Preparation and characterization of bismaleimide/1,3-dicyanatobenzene modified epoxy intercrosslinked matrices

An intercrosslinked network of cyanate ester (CE)-bismaleimide (BMI) modified epoxy matrix system was made by using epoxy resin, 1,3-dicyanatobenzene and bismaleimide (N,N^′-bismaleimido-4,4^′-diphenyl methane) with diaminodiphenylmethane as curing agent. BMI-CE-epoxy matrices were characterised using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and heat deflection temperature (HDT) analysis. The matrices, in the form of castings, were characterised for their mechanical properties such as tensile strength, flexural strength and unnotched Izod impact test as per ASTM methods. Mechanical studies indicated that the introduction of cyanate ester into epoxy resin improves the toughness and flexural strength with reduction in tensile strength and glass transition temperature, whereas the incorporation of bismaleimide into epoxy resin influences the mechanical and thermal properties according to its percentage content. DSC thermograms of cyanate ester as well as BMI modified epoxy resin show an unimodal reaction exotherm. Electrical properties were studied as per ASTM method and the morphology of the BMI modified epoxy and CE-epoxy systems were studied by scanning electron microscope.     

An investigation on visible luminescence of Ho activated LBTAF glasses

Different concentrations of Ho³⁺-doped lead borate titanate aluminum fluoride (LBTAFHo) glasses with chemical composition of PbO-H₃BO₃-TiO₂-AlF₃-Ho₂O₃ were prepared by the melt quenching method. The spectral properties were investigated using the absorption, emission and decay measurements. The experimental oscillator strengths were calculated from the area under the absorption bands. Applying Judd-Ofelt theory, the intensity parameters (Ω_{λ=2, 4, 6}) were calculated, by the least square fit approach from which the radiative transition rates, luminescence branching ratios and radiative decay times were determined. The photoluminescence spectra revealed the quenching of luminescence intensity beyond 1.0 mol% of Ho³⁺ ion concentration. To investigate the luminescence potentiality of ⁵F₄→⁵I₈ emission level, the effective bandwidth and the stimulated emission cross-section were determined. The quenching in experimental decay time is attributed to the resonance energy transfer among the excited Ho³⁺ ions.     

Cycloaddition profile of pentafulvenes with 3-oxidopyrylium betaine: experimental and theoretical investigations

A detailed investigation on the effect of solvent polarity, temperature, and microwave irradiation on periselectivity in cycloaddition reactions of pentafulvenes with 3-oxidopyrylium betaine is described. The base catalyzed generation of 3-oxidopyrylium betaine in CHCl₃ resulted in the exclusive formation of [6+3] adducts. With increase in solvent polarity and temperature, mixtures of [6+3] and [3+2] adducts were formed, where as under microwave irradiation, [3+2] adducts were formed exclusively. The experimental results have been rationalized on the basis of theoretical calculations.     

Aptamer-based fluorometric determination of norovirus using a paper-based microfluidic device

Microchimica Acta - The authors describe a rapid and highly sensitive point-of-care device for rapid determination of noroviruses, a leading cause of acute gastroenteritis. The assay is based on...     

Effects of structural properties of silicon carbide-derived carbons on their electrochemical double-layer capacitance in aqueous and organic electrolytes

High surface area silicon carbide-derived carbons (Si-CDCs) synthesized by chlorination of beta silicon carbide (βSiC) with two different particle sizes (6 μm and 50 nm) show different porosities with graphitic structure. Transmission electron microscopy, Raman spectroscopy and argon (Ar) and carbon dioxide (CO₂) sorption analyses are used to examine the textural properties of the Si-CDCs. The results show that the particle size of the precursor affects the surface area and porosity of carbons. Furthermore, an additional heat treatment of the Si-CDC with 50-nm particle size for 24 h at 1,000 °C results in a collapse of the pore structure and reduces the surface area. The capacitive behaviours are investigated in H₂SO₄ and in tetraethyl ammonium tetrafluoroborate (TEABF₄)/acetonitrile (AN). The electrochemical performance of the Si-CDCs is influenced by the particle size, surface area, pore volume and pore size distribution. The Si-CDCs exhibit capacitances in 1 M H₂SO₄ of up to 179 F g^?1 and very stable charge–discharge performance over 5,000 cycles. This study shows the crucial importance of ultramicropores less than 1 nm combined with nanosized particles for achieving high capacitance in aqueous electrolyte. Moreover, the graphitic degree at the surface of the Si-CDCs enhances considerably the rate capability and stability in both electrolytes.     

A Novel Synthesis of 5-Aryltropoxe Derivatives

The reaction of substituted arylboronic acids with 5-bromo-2-methoxytropone catalyzed by palladium(0) complex furnished 5-arylated tropone derivatives in good yield.