Locoselective [4 + 2] Cycloadditions of Vinylindoles with Inverse Electron Demand: A new access of indolyl-substituted and annellated pyridazines

2-Vinylindole ( 1a ) and its donor- and acceptor-substituted (E)-derivatives 1b – e react highly locoselectively with dimethyl 1,2,4,5-tetrazine-3,6-dicarboxylate ( 3 ) to form the novel (indol-2-yl)-1,4-dihydropyridazines 4a and 7 as well as the heterocyclic annellated pyridazines 4b , 5 , and 6 . The reactions of the structurally related 3-vinylindoles 2a – e with 3 also gave rise to new indol-3-ylpyridazines 8 , 9 , and 10 . The locoselectivities of these Diels-Alder reactions were controlled mainly by steric effects.     

Conversion of 3-benzoyl-1-methyl-4-phenyl-γ-piperidol by arylamines and arylhydrazines. Synthesis of 3-arylamino-1-oxo-1-phenylpropanes and 1,3-diarylpyrazoles and their fragmentation under electron impact

It has been established that on heating, 3-benzoyl-4-hydroxy-1-methyl-4-phenylpiperidine is ring-opened in the presence of arylamines by a type of retroaldol reaction, with subsequent transamination of the intermediate Mannich base and the formation of 3-arylamino-1-oxo-1-phenylpropanes. When using arylhydrazines this γ-piperidol is recyclized with the formation of 1,3-diarylpyrazoles and their 4,5-dihydro derivatives. The mass spectral behavior of a series of 3-arylamino-substituted 1-phenylpropanones has been studied. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1486–1495, October, 2007.     

Structures and properties of self-assembled monolayers of bistable [2]rotaxanes on Au (111) surfaces from molecular dynamics simulations validated with experiment

Bistable [2]rotaxanes display controllable switching properties in solution, on surfaces, and in devices. These phenomena are based on the electrochemically and electrically driven mechanical shuttling motion of the ring-shaped component, cyclobis(paraquat-p-phenylene) (CBPQT(4+)) (denoted as the ring), between a tetrathiafulvalene (TTF) unit and a 1,5-dioxynaphthalene (DNP) ring system located along a dumbbell component. When the ring is encircling the TTF unit, this co-conformation of the rotaxane is the most stable and thus designated the ground-state co-conformer (GSCC), whereas the other co-conformation with the ring surrounding the DNP ring system is less favored and so designated the metastable-state co-conformer (MSCC). We report here the structure and properties of self-assembled monolayers (SAMs) of a bistable [2]rotaxane on Au (111) surfaces as a function of surface coverage based on atomistic molecular dynamics (MD) studies with a force field optimized from DFT calculations and we report several experiments that validate the predictions. On the basis of both the total energy per rotaxane and the calculated stress that is parallel to the surface, we find that the optimal packing density of the SAM corresponds to a surface coverage of 115 A(2)/molecule (one molecule per 4 x 4 grid of surface Au atoms) for both the GSCC and MSCC, and that the former is more stable than the latter by 14 kcal/mol at the optimum packing density. We find that the SAM retains hexagonal packing, except for the case at twice the optimum packing density (65 A(2)/molecule, the 3 x 3 grid). For the GSCC and MSCC, investigated at the optimum coverage, the tilt of the ring with respect to the normal is theta = 39 degrees and 61 degrees, respectively, while the tilt angle of the entire rotaxane is psi = 41 degrees and 46 degrees , respectively. Although the tilt angle of the ring decreases with decreasing surface coverage, the tilt angle of the rotaxane has a maximum at 144 A(2)/molecule (the 4 x 5 grid/molecule) of 50 degrees and 51 degrees for the GSCC and MSCC, respectively. The hexafluorophosphate counterions (PF(6)(-)) stay localized around the ring during the 2 ns MD simulation. On the basis of the calculated density profile, we find that the thickness of the SAM is 40.5 A at the optimum coverage for the GSCC and 40.0 A for MSCC, and that the thicknesses become less with decreasing surface coverage. The calculated surface tension at the optimal packing density is 45 and 65 dyn/cm for the GSCC and MSCC, respectively. This difference suggests that the water contact angle for the GSCC is larger than for the MSCC, a prediction that is verified by experiments on Langmuir-Blodgett monolayers of amphiphilic [2]rotaxanes.     

