Diaminodithioether complexes of nickel(II) and palladium(II): A unique case of dealkylation of S,S′-thioether

Summary Nickel(II) and palladium(II) complexes of the 1,3-di(o-aminophenylthio) propane (H₂L¹) and 1,2-di(o-aminophenylthio)xylene (H₂L²) ligands have been prepared and characterized. The hydrobromide salt of H₂L¹ gave a 12 ligand-metal complex of Pd^II, whereas free H₂L¹ formed the usual 1:1 species. The reaction of Na₂PdCl₄ with H₂L² resulted in S,S-dealkylation of the ligand and formation of a mononuclear complex of the corresponding thiol, i.e. 2-aminobenzenethiol. NiCl₂, NiBr₂ and Ni(ClO₄)₂ did not react directly with H₂L². Ni^II is a fairly hard ion and therefore does not coordinate to the soft thioether moiety in H₂L² in the absence of soft anions which symbiotically motivate Ni^II to act as a soft acceptor. It thus does not react with H₂L² in the presence of hard ions such as Cl^–, Br^- and ClO ₄ ^– , but, the in situ reaction of the constituents produced the tetrahedral Ni^II complex, contrary to earlier reports of similar types of octahedral species.     

Spectrophotometric determination of palladium(II) with 2-diethylaminoethanethiol hydrochloride and the simultaneous determination of rhodium and palladium

2-Diethylaminoethanethiol hydrochloride is proposed for spectrophotometric determination of palladium(II). The sensitivity of the reaction is 0.0085 smg/cm² and the yellow colored complex shows absorption maxima at 258 mμ and 303 mμ. Color development is slow in the cold but complete after heating for 10–15 min. The optimum pH range is 3.5 to 5.5 and the system adheres to Beer's law between 0.2 and 16.8 p.p.m. of palladium. The average and maximum relative standard deviations were 0.60% and 1.40% respectively. Interferences due to other platinum metals were studied and a procedure is suggested for the simultaneous determination of rhodium and palladium.     

A new kinetic model for bulk polymerization of vinyl chloride based on two-phase hypothesis

A kinetic model has been developed for the bulk polymerization of vinyl chloride using Talamini's hypothesis of two-phase polymerization and a new concept of kinetic solubility which assumes that rapidly growing polymer chains have considerably greater solubility than the thermodynamic solubility of preformed polymer molecules of the same size and so can remain in solution even under thermodynamically unfavourable conditions. It is further assumed that this kinetic solubility is a function of chain length. The model yields a rate expression consistent with the experimental data for vinyl chloride bulk polymerization and moreover is able to explain several characteristic kinetic features of this system. Application of the model rate expression to the available rate data has yielded 2.36 × 10⁸l mol^?1 sec^?1 for the termination rate constant in the polymer-rich phase; as expected, this value is smaller than that reported for homogenous polymerization by a factor of 10–30.     

Synthesis and characterization of monomers and polymers of acrylated phosphonate esters derived from glycerol,D-mannitol,D-sorbitol,pentaerythritol, and dipentaerythritol

Phosphonic acid ester derivatives of glycerol, D -mannitol, D -sorbitol, pentaerythritol, and dipentaerythritol have been synthesized by transacetalation reactions with diethyl 2,2-diethoxyethylphosphonate. These phosphonated derivatives of polyols and carbohydrates have been esterified to from the corresponding methacrylates. All these compounds have been characterized on the basis of their elemental analysis and spectroscopic (infrared including FT–IR, ¹H-, ¹³C-, ³¹P-NMR, and mass) methods. Transacetalation reactions with dialkyl 2,2-dialkoxyethylphosphonate lead to the synthesis of 1,3-dioxane derivatives in the case of D -mannitol, pentaerythritol, and dipentaerythritol, whereas a mixture of both 1,3-dioxane and 1,3-dioxolane derivatives is obtained with D -sorbitol and glycerol. The methacrylates of phosphonylated polyol derivatives show the capacity to dissolve and interact with metal salts such as bismuth bromide and uranyl nitrate. Some of the polymers obtained from these monomers have been characterized on the basis of their spectral and thermal (differential scanning calorimetry) properties.     

A new route to obtain shape-controlled gold nanoparticles from Au(III)-beta-diketonates

Ligands with a beta-diketone skeleton have been employed for the first time as reductant to produce ligand stabilized gold nanoparticles of different shapes from aqueous HAuCl(4) solution. Evolution of stable gold nanoparticles follows first order (k approximately equal to 10(-2) min(-1)) kinetics with respect to Au(0) concentration. Growth of particles of different shapes (spherical or triangular or hexagonal) goes hand in hand under the influence of different beta-diketones, which have excellent capping and reducing properties. Chlorine insertion was observed to take place in the beta-diketone skeleton.     

