Why to synthesize vaterite polymorph of calcium carbonate on the cellulose matrix via sonochemistry process?

Vaterite is an important biomedical material due to its features such as high specific surface area, high solubility, high dispersion, and small specific gravity. The purposes of this article were to explore the growth mechanism of vaterite on the cellulose matrix via sonochmistry process. In the work reported herein, the influences of experimental parameters on the polymorph of calcium carbonate were investigated in detail. The calcium carbonate crystals on the cellulose matrix were characterized by means of X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). Experimental results revealed that all the reactants, solvent, and synthesis method played an important role in the polymorph of calcium carbonate. The pure phase of vaterite polymorph was obtained using Na₂CO₃ as reactant in ethylene glycol on the cellulose matrix via sonochmistry process. Based on the experimental results, one can conclude that the synthesis of vaterite polymorph is a system process.     

HL-2M 真空室保温层设计及安装

基于 HL-2M 真空室烘烤保温要求，通过有限元分析和原型件实验确定采用陶瓷纤维与纳米级微孔材 料组合作为 HL-2M 真空室保温材料。在 30℃时，保温层的导热系数小于 0.027W⋅m⁻¹·℃⁻¹；300℃时，导热系数 小于 0.038W⋅m⁻¹·℃⁻¹。在保温层厚度 25mm、热面温度 300℃且达到稳态时，冷面可控制在 85℃以下，线圈侧的 温度低于 60℃，整体热损失小于 12kW，满足 HL-2M 真空室烘烤需求。      

Investigating effect of pH values on CeSiW catalyst for the selective catalytic reduction of NO by NH3

Research on Chemical Intermediates - The effect of different pH values (8, 9, 10 and 11) on the catalytic activity over CeSiW catalysts was investigated for the selective catalytic reduction of NO...     

托卡马克中局域磁扰动引起的高能量离子损失研究

基于单粒子导心运动代码ORBIT，采用测试粒子模拟方法，研究了托卡马克等离子体内部不同径向位置处局域磁场扰动对高能量离子的损失的影响。研究表明，在局域磁扰动主要分布在某磁面附近、其环向具有类似纹波场形式下，可造成一些靠近等离子体中心区域的高能量离子损失，但对靠近等离子边界的离子损失影响相对不大。这些损失的高能量离子均为捕获离子，离子的投掷角越大就越容易损失。此外，造成高能量离子最大损失率的局域场径向位置与这些损失离子的初始径向位置通常存在一定的偏移，而且这个偏移与这些离子的能量密切相关。当局域场出现在某些位置时，能量较低的离子会有一定的损失，能量较高的离子反而不会损失。     

Analysis of sialic acid levels in Chinese intravenous immunoglobulins by high‐performance liquid chromatography with fluorescence detection

Intravenous immunoglobulin (IVIg) is increasingly used for the treatment of autoimmune and systemic inflammatory diseases with both licensed and off‐label indications. Recent studies indicated that IVIg‐mediated immunomodulation and anti‐inflammation are closely associated with the IgG sialylation, especially with IgG crystallizable fragment (Fc) sialylation. The sialic acid levels of the IgG molecules and Fc fragments in 12 IVIg preparations from six Chinese manufacturers were evaluated. The Fc fragments were derived from the papain digestion of IVIg, followed by affinity and size exclusion chromatography. The sialic acid levels in Fc fragments and IVIg preparations were determined by high‐performance liquid chromatography with fluorescence detection, after the sialic acid residues were released from the proteins. The results showed that the sialic acid levels in Chinese IVIg preparations ranged from 0.875 (mol/mol IgG) to 1.085 (mol/mol IgG), and the sialic acid levels in Fc fragments were from 0.321 (mol/mol Fc) to 0.361 (mol/mol Fc). Furthermore, the sialic acid levels of IVIg preparations and Fc fragments from different Chinese manufactures were significantly different. These findings will contribute to an increased understanding of Chinese IVIg preparations and the relationship between the sialic acid levels in IVIg preparations and their clinical efficacy in future clinical studies.     

Liquid crystalline epoxy resin with improved thermal conductivity by intermolecular dipole–dipole interactions

To address tremendous needs for developing efficiently heat dissipating materials with lightweights, a series of liquid crystalline epoxy resins (LCEs) are designed and synthesized as thermally conductive matrix. All prepared LCEs possess epoxies at the molecular side positions and cyanobiphenyl mesogenic end groups. Based on several experimental results such as differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction, it is found that the LCEs exhibited liquid crystalline mesophases. When LCE is cured with a diamine crosslinker, the cured LCE maintains the oriented LC domain formed in the uncured state, ascribing to a presence of dipole–diploe and π–π interactions between cyanobiphenyl mesogenic end groups. Due to the anisotropic molecular orientation, the cured LCE exhibits a high thermal conductivity of 0.46 W m^?1 K^?1, which is higher than those of commercially available crystalline or amorphous epoxy resins. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 708–715     

Palladium/Norbornene‐Catalyzed Indenone Synthesis from Simple Aryl Iodides: Concise Syntheses of Pauciflorol F and Acredinone A

To show the synthetic utility of palladium/norbornene (Pd/NBE) cooperative catalysis, here we report concise syntheses of indenone‐based natural products, pauciflorol F and acredinone A, which are enabled by direct annulation between aryl iodides and unsaturated carboxylic acid anhydrides. Compared to the previous indenone‐preparation approaches, this method allows simple aryl iodides to be used as substrates with complete control of the regioselectivity. The total synthesis of acredinone A features two different Pd/NBE‐catalyzed ortho acylation reactions for constructing penta‐substituted arene cores, including the development of a new ortho acylation/ipso borylation.     

Design and Sensing Properties of a Self‐Assembled Supramolecular Oligomer

Supramolecular polymers are a class of macromolecules stabilized by weak non‐covalent interactions. These self‐assembled aggregates typically undergo stimuli‐induced reversible assembly and disassembly. They thus hold great promise as so‐called functional materials. In this work, we present the design, synthesis, and responsive behavior of a short supramolecular oligomeric system based on two hetero‐complementary subunits. These “monomers” consist of a tetrathiafulvalene‐functionalized calix[4]pyrrole (TTF‐C[4]P) and a glycol diester‐linked bis‐2,5,7‐trinitrodicyanomethylenefluorene‐4‐carboxylate (TNDCF), respectively. We show that when mixed in organic solvents, such as CHCl₃, CH₂ClCH₂Cl, and methylcyclohexane, supramolecular aggregation takes place to produce short oligomers stabilized by hydrogen bonding and donor–acceptor charge‐transfer (CT) interactions. The self‐associated materials were characterized by ¹H NMR and UV/Vis/NIR absorption spectroscopy, as well as by concentration‐ and temperature‐dependent absorption spectroscopy and dynamic light scattering (DLS) analyses of both the monomeric and oligomerized species. The self‐associated system produced from TTF‐C[4]P and TNDCF exhibits a concentration‐dependent aggregation behavior typical of supramolecular polymers. Further support for the proposed self‐assembly came from theoretical calculations. The fluorescence emitting properties of TNDCF are quenched under conditions that promote the formation of supramolecular aggregates containing TTF‐C[4]P and TNDCF. This quenching effect has been utilized as a probe for the detection of substrates in the form of anions (i.e., chloride) and nitroaromatic explosives (i.e., 1,3,5‐trinitrobenzene). Specifically, the addition of these substrates to mixtures of TTF‐C[4]P and TNDCF produced a fluorescence “turn‐on” response.