The Effect of Alkane Chain Length on the Liquid–Liquid Critical Temperatures of Oligostyrene/Linear-Alkane Mixtures

Summary. Upper critical solution temperatures (UCSTs) for liquid–liquid demixing in a set of mixtures of linear alkanes (pentane (N ₁=5) to pentacontane (N ₁=50)) with an oligostyrene (1241amu, N ₂=12) are reported. We find strong correlation between the Hildebrand solubility parameters of the alkanes and the UCST. Correlations are developed which enable predictions concerning the miscibility of mixtures of compounds with longer chains.     

高速逆流色谱与质谱联用在中药分析中的应用

高速逆流色谱 ( High- speed countercurrent chromatography,HSCCC)是新型的液 -液分配色谱技术 ,它利用多层螺旋管同步行星式离心运动 ,在短时间内实现样品在互不相溶的两相溶剂系统中的高效分配 ,从而实现样品分离[1] . HSCCC分离纯化后 ,若用 MS离线检测 ,此时须挥发原 HSCCC的溶剂体系 ,才能实现样品转移 ,还可能会带来样品污染 .HSCCC与 MS的联用克服了这些缺陷 ,具有很强的实用价值 .丹参酮 A( Tashinone A)是一种结晶性菲醌类化合物 [2 ] ,在丹参乙醚提取物中含量丰富 .本文采用正己烷 -乙醚 -乙醇 -水体系 ,将 HSCC…     

Two-particle dynamics on an electrode in ac electric fields

The relative motion between pairs of negatively charged latex particles 9.7 microm in diameter and deposited on an electrode was measured by optical microscopy and image analysis. At an rms field of approximately 30 V cm(-1), the two particles moved toward each other at frequencies below 500 Hz, but they separated at 1000 Hz. In the cases of aggregation, there are several interesting characteristics. First, when the center-to-center separation of a pair was initially 6 particle radii or more apart, a transient 'incubation' period of tens of seconds was observed before the particles began to move toward each other. Second, the two particles never came into contact, rather at long times the pair maintained a stationary gap between them equal to approximately one-half the particle radius. This stationary gap between particles was also observed for the aggregation of clusters of three or more particles. Finally, the rate of approach for a pair of particles decreased as the frequency increased. Larger fields are required to move particles together in ac compared to dc fields; at 30 Hz the ac field must be 130 times greater than the dc field to achieve the same rate of approach. Taking advantage of the qualitative and quantitative differences of the cooperative motion of particles in dc vs. ac fields, one should be able to re-position particles by alternating between these two modes. We demonstrated that the same pair of particles can be brought together at low frequency (100 or 200 Hz) and then separated at high frequency (1000 Hz).     

Cyclization of 1-bromo-2,7- and 1-bromo-2,8-enynes mediated by indium

[reaction: see text] The cyclization of 1-bromo-2,7- and 1-bromo-2,8-enynes mediated by indium in DMF produced five- and six-membered cyclic compounds. Although KI was a necessary additive in the cyclization of terminal 1-bromo-2,7-enynes to give the desired products at 25 degrees C, reactions of terminal 1-bromo-2,8-enynes and internal 1-bromo-2,7-enynes with indium proceeded at 100 degrees C in DMF without KI. After cyclizations, subsequent cross-coupling reaction and iodolysis increase the usefulness of this reaction.     

