Absorption Complex between Porphyrin and Phenothiazine in Reverse Micelles

Porphyrin derivatives attract much more interest in photodynamic therapy (PDT). Their importance as therapeutic drugs and targeting agents has been widely recognized1, and many of the efforts have been put towards crafting new porphyrin-based molecular entities to achieve enhanced tumor localization, better tissue penetration and increased singlet oxygen quantum yield2. The states of porphyrins in tissue models such as micelles, lipid bilayers are extensively investigated focusing more or l…     

拟南芥胚的不同区域对MeV离子辐照的响应

利用不同能量的质子在大气环境中辐照拟南芥的含水种子，能量从1.1MeV到6.5MeV.根据模拟计算结果，相应能量的离子对种子的损伤区域分别为胚的浅层、胚的一半和整个胚.本实验中，具有较高能量的质子可以完全均匀地作用于拟南芥生长、发育及遗传密切相关的胚茎端分生组织，而能量较低的质子则不能直接作用于茎端分生组织.实验所用质子注量范围为4×10⁹ions/cm²—1×10¹⁴ions/cm².实验结果显示，虽然拟南芥种子的发芽率和幼苗存活率随离子注量增加都呈现下降的趋势，但对应于不同的胚损伤区域，即在不同的入射质子能量条件下，注量曲线具有各自的特征.实验结果显示，拟南芥种子中除了胚茎端分生组织作为对离子辐照敏感的辐射主靶外，茎端分生组织之外的胚区域可能作为离子辐射次靶，影响到最终的辐射生物学效应. 关键词： 离子辐照 拟南芥 胚区域 生物效应     

长脉冲激光沉积原位生成YBaCuO超导膜

用长脉冲激光(脉冲宽度150μs,波长1.06μm)辐照高温烧结的YBa_2Cu_3O_(7-x)靶,在6Pa的氧气压强下,巳在(100)YSZ单晶衬底上原位生成YBa_2Cu_(?)O_(7-x)超导膜。衬底置于750℃的加热器上,衬底与靶之间的距离5cm,用该法制得的薄膜光亮坚实,正常态呈金属性,零电阻温度为84.7K。用XRD和SEM对薄膜进行了分析研究。     

50W CO_2激光雕刻机控制系统

介绍非金属材料表面加工的CO2激光雕刻机的基本原理其控制系统。     

新颖的PPLN电光开关

在分析基于级联二阶非线性效应的准相位匹配周期极化铌酸锂(PPLN)波导全光波长变换器的有关参量容限的基础上,提出PPLN波长变换器的电光调控设想,并给予简要论证,论证结果是可行的,从而可实施电控调谐来自动补偿其失配,进而也可实现光开关的功能 关键词： 准相位匹配 周期极化铌酸锂 波长变换 光开关 电光效应调控     

遮掩式低回波金属支架的设计

本文推出了一种具有固定遮掩屏的低ＲＣＳ金属支架系统；介绍了其主要特点及设计方法；计算了该支架了多种数学模型的散射截面分布；试验研究了优化支架模型的散射特性。本文的计算及试验结果对于设计制做产用回波金属目标支架具有重要的参照价值。     

3mm波段极近距离雷达

提出一种极近距离雷达概念，并导出其作用距离公式，在此基础上研制出一台３ｍｍ波段极近距离多普勒雷达样机．试验结果表明该雷达结构简单，成本低廉，在作用距离为零点几米至几米范围内可获得较高的定距精度．     

生长条件对KDP晶体中散射颗粒的影响

利用透射电子显微技术对不同条件下生长的KDP晶体中包裹物进行了观察并测量了其相应尺寸。结果表明，晶体中的生长缺陷、pH值、生长速度和杂质与KDP晶体散射颗粒的形态存在密切关系。     

强耦合表面磁极化子的基态能量和有效质量

采用Landau-Pekar变分理论研究强耦合表面磁极化子的性质。分别计算了强耦合表面磁极化子的基态能量和有效质量，并讨化了表面磁极化子的基态能量，振动频率和有效质量随磁场的变化关系。对KCL晶体进行了数值计算，结果表明，强耦合表面磁极化子的振动频率和有效质量随磁场的增加而增加，基态能量随磁场的增加而减少。     

Development of Bi(Pb)-2223/Ag pancake-shaped and solenoidal coils

High temperature superconducting (HTSC) multifilamentary (MT) Bi(Pb)-2223/Ag tapes with reproducible critical current density of between 15000 and 20000 A/cm² at 77 K in self field have been achieved using the standard flat-rolling method as the intermediate deformation between sintering periods. Long lengths of Bi(Pb)-2223/Ag MT tapes up to 43 m prepared by the conventional method of powder-in-tube (PIT) have been successfully produced on a laboratory scale. Several coils have been fabricated from sections of the long length tape, using the co-wound wind-and-react (W&R) procedure for the pancake-shaped and the singly-wound W&R as well as R&W procedure for the solenoidal coils. A novel W&R solenoidal coil (reaching ~973 ampere-turns) wound on an alumina ceramic tube generates a DC field of ~19 mT at 77 K and has been fabricated together with five pancake-shaped coils, each generating an average of ~5 mT at 77 K. These are destined for magnet construction with a possible combined calculated field of ~0.04 T at 77 K (with liquid nitrogen as a coolant)