Nanodiamond-based two-step sampling of multiply and singly phosphorylated peptides for MALDI-TOF mass spectrometry analysis

Simultaneous detection of multiply and singly phosphorylated peptides using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) is challenging because of suppression effects during ionization. In oder to overcome this problem, this study presents a new approach to improve the detection of phosphopeptides by stepwise enrichment using polyarginine-coated (PA-coated) and titanium dioxide-coated (TiO(2)-coated) nanodiamonds for fractionation of multiply and singly phosphorylated peptides prior to on-probe MALDI MS analysis. The feasibility of this approach was demonstrated using synthetic peptides containing different numbers of phosphate groups, tryptic digests of α-casein, β-casein, and complex protein mixtures. The high specificity of the approach is shown in its effective enrichment and fractionation of phosphopeptides from the digest of β-casein and bovine serum albumin at a molar ratio as low as 1 : 1000, which out-performs the commercial Fe(3+)-IMAC and TiO(2) isolation kits. It offers a simple and effective alternative for the fractionation and identification of multiply and singly phosphorylated peptides by MALDI MS and allows for deduction of more information from limited starting materials.     

Enhancement of surface wettability via the modification of microtextured titanium implant surfaces with polyelectrolytes

Micrometer- and submicrometer-scale surface roughness enhances osteoblast differentiation on titanium (Ti) substrates and increases bone-to-implant contact in vivo. However, the low surface wettability induced by surface roughness can retard initial interactions with the physiological environment. We examined chemical modifications of Ti surfaces [pretreated (PT), R(a) ≤ 0.3 μm; sand blasted/acid etched (SLA), R(a) ≥ 3.0 μm] in order to modify surface hydrophilicity. We designed coating layers of polyelectrolytes that did not alter the surface microstructure but increased surface ionic character, including chitosan (CHI), poly(L-glutamic acid) (PGA), and poly(L-lysine) (PLL). Ti disks were cleaned and sterilized. Surface chemical composition, roughness, wettability, and morphology of surfaces before and after polyelectrolyte coating were examined by X-ray photoelectron spectroscopy (XPS), contact mode profilometry, contact angle measurement, and scanning electron microscopy (SEM). High-resolution XPS spectra data validated the formation of polyelectrolyte layers on top of the Ti surface. The surface coverage of the polyelectrolyte adsorbed on Ti surfaces was evaluated with the pertinent SEM images and XPS peak intensity as a function of polyelectrolyte adsorption time on the Ti surface. PLL was coated in a uniform thin layer on the PT surface. CHI and PGA were coated evenly on PT, albeit in an incomplete monolayer. CHI, PGA, and PLL were coated on the SLA surface with complete coverage. The selected polyelectrolytes enhanced surface wettability without modifying surface roughness. These chemically modified surfaces on implant devices can contribute to the enhancement of osteoblast differentiation.     

A novel supermolecular tetrameric vanadate-selective colorimetric and "off-on" sensor with pyrene ligand

Tris(2-((ethylimino)methyl)pyren-1-ol)amine (1) was synthesized and introduced as the first tetrameric vanadate fluorescence sensor, the entire binding of which was successfully accomplished in two steps with distinct colorimetric changes and "off-on" fluorescent enhancement.     

Plasmon coupling of R6G-linked gold nanoparticle assemblies for surface-enhanced Raman spectroscopy

This paper presents the study of surface-enhanced Raman scattering (SERS) for Rhodamine 6G (R6G)-linked gold (Au) assemblies. The nano-assemblies fabricated with Au nanoparticles, having diameters (D) of ～5–40 nm, possessed interparticle gaps of ～0.03–0.2D, respectively. The R6G-linked Au assemblies displayed weak spectral shifts of localized surface plasmon resonance (LSPR) mode at shorter wavelength region and large fractional red-shifts Δλ ～ 0.07–0.47λ_o at longer wavelength region. The resonant spectral coupling of the nano-assemblies LSPR mode at the longer wavelength region and the optical excitation at ～785 nm, in addition to the highly localized hot spots, could support the large SERS enhancement of R6G-linked Au assemblies.     

Solid-phase synthesis of enantio-controlled lactic acid oligomers

A synthetic method for lactic acid oligomers via solid-phase synthesis under mild reaction conditions with up to 99% yield is presented. The fine control of the chirality on each lactic acid unit of the oligomers was easily achieved by the substitution of (R)-THP-protected lactic acid (R)-2 by (S)-2 without alternating the procedure. The overall synthesis of the trimer and tetramer was completed in one and two days, respectively. Intramolecular cyclizations of enantio-controlled lactic acids were also attempted through the Yamaguchi macrolactonization or the Mitsunobu reaction. However, we were unable to isolate single cyclic oligomers but always obtained a mixture of cyclic oligomers.     

An analytical method for prohexadione in Chinese cabbage and apple

A residual determination method as a regulatory residue method was developed using HPLC‐UVD for prohexadione residues in Chinese cabbage (Brassica pekinensis) and apple (Malus domestica). The developed method consisted of solid–liquid extraction with acidic acetonitrile and ion‐suppression liquid–liquid partitioning, followed by anion exchange cartridge cleanup. The limits of detection and quantitation for the method were 0.005 and 0.02 mg/kg, respectively. The method gave good linearity in the range of 0.02–2.5 mg/kg. Accuracy and precision ranged from 84.1 to 94.1% and from 2.4 to 6.9%, respectively. Additionally, the confirmative conditions of LC‐MS/MS for prohexadione were set in negative electrospray ionization mode with transitions of m/z 211.4 → 167.5 and m/z 211.4 → 123.5 in the selected reaction monitoring mode. The applicability of the method was demonstrated by analyzing real samples collected from local markets in Seoul, Republic of Korea. This developed method fully deserves consideration in accordance with its sensitivity, accuracy and precision required for residue analysis of prohexadione in Chinese cabbages and apples. Copyright © 2010 John Wiley & Sons, Ltd.     

Two‐Photon Fluorescent Probes for Metal Ions

Two‐photon microscopy (TPM) has become an indispensible tool in biology and medicine owing to the capability of imaging the intact tissue for a long period of time. To make it a versatile tool in biology, a variety of two‐photon probes for specific applications are needed. In this context, many research groups are developing two‐photon probes for various applications. In this Focus Review, we summarize recent results on model studies and selected examples of two‐photon probes that can detect intracellular free metal ions in live cells and tissues to provide a guideline for the design of useful two‐photon probes for various in vivo imaging applications.     

Treatment of TiO2 with COOH‐Functionalized Germanium Nanoparticles to Enhance the Photocurrent of Dye‐Sensitized Solar Cells

A dye‐sensitized solar cell (DSSC) containing a TiO₂ film treated with COOH‐functionalized germanium nanoparticles (Ge COOH Nps) exhibited a higher short‐circuit photocurrent density (J_sc; 15.4 mA cm⁻²) compared to the corresponding untreated DSSC (13.4 mA cm⁻²) using N719 and a 12 μm thick TiO₂ film at 100 mW cm⁻². The amount of N719 attached to the treated TiO₂ film was 21 % greater than that attached to the untreated TiO₂ film. Enhancement of the J_sc value by 15 % was attributed mostly to an intramolecular charge transfer from N719 attached to the Ge COOH Nps to the TiO₂ conduction band through the Ge COOH Nps.