Tractable molecular theory of transport of Lennard-Jones fluids in nanopores

We present here a tractable theory of transport of simple fluids in cylindrical nanopores, which is applicable over a wide range of densities and pore sizes. In the Henry law low-density region the theory considers the trajectories of molecules oscillating between diffuse wall collisions, while at higher densities beyond this region the contribution from viscous flow becomes significant and is included through our recent approach utilizing a local average density model. The model is validated by means of equilibrium as well nonequilibrium molecular dynamics simulations of supercritical methane transport in cylindrical silica pores over a wide range of temperature, density, and pore size. The model for the Henry law region is exact and found to yield an excellent match with simulations at all conditions, including the single-file region of very small pore size where it is shown to provide the density-independent collective transport coefficient. It is also shown that in the absence of dispersive interactions the model reduces to the classical Knudsen result, but in the presence of such interactions the latter model drastically overpredicts the transport coefficient. For larger micropores beyond the single-file region the transport coefficient is reduced at high density because of intermolecular interactions and hindrance to particle crossings leading to a large decrease in surface slip that is not well represented by the model. However, for mesopores the transport coefficient increases monotonically with density, over the range studied, and is very well predicted by the theory, though at very high density the contribution from surface slip is slightly overpredicted. It is also seen that the concept of activated diffusion, commonly associated with diffusion in small pores, is fundamentally invalid for smooth pores, and the apparent activation energy is not simply related to the minimum pore potential or the adsorption energy as generally assumed.     

Photoinduced chemical reactions on natural single crystals and synthesized crystallites of mercury(II) sulfide in aqueous solution containing naturally occurring amino acids

Photoirradiation at >300 nm of aqueous suspensions of several natural crystal specimens and synthesized crystallites of mercury(II) sulfide (HgS) induced deaminocyclization of optically active or racemic lysine into pipecolinic acid (PCA) under deaerated conditions. This is the first example, to the best of our knowledge, of photoinduced chemical reactions of natural biological compounds over natural minerals. It was found that the natural HgS crystals had activity higher than those of synthesized ones but lower than those of other sulfides of transition metals, e.g., CdS and ZnS, belonging to the same II-IV chalcogenides. In almost all of the photoreactions, decompostion of HgS occurred to liberate hydrogen sulfide (H(2)S) and Hg(2+), and the latter seemed to have undergone in-situ reductive deposition on HgS as Hg(0) after a certain induction period (24-70 h) during the photoirradiation, as indicated by the darkened color of the suspensions. The formation of PCA, presumably through combination of oxidation of lysine and reduction of an intermediate, cyclic Schiff base, could also be seen after a certain induction time of the Hg(0) formation. This was supported by the fact that the addition of small amount of Hg(2+) (0.5 wt % of HgS) increased the PCA yield by almost 2-fold. We also tried to elucidate certain aspects of the plausible stereochemical reactions in relation to the chiral crystal structure of HgS. Although, in some experiments, slight enantiomeric excess of the product PCA was observed, the excess was below or equal to the experimental error and no other supporting analytical data could not be obtained; we cannot conclude the enantiomeric photoproduction of PCA by the natural chiral HgS specimen.     

Solution-based chemical synthesis of boehmite nanofibers and alumina nanorods

This article reports an easy chemical method of synthesizing boehmite nanofibers by a modified sol-gel process involving aluminum isopropoxide precursor. Nanorods of gamma-alumina have been successfully prepared after dehydration of the viscous sol at 600 degrees C for 4 h in air. The boehmite nanofibers and gamma-alumina nanorods were characterized by X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy for surface chemistry and functional groups, scanning electron microscopy, high-resolution transmission electron microscopy with selected area electron diffraction, and energy-dispersed spectroscopy for morphology and structure identification. The length of the boehmite nanofibers was found to be more than 10 mum with a crystalline lattice structure. The mechanism of formation of the boehmite nanofibers included the preferential growth along the longitudinal axis due to interaction between the solvent molecules and the surface OH- groups of hydrogen bonds. It is also suggested that the boehmite nanofibers may have formed due to the inherent instability of the planar structure of the boehmite lattice. The diameter of the gamma-alumina nanorods was found to be less than 10 nm with a varying length in the range of 50-200 nm. Boehmite to gamma-Al2O3 transformation was attributed to the loss of water molecules by internal condensation of protons and hydroxyl ions.     

Diels-Alder chemistry at furan ring functionalized solid surfaces

A substrate-independent method for Diels-Alder chemistry at solid surfaces is described for the first time.     

Novel solid-phase extraction and preconcentration technique coupled with ICP-AES for the determination of Cr(III), Ni(II), and Zn(II) in various water samples

Newly synthesized 2-propylpiperidine-1-carbodithioate (2-PPC) was used for the extraction of Cr(III), Ni(II), and Zn(II) from various water samples. In the present investigation, the use of a syringe loaded with sorbent for the separation and enrichment of Cr(III), Ni(II), and Zn(II) prior to their determination by inductively coupled plasma-atomic emission spectrometry (ICP-AES) was proposed to substitute the batch and column techniques. The described method was compared with the column technique with respect to fastness, simplicity, recovery, and risk of contamination. The syringe was loaded with 1.0 g of sorbent in order to retain the analyte elements. Next, 7.0 mL of sample solution (pH 5.0 ± 0.2) was drawn into the syringe in 15 s and discharged over 15 s. Then, an eluent (3.0 M HCl) was drawn into the syringe and ejected back to desorb the analyte elements. At the optimum conditions, the percentage recoveries of Cr(III), Ni(II), and Zn(II) were in the range of 94.50 to 99.62% with a standard deviation (S.D.) of 0.03%. The elements could be concentrated by drawing and discharging several portions of sample successively and eluting only one time. The detailed study of various interferences proved the method to be highly selective. The risk of contamination is less than that with the column technique. The method was successfully applied to the determination of Cr(III), Ni(II), and Zn(II) in spiked and natural water samples. The results obtained are in good agreement with those obtained by the reported methods at the 95% confidence level. The text was submitted by the authors in English.