Circuit sensitivity to interconnect variation

Deep submicron technology makes interconnect one of the main factors determining the circuit performance. Previous work shows that interconnect parameters exhibit a significant amount of spatial variation. In this work, we develop approaches to study the influence of the interconnect variation on circuit performance and to evaluate the circuit sensitivity to interconnect parameters. First, an accurate interconnect modeling technique is presented, and an interconnect model library is developed. Then, we explore an approach using parameterized interconnect models to study circuit sensitivity via a ring oscillator circuit. Finally, we present an alternative approach using statistical experimental design techniques to study the sensitivity of a large and complicated circuit to interconnect variations     

Frequency transfer function of an opto-pneumatic detector

An example of an opto-pneumatic detector's (OPD) frequency transfer function is presented for the development of an opto-pneumatic interface. The theoretical model is tested through experiments in the laboratory on a real OPD prototype. In this way many of the model's parameters are studied and evaluated, such as the dimensions of the gas chamber, the thickness of the absorbent body, and the load of the OPD. The results obtained are good and show the utility of the studies described here.     

A comparison of theoretical and empirical reflection coefficientsfor typical exterior wall surfaces in a mobile radio environment

This paper presents microwave reflection coefficient measurements at 1.9 GHz and 4.0 GHz for a variety of typical smooth and rough exterior building surfaces. The measured test surfaces include walls composed of limestone blocks, glass, and brick. Reflection coefficients were measured by resolving individual reflected signal components temporally and spatially, using a spread-spectrum sliding correlation system with directional antennas. Measured reflection coefficients are compared to theoretical Fresnel reflection coefficients, applying Gaussian rough surface scattering corrections where applicable. Comparisons of theoretical calculations and measured test cases reveal that Fresnel reflection coefficients adequately predict the reflective properties of the glass and brick wall surfaces. The rough limestone block wall reflection measurements are shown to be bounded by the predictions using the Fresnel reflection coefficients for a smooth surface and the modified reflection coefficients using the Gaussian rough surface correction factors. A simple, but effective, reflection model for rough surfaces is proposed, which is in good agreement with propagation measurements at 1.9 GHz and 4 GHz for both vertical and horizontal antenna polarizations. These reflection coefficient models can be directly applied to the estimation of multipath signal strength in ray tracing algorithms for propagation prediction     

High performance CMOS current comparator

A new high-speed CMOS current comparator is described. By changing the buffer of an existing comparator from class B to class AB operation, voltage swings are reduced, resulting in greater speed for small input currents. Simulation results employing a 1.6μm CMOS technology show the response time to a 0.1μA input current to be 11ns and the power dissipation to be 1.4mW, resulting in a five times improvement in speed/power ratio over existing high-speed current comparators     

Liquid crystal properties of some substituted pyrazines

A number of biphenyl, terphenyl analogues and ethynes which contain a pyrazine ring have been made and their liquid crystal transition temperatures, together with examples of birefringence measurements, are reported. All the 2,5-disubstituted pyrazine systems are liquid crystalline showing high birefringence values for the biphenyl and terphenyl analogues, whereas the 1,5-disubstituted systems are not liquid crystalline. The pyrazine ethyne systems exhibit very high birefringence values. X-ray diffraction has been used to identify the liquid crystal phases of 2-n-nonyloxy-5-(4'-propylbiphenyl-4-yl)pyrazine.     

A selective CVD tungsten-strapped polysilicon local interconnectiontechnology

A local interconnection technology utilizing polysilicon strapped with selective-chemical-vapor-deposited (CVD) tungsten has been developed. Both n- and p-channel MOS transistors have been successfully fabricated using this technology. Tungsten deposited on polysilicon is an attractive gate shunt and local interconnection material because of its low resistivity, immunity to dopant segregation and diffusion, and resistance to electromigration. A potential problem of this technology is the excessive diode leakage current associated with strapping shallow source/drain diodes with tungsten. The leakage is attributed to defects induced by the heavy source/drain implant, which can be effectively eliminated with a proper annealing procedure     

All-optical wavelength conversion by semiconductor opticalamplifiers

Following a brief introduction to the applications for wavelength conversion and the different available conversion techniques, the paper gives an in depth analysis of cross gain and cross phase wavelength conversion in semiconductor optical amplifiers. The influence of saturation filtering on the bandwidth of the converters is explained and conditions for conversion at 20 Gb/s or more are identified. The cross gain modulation scheme shows extinction ratio degradation for conversion to longer wavelengths. This can be overcome using cross phase modulation in semiconductor optical amplifiers that are integrated into interferometric structures. The first results for monolithic integrated interferometric wavelength converters are reviewed, and the quality of the converted signals is demonstrated by transmission of 10 Gb/s converted signals over 60 km of nondispersion shifted single mode fiber     

Distributed channel assignment strategies using coexistenceetiquettes for land based radio environment

The performance of two distributed channel assignment algorithms which use coexistence etiquettes for point to point links are considered by the authors. It has been found that selecting channels prior to transmission at the transmitter as opposed to the receiver, supports greater offered traffic with the additional advantage of a less complex protocol     

Low-delay distortion recursive (IIR) transmultiplexer

A new scheme based on using an IIR design algorithm is presented to demultiplex critically sampled QPSK channels for onboard processing (OBP) satellites. Comparisons with an existing nonrecursive (FIR) transmultiplexer (TMUX) show that the presented IIR TMUX is also a suitable candidate for consideration in future OBP applications     

H∞ control versus disturbance-observer-basedcontrol

In the motion control field, a disturbance observer-based disturbance canceling control is often used as a robust control methodology. However, this method is nothing more than an alternative design of an integral controller, and the robust stability issue cannot be directly accounted for. In this paper, an extended H_∞ control scheme is proposed as a new robust motion control method which achieves the disturbance cancellation ability and guarantees robust stability automatically