Regiospecific synthesis of mono- and bicyclic 6-alkoxy-2-pyrones and their use in the preparation of substituted aromatics,anthraquinones, and tetracyclic intermediates for 11-deoxyanthracycline synthesis

Several mono- and bicyclic 6-methoxy-2-pyrones having substituents at C4 and C5 can be prepared regiospecifically by either of two routes: (1) regiospecific construction of a glutaconic half-ester followed by dehydrative cyclization, and (2)regiospecific Friedel-Crafts acylation of 6-methoxy-2-pyrones at C5. These pyrones undergo clean and regiospecific Diels-Alder cycloadditions with various unsymmetrical dienophiles, e.g., quinones, unsaturated esters, etc, with subsequent loss of carbon dioxide. In this manner several polycyclic aromatic natural products have been prepared such as chrysophanol, helminthosporin, pachybasin, 2-acetylemodin and the purported structure for orientalone. The utility of this approach for the synthesis of the anthracyclines is demonstrated by its use in the preparation of various tetracyclic intermediates for anthracycline synthesis.     

Synthesis,crystal structure,magnetism, and absorption spectra of A2UX5 Type Halides (A = K,Rb; X = Cl,Br, I)

The ternary uranium(III) halides A₂UX₅ (A = K, Rb; X = Cl, Br, I) have been prepared from the binary components AX and UX₃ in sealed tantalum containers. According to their Guinier X-ray powder patterns, they all crystallize with the K₂PrCl₅/Y₂HfS₅ type of structure. Lattice constants for ambient temperature are reported. Single-crystal structure refinemens were undertaken for K₂UI₅ and Rb₂UCl₅. Magnetic susceptibility data were recorded with a SQUID magnetometer from liquid helium to room temperature. One-dimensional (intrachain) and three-dimensional antiferromagnetic ordering occur at low temperatures dependent upon the U³⁺? U³⁺ distance. Absorption spectra were recorded between 4 000 and 28 000 cm^?1. They show f—f transitions typical for U³⁺ and, depending on the halide, very strong f—d transitions above 14 000 to 15 000 cm^?1, respectively.     

Substitution and oxidation reactions of bis(dithiolene)tungsten complexes of potential relevance to enzyme sites

Structurally characterized tungstoenzymes contain mononuclear active sites in which tungsten is coordinated by two pterin-dithiolene ligands and one or two additional ligands that have not been identified. In this and prior investigations (Sung, K.-M.; Holm, R. H. Inorg. Chem. 2000, 39, 1275; J. Am. Chem. Soc. 2001, 123, 1931), stable coordination units of bis(dithiolene)tungsten(IV,V,VI) complexes potentially related to enzyme sites have been sought by exploratory synthesis. In this work, additional members of the sets [WL(S2C2Me2)2](2-,-) and [WLL'(S2C2Me2)2](2-,-) have been prepared and structurally characterized. Tungsten(IV) complexes obtained by substitution are carbonyl displacement products of [W(CO)2(S2C2Me2)2] and include those with the groups W(IV)S (4), W(IV)(O2CPh) (5), and W(IV)(2-AdQ)(CO) (Q = S (6), Se (7); Ad = adamantyl). Those obtained by oxidation reactions contain the groups W(V)O (9), W(V)(QPh)2 (Q = S (10), Se (11)), W(VI)S(OPh) (12), and W(VI)O2 (14). The latter two complexes were obtained from W(IV) precursors using sulfur and oxygen atom transfer reactions, respectively. Complexes 4 and 9 are square pyramidal; 6, 7, 10, and 11 are distorted trigonal prismatic with cis ligands LL'; and 12 and 14 are distorted octahedral. Complexes 4, 10, and 11 support three-membered electron transfer series. Attempts to oxidize 4 to the W(V)S complex results in the formation of binuclear [W2(mu2-S)2(S2C2Me2)4](2-) having distorted octahedral coordination. The 21 known functional groups WL and WLL' in mononuclear bis(dithiolene) complexes prepared in this and prior investigations are tabulated. Of those with physiological-type ligands, it remains to be seen which (if any) of these ligation modes are displayed by enzyme sites.     

Cure behavior and thermal stability of an epoxy: new bismaleimide blends for composite matrices

A new bismaleimide (BMI) resin was synthesized to formulate epoxy(tetraglycidyl diaminodiphenyl methane; TGDDM) – bismaleimide thermoset blends for composite matrix applications. 4,4′-diaminodiphenyl methane (DDM) was used as an amine curing agent for the TGDDM. A Fourier transform infrared (FTIR) spectroscopy was employed to characterize the new BMI resin. Cure behavior of the epoxy–BMI blends was studied using a differential scanning calorimeter (DSC). DSC thermograms of the thermoset blends indicated two exothermic peaks. The glass transition temperature of the thermoset blends decreased with BMI content. Thermogravimetric analysis (TGA) was carried out to investigate thermal degradation behavior of the cured epoxy–BMI thermoset blends. The new BMI resin reacted partially with the DDM and weak intercrosslinking polymer networks were formed during cure of the thermoset blends.     

