Characteristics of ZnO–B2O3–CaO–Na2O–P2O5 glass powders prepared by spray pyrolysis

Fine-sized ZnO–B₂O₃–CaO–Na₂O–P₂O₅ glass powders with spherical shape were directly prepared by high temperature spray pyrolysis. The ZnO–B₂O₃–CaO–Na₂O–P₂O₅ powders prepared by spray pyrolysis at temperatures above 1200 °C had broad peaks at around 30° in the XRD patterns. The glass transition temperatures (T_g) of the glass powders obtained by spray pyrolysis at preparation temperatures between 900 °C and 1400 °C were near 480 °C regardless of the preparation temperatures. The dielectric layers formed from the glass powders prepared by spray pyrolysis at preparation temperatures above 1300 °C had clean surface and dense inner structure at the firing temperature of 580 °C. The transmittance of the dielectric layer formed from the glass powders obtained by spray pyrolysis at preparation temperature of 1400 °C was 90% at the firing temperature of 580 °C, in which the thickness of the dielectric layer was 13 μm. The UV cutoff edges gradually shift towards longer wavelength with increasing the preparation temperature of glass powders and the firing temperature of dielectric layers.     

Synthesis of poly(p‐phenylenediamine‐ co‐o‐aminophenol)/multi‐walled carbon nanotube composites by emulsion polymerization

Organic–inorganic composites composed of electrically conducting copolymer p‐phenylenediamine‐ co‐o‐aminophenol and carboxylic acid functionalized multi‐walled carbon nanotubes [poly(pPD‐co‐oAP)/c‐MWNTs] were prepared via in situ emulsion pathway using sodium dodecyl sulphate (SDS) as an emulsifier and potassium persulphate as an oxidant. Acid functionalized MWNTs were used as cores in the formation of tubular shells of the composites. TEM and FESEM analysis showed that a tubular layer of coated copolymer film of several nanometer thicknesses is present on the c‐MWNTs surfaces. FT‐IR spectra endorsed the formation of composites. TGA results indicated that the decomposition temperatures of composites were higher than the bare copolymer. UV‐visible absorption spectra of diluted colloidal dispersion of composites were similar to those of the bare copolymer. The composites were also confirmed by XRD and XPS. Room‐temperature conductivity increases with an increasing fraction of c‐MWNTs. Copyright © 2009 John Wiley & Sons, Ltd.     

Photo‐ and pH‐Tunable Multicolor Fluorescent Nanoparticle‐Based Spiropyran‐ and BODIPY‐Conjugated Polymer with Graphene Oxide

We report a stimuli‐responsive fluorescent nanomaterial, based on graphene oxide coupled with a polymer conjugated with photochromic spiropyran (SP) dye and hydrophobic boron dipyrromethane (BODIPY) dye, for application in triggered target multicolor bioimaging. Graphene oxide (GO) was reduced by catechol‐conjugated polymers under mildly alkaline conditions, which enabled to formation of functionalized multicolor graphene nanoparticles that can be induced by irradiation with UV light and by changing the pH from acidic to neutral. Investigation of these nanoparticles by using AFM, fluorescence emission, and in vitro cell and in vivo imaging revealed that they show different tunable colors in bioimaging applications and, more specifically, in cancer‐cell detection. The stability, biocompatibility, and quenching efficacy of this nanocomposite open a different perspective for cell imaging in different independent colors, sequentially and simultaneously.     

Simple fabrication of a smart microarray of polystyrene microbeads for immunoassay

We describe a simple method to fabricate an array of polystyrene microbeads (PS μbeads) conjugated with an elastin-like polypeptide (ELP) on a glass surface using a removable polymer template (RPT). A thin layer of adhesive was spun-cast on glass and cured by UV radiation. Micropatterns of an RPT were then transferred onto the surface by microcontact printing. The adhesion of PS μbeads on the surface depended on the adhesion performance of the adhesive layer, which could be adjusted by irradiation time. An array of PS μbeads conjugated with ELP was used for a smart immunoassay of prostate-specific antigen (PSA), a cancer marker. By controlling the phase transition of ELP molecules, PSA molecules were selectively adhered or released from the bead surface. The selective and reversible binding of PSA molecules on the bead surface was characterized with fluorescence microscopy.     

Styrene‐N‐phenylacrylamide co‐polymer modified silica monolith particles with an optimized mixing ratio of monomers as a new stationary phase for the separation of peptides in high performance liquid chromatography

A stationary phase was prepared by chemical derivatization of the support particles with a layer of copolymer composed of styrene and N‐phenyl acrylamide. Silica monolith particles of ca. 2.6 µm (volume‐based average) have been prepared as the support particles by sol‐gel reaction followed by differential sedimentation. The particles were reacted with 3‐chloropropyl trimethoxysilane followed by sodium diethyldithiocarbamate to introduce an initiator moiety. Then, the copolymer layer was immobilized via reversible addition‐fragmentation transfer polymerization. The resultant phase was packed in glass‐lined stainless‐steel micro‐columns (1 x 150 mm) and evaluated for the separation of a mixture composed of five peptides (Trp‐Gly, Thr‐Tyr‐Ser, angiotensin I, isotocin and bradykinin). The effect of monomer mixing ratio (styrene versus N‐phenyl acrylamide) on the chromatographic separation efficiency of the stationary phase was examined. A number of theoretical plates (N) as high as 33 600 plates/column (224 000 plates/m, 4.46 µm plate height) was achieved using the column packed with the optimized stationary phase. The column‐to‐column reproducibility based on three columns packed with three different batches of stationary phase was found satisfactory in separation efficiency, retention factor, and asymmetry factor.     