Chiral polymer hosts for circularly polarized electroluminescence devices

Polymer electroluminescence devices producing circularly polarized luminescence (CP PLEDs) have valuable photonic applications. The fabrication of a CP PLED requires a polymer host that provides the appropriate chiral environment around the emitting dopant. However, chemical strategies for the design of chiral polymer hosts remain underdeveloped. We have developed new polymer hosts for CP PLED applications. These polymers were prepared through a free-radical polymerization of 3-vinylcarbazole with a chiral N-alkyl unit. This chiral unit forces the carbazole repeat units to form mutually helical half-sandwich conformers with preferred (P)-helical sense along the polymer main chain. Electronic circular dichroism measurements demonstrate the occurrence of chirality transfer from chiral monomers to achiral monomers during chain growth. The (P)-helical-sense-enriched polymer interacts diastereoselectively with an enantiomeric pair of new phosphorescent (R)- and (S)-dopants. The magnitude of the Kuhn dissymmetry factor (g_abs) for the (P)-helically-enriched polymer film doped with the (R)-dopant was found to be one order of magnitude higher than that of the film doped with the (S)-dopant. Photoluminescence dissymmetry factors (g_PL) of the order of 10⁻³ were recorded for the doped films, but the magnitude of diastereomeric enhancement decreased to that of g_abs. The chiral polymer host permits faster energy transfer to the phosphorescent dopants than the achiral polymer host. Our photophysical and morphological investigations indicate that the acceleration in the chiral polymer host is due to its longer Förster radius and improved compatibility with the dopants. Finally, multilayer CP PLEDs were fabricated and evaluated. Devices based on the chiral polymer host with the (R)- and (S)-dopants exhibit electroluminescence dissymmetry factors (g_EL) of 1.09 × 10⁻⁴ and −1.02 × 10⁻⁴ at a wavelength of 540 nm, respectively. Although challenges remain in the development of polymer hosts for CP PLEDs, our research demonstrates that chiroptical performances can be amplified by using chiral polymer hosts.

Polymer electroluminescence devices producing circularly polarized luminescence (CP PLEDs) have valuable photonic applications.     

Fourier transform infrared spectroscopy study of the effect of pH on anion and cation adsorption onto poly(acrylo‐amidino diethylenediamine)

The role of hydrogen bonding in the chemistry of transition‐metal complexes remains a topic of intense scientific and technological interest. Poly(acrylo‐amidino diethylenediamine) was synthesized to study the effects of hydrogen bonding on complexes at different pHs. The polymer was synthesized through the coupling of diethylene triamine with polyacrylonitrile fiber in the presence of AlCl₃ · 6H₂O addition. The adsorption capacity of this polymer was 11.4 mequiv/g. The ions used for the adsorption test were CrO, PO, Cu²⁺, Ni²⁺, Fe²⁺, and Ag⁺. All experiments were confirmed with Fourier transform infrared. In the study of anion adsorption, at low pHs, only ionic bonds existed, whereas at high pHs, no bonds existed. However, in the middle pH region, both ionic bonds and hydrogen bonds formed between poly(acrylo‐amidino diethylenediamine) and the chromate ion or phosphate ion. When poly(acrylo‐amidino diethylenediamine) and metal ions (Cu²⁺, Ni²⁺, Fe²⁺, and Ag⁺) formed complexes, a hydrogen‐bonding effect was not observed with Fourier transform infrared. The quantity of metal ions adsorbed onto poly(acrylo‐amidino diethylenediamine) followed the order Ag⁺ > Cu²⁺ > Fe²⁺ > Ni²⁺. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2010–2018, 2004     

Asymmetric lithiation-substitution sequences of substituted allylamines

[reaction: see text] (-)-Sparteine-mediated asymmetric lithiation-substitution sequences of 2- and 3-substituted N-(Boc)-N-(p-methoxyphenyl) allylic amines with electrophiles have been investigated. Asymmetric lithiation-substitutions of N-(Boc)-N-(p-methoxyphenyl) allylic amines 11, 12, 13, 14, and 15 provide highly enantioenriched enecarbamates in good yields. Further transformations to give aldehydes, acids, ketones, and a Diels-Alder adduct are reported. The 1,4-addition products from reactions of the lithiated allylic amines from 14 and 15 with conjugated activated alkenes gives enecarbamates with two and three stereogenic centers in good yields with high diastereomeric and enantiomeric ratios. Synthetic transformation of these products by acid hydrolysis and subsequent cyclization provide stereoselective access to bicyclic compounds containing four and five stereogenic centers with high diastereoselectivity and enantioselectivity. It is suggested that allyllithium complexes generated by asymmetric deprotonation react with most electrophiles with inversion of configuration.