OWG) spectroscopy has been used for in situ, real-time investigation into the self-assembly of metal nanoparticle monolayers. The OWG spectroscopy makes it possible to use the transverse electric (TE) and transverse magnetic (TM) modes to measure surface plasmon absorption of immobilized metal nanoparticles in two directions, parallel and normal to the waveguide surface. Therefore, this technique can provide direction-dependent information on the metal nanoparticles at the interface. In this paper, a 50-microm-thick glass plate was used as a slab waveguide and the kinetics of Au nanoparticle adsorption on a hemoglobin-functionalized glass substrate was examined in the early stage of self-assembly. The findings show that with the TE mode the surface plasmon resonance (SPR) behavior for immobilized Au nanoparticles is different from that with the TM mode.     

Effect of moisture on impact toughness of sugar-coated tablets manufactured by the dusting method

The purpose of this study was to clarify the effect of moisture on the impact toughness of sugar-coated tablets manufactured by the dusting method. We demonstrated that moisture plays an important role in the impact toughness of sugar-coated tablets. Moisturizing the sugar-coating layer resulted in enhancement of impact toughness of sugar-coated tablets, while reducing moisture in the sugar-coating layer resulted in weakening of the impact toughness. This was due to the characteristics of sucrose, the main ingredient of the sugar-coating layer, which is a soft and non-fragile material at high moisture levels, but hard and fragile at low moisture levels. We also demonstrated that friability as an indicator of impact toughness changed with time, and friability should be measured at 14 d after manufacture. This is due to moisture movement from outer sugar-coating layer into the inner sugar-coated tablets. Incorporating microcrystalline cellulose (MCC) in the subcoating layer resulted in sugar-coating layers with high resistance against impact even though moisture content of sugar-coated tablets was low. We confirmed the high impact toughness of the sugar-coated tablets with MCC whose moisture content was low from the results of both free fall and friability tests. We suggest that the dusting method using dusting powder containing MCC is a useful method for the production of sugar-coated tablets containing moisture sensitive drugs.     

Total synthesis of myceliothermophins A-E

Total synthesis of an antitumor compound myceliothermophin A and related compounds based on a convergent synthetic strategy was investigated. A common decalin skeleton of myceliothermophins was stereoselectively constructed by an IMDA reaction. The fully elaborated precursor of myceliothermophins was obtained via aldol reaction of N-protected γ-methoxylactam with decalin aldehyde. By using Teoc group for the protection of nitrogen atom of lactam ring, selective deprotection prior to the hydrolysis of methoxyaminal moiety was successfully achieved to obtain γ-methoxylactams (myceliothermophins C and D). Subsequent hydrolysis of these compounds afforded the corresponding γ-hydroxylactam, and myceliothermophins A and B in high yield. Myceliothermophin E was also synthesized by dehydration of the obtained γ-hydroxylactams. The absolute configurations of myceliothermophins A-E were also successfully determined.     

Visualizing Hepatic Copper Release in Long–Evans Cinnamon Rats Using Single-Photon Emission Computed Tomography

The potential utility of an imaging agent for the detection of hepatic copper was investigated in a Wilson’s disease animal model. Solid-phase peptide synthesis was used to construct an imaging agent which consisted of a copper-binding moiety, taken from the prion protein, and a gamma ray-emitting indium radiolabel. Long–Evans Cinnamon (LEC) rats were used for the Wilson’s disease animal model. Our evaluation methodology consisted of administering the indium-labeled agent to both LEC and genetically healthy Long–Evans (LE) cohorts via a tail vein injection and following the pharmacokinetics with single-photon emission computed tomography (SPECT) over the course of an hour. The animals were then sacrificed and their livers necropsied. An additional control agent, lacking the copper-binding moiety, was used to gauge whether any change in the hepatic uptake might be caused by other physiological differences between the two animal models. LEC rats injected with the indium-labeled agent had roughly double the amount of hepatic radioactivity as compared to the healthy control animals. The control agent, without the copper-binding moiety, displayed a hepatic signal similar to that of the control LE animals. Additional intraperitoneal spiking with CuSO₄ in C57BL/6 mice also found that the pharmacokinetics of the indium-labeled, prion-based imaging agent is profoundly altered by exposure to in vivo pools of extracellular copper. The described SPECT application with this compound represented a significant improvement over a previous MRI application using the same base peptide sequence.     