Development of the Base Station Controller and Manager in the CDMA Mobile System

The base station (BS) in the CDMA Mobile System (CMS) connects calls through the radio interface and is designed to provide mobile subscribers with high quality service in spite of mobile subscribers’ motions. The BS consists of multiple base station transceiver subsystems (BTSs), a base station controller (BSC) and a base station manager (BSM). This paper is concerned with the BSC and the BSM. The BSC is located between the BTSs and the mobile switching center (MSC) connected with the public network, and is responsible for controlling mobile calls from and to mobile subscribers via the BTSs. The BSM provides operator-interfaces per the BS and takes responsibility of operation and maintenance (OAM) of the BS. Design of the BSC is based on two module types: functional module and unit module. The functional module is used to support new services easily and the unit module to increase the system capacity economically. Both modular types are easily achieved by inserting the corresponding modules to the system. Particularly, in order to efficiently support the soft handover which is one of CDMA superior advantages, the BSC adopts a large high-speed packet switch connecting up to 512 BTSs, and thus mobile subscribers can be provided with soft handover in high probability. The BSM is based on a commercial workstation to support OAM functions efficiently and guarantee high reliability of the functions. The BSM uses graphical user interface (GUI) for efficient OAM functions of the BS.     

Neural network impedance force control of robot manipulator

The performance of an impedance controller for robot force tracking is affected by the uncertainties in both the robot dynamic model and environment stiffness. The purpose of this paper is to improve the controller robustness by applying the neural network (NN) technique to compensate for the uncertainties in the robot model. NN control techniques are applied to two impedance control methods: torque-based and position-based impedance control, which are distinguished by the way of the impedance functions being implemented. A novel error signal is proposed for the NN training. In addition, a trajectory modification algorithm is developed to determine the reference trajectory when the environment stiffness is unknown. The robustness analysis of this algorithm to force sensor noise and inaccurate environment position measurement is also presented. The performances of the two NN impedance control schemes are compared by computer simulations. Simulation results based on a three-degrees-of-freedom robot show that highly robust position/force tracking can be achieved in the presence of large uncertainties and force sensor noise     

Estrogenic Activity of Mycoestrogen (3β,5α,22E)-Ergost-22-en-3-ol via Estrogen Receptor α-Dependent Signaling Pathways in MCF-7 Cells

Armillariella tabescens (Scop.) Sing., a mushroom of the family Tricholomataceae, has been used in traditional oriental medicine to treat cholecystitis, improve bile secretion, and regulate bile-duct pressure. The present study evaluated the estrogen-like effects of A. tabescens using a cell-proliferation assay in an estrogen-receptor-positive breast cancer cell line (MCF-7). We found that the methanol extract of A. tabescens fruiting bodies promoted cell proliferation in MCF-7 cells. Using bioassay-guided fractionation of the methanol extract and chemical investigation, we isolated and identified four steroids and four fatty acids from the active fraction. All eight compounds were evaluated by E-screen assay for their estrogen-like effects in MCF-7 cells. Among the tested isolates, only (3β,5α,22E)-ergost-22-en-3-ol promoted cell proliferation in MCF-7 cells; this effect was mitigated by the ER antagonist, ICI 182,780. The mechanism underlying the estrogen-like effect of (3β,5α,22E)-ergost-22-en-3-ol was evaluated using Western blot analysis to detect the expression of extracellular signal-regulated kinase (ERK), phosphatidylinositol 3-kinase (PI3K), Akt, and estrogen receptor α (ERα). We found that (3β,5α,22E)-ergost-22-en-3-ol induced an increase in phosphorylation of ERK, PI3K, Akt, and ERα. Together, these experimental results suggest that (3β,5α,22E)-ergost-22-en-3-ol is responsible for the estrogen-like effects of A. tabescens and may potentially aid control of estrogenic activity in menopause.     

A Novel Data Transmission Scheme for ATSC Terrestrial DTV Systems

In Advanced Television Systems Committee (ATSC) terrestrial digital television (DTV) systems, additional very low‐rate data can be transmitted by modulating the amplitude and polarity of the transmitter identification (TxID) signal. Although the additional data transmission scheme offers reliable transmission and has a very large coverage area, it has a limitation on the data rate. In this paper, we propose a novel additional data transmission scheme based on the TxID sequences of the ATSC DTV system and Walsh modulation. The proposed scheme not only increases the data rate significantly, but also offers a virtually identical coverage area compared to a conventional scheme.