A Low-Hysteresis and Highly Stretchable Ionogel Enabled by Well Dispersed Slidable Cross-Linker for Rapid Human-Machine Interaction

Ionic conductive soft materials for mimicking human skin are a promising topic since they can be thought of as a possible basis for biomimetic sensing. In pursuit of devices with a long working range and low signal delay, conductive materials with low hysteresis and good stretchability are highly demanded. To overcome the challenges of highly stretchable conductive materials with good resilience, herein a chemical design is proposed where polyrotaxanes act as topological cross-linkers to enhance the stretchability by sliding-induced reduced stress concentration while the compatible ionic liquid is introduced as a dispersant for low hysteresis. The obtained ionogels exhibit versatile properties more than low hysteresis (residual strain = 7%) and good stretchability (550%), and also anti-fatigue, biocompatibility, and good adhesion. The low hysteresis is attributed to lower energy dissipation from the well-dispersed polyrotaxanes by compatible ionic liquids. The mechanism provides a new insight in fabricating highly stretchable and low-hysteresis slide-ring materials. Furthermore, the conductivity of the ionogels and their responses to strains and temperatures are measured. Benefiting from the good conductivity and low hysteresis, the ionogel is applied to develop a wireless communication system to realize rapid human-machine interactions.     

High-Efficiency Organic Solar Cells Enabled by Chalcogen Containing Branched Chain Engineering: Balancing Short-Circuit Current and Open-Circuit Voltage,Enhancing Fill Factor

The elaborate balance between the open-circuit voltage (V_OC) and the short-circuit current density (J_SC) is critical to ensure efficient organic solar cells (OSCs). Herein, the chalcogen containing branched chain engineering is employed to address this dilemma. Three novel nonfullerene acceptors (NFAs), named BTP-2O , BTP-O-S , and BTP-2S , featuring different peripheral chalcogen containing branched chains are synthesized. Compared with symmetric BTP-2O and BTP-2S grafting two alkoxy or alkylthio branched chains, the asymmetric BTP-O-S grafting one alkoxy and one alkylthio branched chains shows mediate absorption range, applicable miscibility, and favorable crystallinity. Benefiting from the enhanced π–π stacking and charge transport, an optimal power conversion efficiency (PCE) of 17.3% is obtained for the PM6: BTP-O-S -based devices, with a good balance between V_OC (0.912 V) and J_SC (24.5 mA cm⁻²), and a high fill factor (FF) of 0.775, which is much higher than those of BTP-2O (16.1%) and BTP-2S -based (16.4%) devices. Such a result represents one of the highest efficiencies among the binary OSCs with V_OC surpassing 0.9 V. Moreover, the BTP-O-S -based devices fabricated by using green solvent yield a satisfactory PCE of 17.1%. This work highlights the synergistic effect of alkoxy and alkylthio branched chains for high-performance OSCs by alleviating voltage loss and enhancing FF.     

基于移动信息化的安全接入平台建设

文中旨在提高移动信息化接入的安全级别,确保组织内部服务的安全性和可靠性,在原有网络安全框架的技术基础上,应用一些较为复杂的混合加密技术,建立一个完善的移动信息化安全接入平台,以确保系统安全。为了提高移动信息化的安全性,将其划分为5个类别,并制定了相应的安全政策。如此,原先被控制在内网中的业务系统就能在移动终端上安全地运行。实践证明,该平台可以确保客户身份的安全,增强信息的保密性、完善性、新颖性和不可篡改性,从而保障客户的权益。文中重点关注了移动安全接入平台,并制定了风险安全策略,以应对移动信息化的挑战。     

含氢储能的多源联合发电系统调度研究

风电和光伏发电具有间歇性和随机性,为了降低在多源联合发电系统中的弃风弃光率,采用含氢储能系统和火电机组配合来平滑风电和光电机组出力。文中以系统运行成本最小和弃电惩罚成本最小为目标,以系统功率平衡、火电机组出力和爬坡、热备用、风电和光电出力及储能系统储氢罐容量、电解槽和燃料电池功率等为约束条件构建了多源联合发电系统日前调度模型。通过YALMIP工具箱对模型进行编程,并调用CPLEX对编写的程序进行求解。对含有风电、光电、火电机组以及储能系统的多源联合发电系统进行算例分析,通过对比有无储能系统的弃风弃光量和系统总运行成本,证明了含氢储能系统可以有效降低系统的弃风弃光率,并提高系统的经济性。     

用于超外差接收机提供本振源的高功率510 GHz单片集成三倍频器

本文介绍了一种基于砷化镓材料的高功率490~530 GHz单片集成三倍频器。基于提出的对称平衡结构,该三倍频器不仅可以实现良好的振幅和相位平衡,用来实现高效的功率合成,还可以在没有任何旁路电容的情况下提供直流偏置路径以保证高效倍频效率。同时,开展容差性仿真分析二极管关键电气参数与结构参数对倍频性能的影响研究,以便最大化提升倍频性能。最终,在大约80~200 mW的输入功率驱动下,研制的510 GHz三倍频,在490~530 GHz频率范围内,输出功率为4~16 mW,其中峰值倍频效率11%。在522 GHz频点处,该三倍频在218 mW的输入功率驱动下,产生16 mW的最大输出功率。该三倍频器后期将用于1 THz的固态外超外差混频器的本振源。     

面向植被边坡的地基SAR高相干点选择

基于高相干点进行相位分析,才能有效保证地基SAR（Synthetic Aperture Radar,合成孔径雷达）形变测量的准确性。在差分干涉测量领域中,广泛使用幅度离差法,可以有效地选择出岩石、建筑物等PS（Permanent Scatterer,永久散射体）点作为高相干点,但对于植被边坡,采用该方法选择出高相干点数量较少,不利于差分干涉处理。在星载SAR领域,普遍采用StaMPS方法解决植被边坡的高相干点选择问题。本文探索了StaMPS方法在地基SAR领域的适用性,提出采用非PS点来计算相干系数门限,并引入DS（Distributed Scatterer,分布式散射体）选择技术,进一步提高了高相干点的数量。对一处植被边坡的实验结果表明,相比于幅度离差法和StaMPS方法,改进方法在提高高相干点数量的同时,有效保证了其相位质量。      

A Plug-and-Play,Scalable Control Method for AC Island Microgrid

Wireless Personal Communications - In this paper, a scalable, plug-and-play (PnP) and system-stable synthesis control method is proposed for the AC island microgrid consisting of a distributed...