Sequential injection analysis system for on-line monitoring of l-cysteine concentration in biological processes

A sequential injection analysis (SIA) system was developed to monitor the concentration of l-cysteine in biological processes on-line. It is based on the redox reaction of l-cysteine with iron(III) in the presence of 1,10-phenanthroline (phen) and the detection of the red-iron(II)-phen complex with a spectrophotometry. The system was fully automated using software written in the LabVIEW™ development environment. A number of system variables such as the flow rate of the carrier buffer solution, the volume ratio of the sample to the reagents, and the reaction coil length, etc., were evaluated to increase the sensitivity and performance of the SIA system. Under partially optimized operating conditions the performance of the SIA system was linear up to a concentration of l-cysteine of 1 mM (R² = 0.998) with a detection limit of 0.005 mM and a sample frequency of 15 hr⁻¹. The SIA system was employed to monitor the concentration of l-cysteine on-line in a continuously stirred reactor and a fermentation process of Saccharomyces cerevisiae. The on-line monitored data were in good agreement with the off-line data measured by a HPLC with a fluorescence detector (n = 15, R² = 09899).     

Reactions of N-silylphosphoranimines with alcohols: synthesis and structure of cyclotriphosphazenes with nongeminal methyl and phenyl substituents

The reactions of Me(3)SiN=P(OR")RR'(R" = Ph, CH(2)CF(3); R, R' = Me, Ph) with alcohols were investigated. With nonequivalent amounts of CF(3)CH(2)OH, the reactions produced high yields of the cyclic phosphazene (Me(2)PN)(3) and both the cis and trans isomers of nongeminally substituted [(Ph)(Me)PN](3). The isomers of this new cyclic phosphazene were separated by column chromatography and characterized by NMR and IR spectroscopy, elemental analysis, and X-ray crystallography. Crystals of the cis isomer 6a have a monoclinic crystal system, while the trans isomer 6b has a triclinic crystal system with two different molecules in an asymmetric unit. The bond lengths and bond angles are very similar to those of the simpler cyclic trimers (Me(2)PN)(3) and (Ph(2)PN)(3.) A likely pathway for the formation of these compounds is discussed.     

Experimental evidence of structural transition from fcc to bulk bcc in nanophase metal clusters of (Fe)n, (Cr)n, (Mo)n and (W)n produced by CO2 laser multiphoton decomposition of metal carbonyls

We have produced nanophase metal clusters, (Fe)_n, (Cr)_n, (Mo)_n and (W)_n, by multiphoton decomposition of the corresponding metal carbonyls with a 10.6 μm CO₂ laser in the presence of Ar and SF₆. The size distribution was narrow and the average diameter was 6, 3.5, 2 and 1 nm for Fe, Cr, Mo and W clusters, respectively. The structure was found to be bcc for both Fe and Cr clusters, fcc for Mo clusters, and amorphous for W clusters (note that all the bulk metals have bcc structure). Considering the cluster sizes (9630, 1870, 230 and 30 for Fe, Cr, Mo and W clusters, respectively) estimated from their average diameters, it is likely that there exists a structural transition from fcc to bulk bcc with increasing cluster size in these metal clusters.     

Six-coordinate and five-coordinate Fe(II)(CN)(2)(CO)(x) thiolate complexes (x = 1, 2): synthetic advances for iron sites of [NiFe] hydrogenases