Transformation of peptide nanotubes into a vesicle via fusion driven by stereo-complex formation

Two types of peptide nanotubes, one is prepared from an amphiphilic peptide having a right-handed helix segment and the other from that having a left-handed helix segment, are shown to transform the morphology into a vesicle by membrane fusion due to stereo-complex formation between these helical segments.     

Sustained-release phenylpropanolamine hydrochloride bilayer caplets containing the hydroxypropylmethylcellulose 2208 matrix. II. Effects of filling order in bilayer compression and manufacturing method of the prolonged-release layer on compactibility of bilayer caplets

The purpose of this study was to establish the manufacturing method of the formulated bilayer caplets containing the hydroxypropylmethylcellulose 2208 (HPMC2208) matrix without lamination. In manufacturing the bilayer caplets containing the HPMC2208 (Metolose 90SH4000) matrix, some bilayer caplets were cracked. We found that cracking of bilayer caplets is not the separation of two layers, but lamination of the prolonged-release layer. It was assumed that Metolose 90SH4000 causes lamination of the prolonged-release layer. Two factors, roller compaction pressure on dry granulation of the prolonged-release layer and filling order of the prolonged-release layer in bilayer compression, were related to lamination of bilayer caplets. The compactibility of the prolonged-release layer decrease with an increase in roller compaction pressure on dry granulation. The compactibility of the prolonged-release layer manufactured by direct compression is superior to that manufactured by dry granulation. The compactibility of the prolonged-release layer in the shape of the second layer, convexo-concave, is superior to that in the shape of the first layer, convexo-convex. This is due to the fact that the density distribution inside the compact in the shape of convexo-concave was more uniform than that in the shape of convexo-convex. The manufacturing method of the formulated bilayer caplets having the prolonged-release layer whose Metolose 90SH4000 content is 60% without lamination is as follows: the prolonged-release layer manufactured by direct compression is fed as the second layer in bilayer compression.     

Efficient preparation of amine-modified oligodeoxynucleotide using modified H-phosphonate chemistry for DNA microarray fabrication

Amine-modified oligodeoxynucleotides (AMO) are commonly used probe oligodeoxynucleotides for DNA microarray preparation. Two methods are currently used for AMO preparation—use of amine phosphoramidites protected by acid-labile monomethoxytrityl (MMT) groups or alkali-labile trifluoroacetyl (TFA) groups. Because conventional AMO preparation procedures have defects, for example stringent acidic conditions are required for deprotection of MMT and hydrophobic purification cannot be used for TFA-protected amino groups, conventional preparation of AMO is unlikely to result in the expected outcome. In this paper a method of AMO synthesis using modified H-phosphonate chemistry is suggested. An aliphatic diamine is coupled with a phosphonate group forming a phosphoramidate linkage to the last internucleotide phosphate of oligodeoxynucleotides. In this method dimethoxytrityl (DMT) purification steps are used and stringent acid deprotection is not required to obtain the AMO. Although the method could lead to formation of AMO diastereomers, melting-temperature and CD analysis showed for two AMO that DNA duplex formation was the same as when normal oligodeoxynucleotides were used. Also, when these AMO were used as probes for DNA microarrays the immobilization efficiency was similar to that for AMO probes prepared by conventional means using an amino-modifier unit. The hybridization performance of these AMO was better than for those prepared conventionally. The procedures suggested would be useful for preparation of efficient AMO for fabrication of DNA microarrays and DNA-based nanoparticle systems. Nagendra Kumar Kamisetty and Seung Pil Pack have equally contributed to this work.