负色散镜的设计、制备及在掺钛蓝宝石激光谐振腔内的使用

根据钛宝石激光器的要求设计了性能优良的两种负色散镜(NDM1和NDM2)。NDM1同时引入啁啾效应和G-T效应产生大的群延迟色散量以减少光在负色散镜上的反射次数。NDM2仅引入G-T效应产生较小的群延迟色散以补偿腔内自相位调制带来的部分啁啾。选用离子束溅射法制备了这两种负色散镜。用分光光度计测试了它们的透射率。结果表明,所制备的负色散镜的性能与设计性能非常接近。使用这两种负色散镜进行掺钛蓝宝石激光谐振腔内色散补偿实现了飞秒脉冲锁模,获得了15 fs的超短脉冲。     

虚拟现实系统中的视觉延迟研究

视觉延迟将致虚拟现实系统的沉浸感遭到破坏，并导致用户产生运动高，对产生视觉延迟的检测延迟和成像延迟进行了研究。     

Multifunctional Fluorene‐Based Oligomers with Novel Spiro‐Annulated Triarylamine: Efficient,Stable Deep‐Blue Electroluminescence,Good Hole Injection,and Transporting Materials with Very High Tg

A series of fluorene‐based oligomers with novel spiro‐annulated triarylamine structures, namely DFSTPA, TFSTPA, and TFSDTC, are synthesized by a Suzuki cross‐coupling reaction. The spiro‐configuration molecular structures lead to very high glass transition temperatures (197–253 °C) and weak intermolecular interactions, and consequently the structures retain good morphological stability and high fluorescence quantum efficiencies(0.69–0.98). This molecular design simultaneously solves the spectral stability problems and hole‐injection and transport issues for fluorene‐based blue‐light‐emitting materials. Simple double‐layer electroluminescence (EL) devices with a configuration of ITO/TFSTPA (device A) or TFSDTC (device B)/ TPBI/LiF/Al, where TFSTPA and TFSDTC serve as hole‐transporting blue‐light‐emitting materials, show a deep‐blue emission with a peak around 432 nm, and CIE coordinates of (0.17, 0.12) for TFSTPA and (0.16, 0.07) for TFSDTC, respectively, which are very close to the National Television System Committee (NTSC) standard for blue (0.15, 0.07). The maximum current efficiency/external quantum efficiencies are 1.63 cd A^?1/1.6% for device A and 1.91 cd A^?1/2.7% for device B, respectively. In addition, a device with the structure ITO/DFSTPA/Alq₃/LiF/Al, where DFSTPA acts as both the hole‐injection and ‐transporting material, is shown to achieve a good performance, with a maximum luminance of 14 047 cd m^?2, and a maximum current efficiency of 5.56 cd A^?1. These values are significantly higher than those of devices based on commonly usedN,N′‐di(1‐naphthyl)‐N,N′‐diphenyl‐[1,1′‐biphenyl]‐4,4′‐diamine (NPB) as the hole‐transporting layer (11 738 cd m^?2 and 3.97 cd A^?1) under identical device conditions.     

加强电子产品热设计、热分析能力建设

论述了加强电子产品热设计的意义 ,介绍了国内热设计水平现状和信息产业部电子第五研究所目前所进行的前导性工作 ,提出了热分析能力建设的工程实施途径。     

基于矩阵束方法的传输线系统瞬态响应分析

带有频变负载的传输线系统的瞬态响应分析是电磁兼容领域的一个重要内容,特别是对于频变负载网络较为复杂或内部结构不清晰的情况,其瞬态响应的分析较为困难。本文首先在采样频率点处对频变负载端口导纳进行测量或计算得到相应的采样导纳,并采用有理函数逼近的方式对端口导纳进行等效;之后采用矩阵束(MPM)方法求解出有理逼近函数所需的极点和留数,并将其代入到分段线性递归卷积(PLRC)技术中,实现传输线和频变负载连接点处电压的分段线性递归卷积表达;最后,结合传输线方程实现带有频变负载的传输线系统的瞬态响应分析,并通过2个算例对所提方法的性能进行验证。结果表明,所提方法在计算精确度上具有明显的优势。     

Cloning, Expression and Purification of Wheat Acetyl-CoA Carboxylases CT Domain in E.coil

The entire gene of carboxyltransferase(CT) domain of acetyl-CoA carboxylase(ACCase) from Chinese Spring wheat(CSW) plastid was cloned firstly,and the 2.3 kb gene was inserted into PET28a+ vector and expressed in E.coil in a soluble state.The (His)6 fusion protein was identified by SDS-PAGE and Western blot.The recombinant protein was purified by affinity chromatography,and the calculated molecular mass(Mr) was 88000.The results of the sequence analysis indicate that the cloned gene(GeneBank accession No.EU124675) was a supplement and revision of the reported ACCase CT partial cDNA from Chinese Spring wheat plastid.The recombinant protein will be significant for us to investigate the recognizing mechanism between ACCase and herbicides,and further to screen new herbicides.     

光传送网故障诊断系统知识库设计与实现

首先介绍了光传送网故障诊断系统的结构,然后分析了知识库设计的三个关键性问题,即知识获取、知识表示和知识利用,重点研究了基于产生式规则的数据库知识表示法.最后利用Delphi 7.0和SQL Server 2005开发了光传送网故障诊断知识库系统,为光传送网故障诊断系统的开发和利用奠定了基础.     

硅烷化磁铁粉固定胰蛋白酶的研究

分别以硅烷化磁铁粉、硅烷磁化脱乙酰几丁质及脱乙酰几丁质作载体,甲醛或戊二醛为交联剂,对胰蛋白酶的固定化条件及所制备的固定化酶的性质进行了研究．研究了载体种类、交联剂和ｐＨ值以及载体与酶比例等因素对胰蛋白酶固定化的影响．研究了不同载体固定胰蛋白酶的特点,证明以硅烷化试剂和甲醛作交联剂的硅烷化磁铁粉作胰蛋白酶固定化的载体具有明显优点,所制备的硅烷化磁铁粉固定化胰蛋白酶酶学性质明显优于可溶性胰蛋白酶     

电机驱动微装配在双光子制备微结构中的应用

对微结构的制作、微装配系统进行了研究. 采用飞秒激光双光子聚合微加工技术制作有底座、精细的三维立体“拱形”微结构, 其高250μm、长300μm、厚50μm. 将此微结构与实验室自主搭建的二维微装配平台相结合, 利用自主编程的人机交互界面驱动步进电机, 远程操控微装配设备; 将荧光闪烁陶瓷粉末装配到微结构中, 对装配后的微结构进行荧光光谱表征发现, 纯荧光粉末和微结构中的荧光粉末的发射光谱在测量误差范围内基本一致, 表明荧光粉末的光学性质未发生改变. 利用该装置可以将各类微纳米级材料和微结构进行装配, 形成含有不同材料的微结构系统.     

双色光柱等离子体显示板技术

本文介绍了一种双色光柱等离子体显示板,阐述了彩色光柱板的基本工作结构和工作原理,对研制过程中解决的关键工艺技术问题进行了总结。