The dicyanodicarbonyliron(II) thiolate complexes trans,cis-[(CN)(2)(CO)(2)Fe(S,S-C-R)](-) (R = OEt (2), N(Et)(2) (3)) were prepared by the reaction of [Na][S-C(S)-R] and [Fe(CN)(2)(CO)(3)(Br)](-) (1). Complex 1 was obtained from oxidative addition of cyanogen bromide to [Fe(CN)(CO)(4)](-). In a similar fashion, reaction of complex 1 with [Na][S,O-C(5)H(4)N], and [Na][S,N-C(5)H(4)] produced the six-coordinate trans,cis-[(CN)(2)(CO)(2)Fe(S,O-C(5)H(4)N)](-) (6) and trans,cis-[(CN)(2)(CO)(2)Fe(S,N-C(5)H(4))](-) (7) individually. Photolysis of tetrahydrofuran (THF) solution of complexes 2, 3, and 7 under CO led to formation of the coordinatively unsaturated iron(II) dicyanocarbonyl thiolate compounds [(CN)(2)(CO)Fe(S,S-C-R)](-) (R = OEt (4), N(Et)(2) (5)) and [(CN)(2)(CO)Fe(S,N-C(5)H(4))](-) (8), respectively. The IR v(CN) stretching frequencies and patterns of complexes 4, 5, and 8 have unambiguously identified two CN(-) ligands occupying cis positions. In addition, density functional theory calculations suggest that the architecture of five-coordinate complexes 4, 5, and 8 with a vacant site trans to the CO ligand and two CN(-) ligands occupying cis positions serves as a conformational preference. Complexes 2, 3, and 7 were reobtained when the THF solution of complexes 4, 5, and 8 were exposed to CO atmosphere at 25 degrees C individually. Obviously, CO ligand can be reversibly bound to the Fe(II) site in these model compounds. Isotopic shift experiments demonstrated the lability of carbonyl ligands of complexes 2, 3, 4, 5, 7, and 8. Complexes [(CN)(2)(CO)Fe(S,S-C-R)](-) and NiA/NiC states [NiFe] hydrogenases from D. gigas exhibit a similar one-band pattern in the v(CO) region and two-band pattern in the v(CN) region individually, but in different positions, which may be accounted for by the distinct electronic effects between [S,S-C-R](-) and cysteine ligands. Also, the facile formations of five-coordinate complexes 4, 5, and 8 imply that the strong sigma-donor, weak pi-acceptor CN(-) ligands play a key role in creating/stabilizing five-coordinate iron(II) [(CN)(2)(CO)Fe(S,S-C-R)](-) complexes with a vacant coordination site trans to the CO ligand.     

Comparative investigation on non-IPR C68 and IPR C78 fullerenes encaging Sc3N molecules

A computational study on the experimentally detected Sc(3)N@C(68) cluster is reported, involving quantum chemical analysis at the B3LYP/6-31G level. Extensive computations were carried out on the pure C(68) cage which does not conform with the isolated pentagon rule (IPR). The two maximally stable C(68) isomers were selected as initial Sc(3)N@C(68) cage structures. Full geometry optimization leads to a confirmation of an earlier assessment of the Sc(3)N@C(68) equilibrium geometry (Nature 2000, 408, 427), namely an eclipsed arrangement of Sc(3)N in the C(68) 6140 frame, where each Sc atom interacts with one pentagon pair. From a variety of theoretical procedures, a D(3h) structure is proposed for the free Sc(3)N molecule. Encapsulated into the C(68) enclosure, this unit is strongly stabilized with respect to rotation within the cage. The complexation energy of Sc(3)N@C(68) cage is found to be in the order of that determined for Sc(3)N@C(80) and exceeding the complexation energy of Sc(3)N@C(78). The cage-core interaction is investigated in terms of electron transfer from the encapsulated trimetallic cluster to the fullerene as well as hybridization between these two subsystems. The stabilization mechanism of Sc(3)N@C(68) is seen to be analogous to that operative in Sc(3)N@C(78). For both cages, C(68) and C(78), inclusion of Sc(3)N induces aromaticity of the cluster as a whole.     

Dynamic identification of phosphopeptides using immobilized metal ion affinity chromatography enrichment, subsequent partial beta-elimination/chemical tagging and matrix-assisted laser desorption/ionization mass spectrometric analysis

The enrichment of phosphopeptides using immobilized metal ion affinity chromatography (IMAC) and subsequent mass spectrometric analysis is a powerful protocol for detecting phosphopeptides and analyzing their phosphorylation state. However, nonspecific binding peptides, such as acidic, nonphosphorylated peptides, often coelute and make analyses of mass spectra difficult. This study used a partial chemical tagging reaction of a phosphopeptide mixture, enriched by IMAC and contaminated with nonspecific binding peptides, following a modified beta-elimination/Michael addition method, and dynamic mass analysis of the resulting peptide pool. Mercaptoethanol was used as a chemical tag and nitrilotriacetic acid (NTA) immobilized on Sepharose beads was used for IMAC enrichment. The time-dependent dynamic mass analysis of the partially tagged reaction mixture detected intact phosphopeptides and their mercaptoethanol-tagged derivatives simultaneously by their mass difference (-20 Da for each phosphorylation site). The number of new peaks appearing with the mass shift gave the number of multiply phosphorylated sites in a phosphopeptide. Therefore, this partial chemical tagging/dynamic mass analysis method can be a powerful tool for rapid and efficient phosphopeptide identification and analysis of the phosphorylation state concurrently using only MS analysis data.